Spatial Variation in the Structure of Kelp Forest Communities Along a Wave Exposure Gradient

Abstract. Four sites were sampled in kelp (Macrocysiis pyrifera) forests occupying rocky bottom habitats along a wave exposure gradient in central California. Consistent betwecn-site differences were found in the three major structural elements - the surface canopy, the undcrstory assemblage, and the ground cover/turf assemblage - of kelp forest communities. Macrocysiis pyrifera was found at all four sites. Nereucyslis tuelkeana only at the most exposed site. The understory kelps Laminaria setchellii and Pterygopltora californica were also characteristic of exposed sites. Articulated coralline algae were more abundant at exposed sites than protected, while fleshy red algae showed the opposite pattern. All four study sites were located along 8.5 km of coastline, and thus were assumed to have available to them the same species pool for colonization. The substrate composition was the same and the amount of unconsolidated substrate was similar at all four sites. We suggest that exposure to wave-generated water motion, through its influence on the surface canopy and therefore on the amount of light reaching the bottom, is responsible for these between-site differences.     

User participation and fishery management performance within the pacific fishery management council

Fish populations have the potential to contribute to the long-term economic and social benefit of humans, but to do so they must be managed in ways which maintain ecological health. There are many ways that management performance can be assessed, but four measures are particularly pertinent to sustainability: equity, stewardship, regulatory resilience, and efficiency. A key factor in management performance is the process by which management tools are developed and implemented. One approach that has been recommended to improve performance is to structure the management process around user participation. The paper analyzes three case studies of user participation in ad hoc processes of Pacific groundfish management: the development of a license limitation program; an inter-gear sablefish allocation; and the development of a sablefish individual quota (IQ) program. The case studies illustrate the role played by participation in contributing to the equity, stewardship, resilience, and efficiency of the management process. The effect of user participation was mixed in the three cases, depending on the history of participation, the structure and process of participation, on resource conditions and on the characteristics of the program under consideration. Participation can contribute positively to fishery management performance when there is a history of collective decision-making, the time line is slow enough to allow a full consideration of the issues, educational possibilities are pursued and the condition of the resource allows equitable compromises.     

Projecting uncertainty onto marine megafauna trajectories

In this study, a method is proposed for estimating the uncertainty of a Lagrangian pathway calculated from an undersampled ocean surface velocity field. The primary motivation and application for this method is the differentiation between active and passive movements for sea turtles whose trajectories are observed with satellite telemetry. Synthetic trajectories are launched within a reconstructed surface velocity field and integrated forward in time to produce likely trajectories of an actual turtle or drifter. Uncertainties in both the initial conditions at launch and the velocity field along the trajectory are used to yield an envelope of possible synthetic trajectories for each actual trajectory. The juxtaposition of the actual trajectory with the resulting cloud of synthetic trajectories provides a means to distinguish between active and passive movements of the turtle. The uncertainty estimates provided by this model may lead to improvements in our understanding of where and when turtles are engaged in specific behaviors (i.e. migration vs. foraging)—for which potential management efforts may vary accordingly.     

Multi-decadal synthesis of benthic–pelagic coupling in the western arctic: Role of cross-shelf advective processes

Using geographic information systems (GIS) software and geostatistical techniques, we utilized three decades of water-column chlorophyll a data to examine the relative importance of autochthonous versus allochthonous sources of reduced carbon to benthic communities that occur from the northern Bering to the eastern Beaufort Sea shelf. Spatial trend analyses revealed areas of high benthic biomass (>300 g m⁻²) and chlorophyll (>150 mg m⁻²) on both the southern and northern Chukchi shelf; both areas are known as depositional centers for reduced organic matter that originates on the Bering Sea shelf and is advected northward in Anadyr and Bering shelf water masses. We found a significant correlation between biomass and chlorophyll a in the Chukchi Sea, reflective of the strong benthic–pelagic coupling in a system that is utilized heavily by benthic-feeding marine mammals. In contrast, there was no significant correlation between biomass and chlorophyll in the Beaufort Sea, which by comparison, is considerably less productive (biomass and chlorophyll, <75 g m⁻² and <50 mg m⁻², respectively). One notable exception is an area of relatively high biomass (50–100 g m⁻²) and chlorophyll (80 mg m⁻²) near Barter Island in the eastern Beaufort Sea. Compared to other adjacent areas in the Beaufort Sea, the chlorophyll values in the vicinity of Barter Island were considerably higher and likely reflect a long-hypothesized upwelling in that area and close coupling between the benthos and autochthonous production. In the Bering Sea, a drop in benthic biomass in 1994 compared with previous measurements (1974–1993) may support earlier observations that document a decline in biomass that began between the 1980s and 1990s in the Chirikov Basin and south of St. Lawrence Island. The results of this study indicate that the benthos is an excellent long-term indicator of both local and physical advective processes. In addition, this work provides further evidence that secondary production on arctic shelves can be significantly augmented by reduced carbon advected from highly productive adjacent shelves.     

