Invariants in toroidal and tangentially geostrophic frozen-flux velocity fields

We derive two new types of invariant that must be obeyed by the radial magnetic field at the core-mantle boundary if the hypothesis of frozen flux is valid and the fluid motion is either toroidal or tangentially geostrophic there. These general invariants incorporate specific invariants that are already known and can, in principle, be tested using magnetic data that cover an interval of time.     

Characterisation of brown coal humic acids and modified humic acids using pyrolysis gcms and other techniques

It has been proposed that Victorian brown coal can be considered as a two-component structure — a lignocellulosic “host”, containing various amounts of weakly bound or entrapped “guest” material together with very small amounts of inorganic and/or mineral matter. The latter predominantly consists of wax esters and/or terpenoid material. In this paper we describe attempts to gain structural information regarding the more complex, “host” component of the coal. Our initial model compound has been humic acid that can be readily obtained from the coal by alkaline extraction. It has been found that “pure” humic acid, free from material associated with the “guest” components of the coal, can be obtained by a highly selective, low-yielding alkaline extraction. This humic acid has been studied by nmr spectroscopy and pyrolysis gas chromatography-mass spectroscopy (py-gc/ms). The products arising from py-gc/ms have been compared with those obtained from similar pyrolysis of whole coals. Alkylation of humic acids using alkyl halides in the presence of base has been successfully carried out and reactivity of the resulting materials compared with those of the parent coal and humic acid.     

Mineral dissolution in the Cape Cod aquifer, Massachusetts, USA: I . Reaction stoichiometry and impact of accessory feldspar and glauconite on strontium isotopes, solute concentrations, and REY distribution

To compare relative reaction rates of mineral dissolution in a mineralogically simple groundwater aquifer, we studied the controls on solute concentrations, Sr isotopes, and rare earth element and yttrium (REY) systematics in the Cape Cod aquifer. This aquifer comprises mostly carbonate-free Pleistocene sediments that are about 90% quartz with minor K-feldspar, plagioclase, glauconite, and Fe-oxides. Silica concentrations and pH in the groundwater increase systematically with