The Oeschinensee rock avalanche,Bernese Alps,Switzerland: a co-seismic failure 2300 years ago?

Landslide deposits dam Lake Oeschinen (Oeschinensee), located above Kandersteg, Switzerland. However, past confusion differentiating deposits of multiple landslide events has confounded efforts to quantify the volume, age, and failure dynamics of the Oeschinensee rock avalanche. Here we combine field and remote mapping, topographic reconstruction, cosmogenic surface exposure dating, and numerical runout modeling to quantify salient parameters of the event. Differences in boulder lithology and deposit morphology reveal that the landslide body damming Oeschinensee consists of debris from both an older rock avalanche, possibly Kandertal, as well as the Oeschinensee rock avalanche. We distinguish a source volume for the Oeschinensee event of 37 Mm³, resulting in an estimated deposit volume of 46 Mm³, smaller than previous estimates that included portions of the Kandertal mass. Runout modeling revealed peak and average rock avalanche velocities of 65 and 45 m/s, respectively, and support a single-event failure scenario. ³⁶Cl surface exposure dating of deposited boulders indicates a mean age for the rock avalanche of 2.3 ± 0.2 kyr. This age coincides with the timing of a paleo-seismic event identified from lacustrine sediments in Swiss lakes, suggesting an earthquake trigger. Our results help clarify the hazard and geomorphic effects of rare, large rock avalanches in alpine settings.     

The role of granites in volcanic-hosted massive sulphide ore-forming systems: an assessment of magmatic�Chydrothermal contributions

Assessment of geological, geochemical and isotopic data indicates that a significant subgroup of volcanic-hosted massive sulphide (VHMS) deposits has a major or dominant magmatic?Chydrothermal source of ore fluids and metals. This group, which is typically characterised by high Cu and Au grades, includes deposits such as those in the Neoarchean Doyon-Bousquet-LaRonde and Cambrian Mount Lyell districts. These deposits are distinguished by aluminous advanced argillic alteration assemblages or metamorphosed equivalents intimately associated with ore zones. In many of these deposits, ??³⁴S_sulphide is low, with a major population below ?3??; ??³⁴S_sulphate differs from coexisting seawater and ??³⁴S_{sulphate?Csulphide}????20?C30??. These characteristics are interpreted as the consequence of disproportionation of magmatic SO₂ as magmatic?Chydrothermal fluids ascended and cooled and as a definitive evidence for a significant magmatic?Chydrothermal contribution. Other characteristics that we consider diagnostic of significant magmatic?Chydrothermal input into VHMS ore fluids include uniformly high (>3 times modern seawater values) salinities or very ¹⁸O-enriched (??¹⁸O?>?5??) ore fluids. We do not consider other criteria [e.g. variable salinity, moderately high ??¹⁸O_fluid (2?C5??), ??³⁴S_sulphide near 0??, metal assemblages or a spatial association with porphyry Cu or other clearly magmatic-hydrothermal deposits] that have been used previously to advocate significant magmatic?Chydrothermal contributions to be diagnostic as they can be produced by non-magmatic processes known to occur in VHMS mineral systems. However, in general, a small magmatic?Chydrothermal contribution cannot be excluded in most VHMS systems considered. Conclusive data that imply minimal magmatic?Chydrothermal contributions are only available in the Paleoarchean Panorama district where coeval seawater-dominated and magmatic?Chydrothermal systems appear to have been physically separated. This district, which is characterised by chloritic and sericitic alteration assemblages and lacks aluminous advanced argillic alteration assemblages, is typical of many VHMS deposits around the world, suggesting that for ??garden variety?? VHMS deposits, a significant magmatic?Chydrothermal contribution is not required. Other than deposits associated with advanced argillic alteration assemblages, the only deposit for which we ascribe a major magmatic?Chydrothermal contribution is the Devonian Neves Corvo deposit. This deposit differs from other deposits in the Iberian Pyrite Belt and around the world in being extremely Sn-rich, with the Sn closely associated with Cu and in having formed from high ¹⁸O-rich fluids (??¹⁸O_fluid ??8.5??). We consider these characteristics, particularly the last, as diagnostic of a significant magmatic hydrothermal contribution. Our analysis indicates that two subgroups of VHMS deposits have a major magmatic?Chydrothermal contribution: Cu/Au-rich deposits with aluminous alteration assemblages and reduced, very Sn-rich deposits in which Sn was introduced in a high-temperature ore assemblage. Comparison with ??normal?? VHMS deposits suggests that these subgroups of VHMS deposits may form in specialised tectonic environments. The Cu/Au-rich deposits appear to form adjacent to magmatic arcs, an environment conducive to the generation of hydrous, oxidised melts by melting metasomatised mantle in the wedge above the subducting slab. This contrasts with the back-arc setting of ??normal?? VHMS deposits in which relatively dry granites (In this contribution, we use the term granite sensu latto) formed by decompression melting drive seawater-dominated hydrothermal circulation. The tectonic setting of highly Sn-rich VHMS deposits such as Neves Corvo is less clear; however, thick continental crust below the ore-hosting basin may be critical, as it is in other Sn deposits.     

Controls on Fe reduction and mineral formation by a subsurface bacterium

The reductive dissolution of FeIII (hydr)oxides by dissimilatory iron-reducing bacteria (DIRB) could have a large impact on sediment genesis and Fe transport. If DIRB are able to reduce FeIII in minerals of high structural order to carry out anaerobic respiration, their range could encompass virtually every O₂-free environment containing FeIII and adequate conditions for cell growth. Previous studies have established that Shewanella putrefaciens CN32, a known DIRB, will reduce crystalline Fe oxides when initially grown at high densities in a nutrient-rich broth, conditions that poorly model the environments where CN32 is found. By contrast, we grew CN32 by batch culture solely in a minimal growth medium. The stringent conditions imposed by the growth method better represent the conditions that cells are likely to encounter in their natural habitat. Furthermore, the expression of reductases necessary to carry out dissimilatory Fe reduction depends on the method of growth. It was found that under anaerobic conditions CN32 reduced hydrous ferric oxide (HFO), a poorly crystalline FeIII mineral, and did not reduce suspensions containing 4 mM FeIII in the form of poorly ordered nanometer-sized goethite (α-FeOOH), well-ordered micron-sized goethite, or nanometer-sized hematite (α-Fe₂O₃) crystallites. Transmission electron microscopy (TEM) showed that all minerals but the micron-sized goethite attached extensively to the bacteria and appeared to penetrate the outer cellular membrane. In the treatment with HFO, new FeII and FeIII minerals formed during reduction of HFO-Fe in culture medium containing 4.0 mmol/L P_i (soluble inorganic P), as observed by TEM with energy-dispersive X-ray spectroscopy, selected area electron diffraction, and X-ray diffraction. The minerals included magnetite (Fe₃O₄), goethite, green rust, and vivianite [Fe₃(PO₄)₂ · 8H₂O]. Vivianite appeared to be the stable end product and the mean coherence length was influenced by the rate of FeIII reduction. When P_i was 0.4 mol/L under otherwise identical conditions, goethite was the only mineral observed to form, and less Fe²⁺ was produced overall. Hence, the ability of DIRB to reduce Fe (hydr)oxides may be limited when the bacteria are grown under nutrient-limited conditions, and the minerals that result depend on the vigor of FeIII reduction.     

From regolith to rock by shock

A model for shock-lithification of terrestrial and lunar regolith is proposed that accounts for: (1) observed petrographic properties and densities of shock-lithified material from missile impact craters at White Sands, New Mexico and from Meteor Crater, Arizona; (2) observed petrographic textures of lunar soil and lunar soil analogues experimentally shocked to known pressures in laboratory experiments; (3) theoretical calculations of the behavior of air and water under shock compression; and (4) measured Hugoniot and release adiabat data on dry and wet terrestrial soils and lunar regolith. In this model it is proposed that air or an air-water mixture initially in the pores of terrestrial soil affects the behavior of the soil-air-water system under shock-loading. Shock-lithified rocks found at Meteor Crater are classified as ‘strongly lithified’ and ‘weakly lithified’ on the basis of their strength in hand specimen; only weakly lithified rocks are found at the missile impact craters. These qualitative strength properties are related to the mechanisms of bonding in the rocks. The densities of weakly lithified samples are directly related to the pressures to which they were shock-loaded. A comparison of the petrographic textures and densities of weakly lithified samples with textures and densities of ‘regolith’ shock-loaded to known pressures suggests that weakly lithified terrestrial samples formed at pressures well under 100 kb, probably under 50 kb. If terrestrial soils are shock-loaded to pressures between 100 and 200 kb by impact events of short duration, the pore pressure due to hot air or air-water mixtures exceeds the strength of the weak lithification mechanisms and fragmentation, rather than lithification, occurs. At pressures above 200 kb, lithification can occur because the formation of glass provides a lithification mechanism which has sufficient strength to withstand the pore pressure. During shock-lithification of lunar regolith at pressures below 50 kb, the material is compressed to intrinsic crystal density and remains at approximately that density upon release from the shocked state. It is proposed, however, that at pressures in excess of 50 kb, the release of trapped volatiles from lunar soil grains into fractures causes an expansion of the regolith during unloading from the shocked state.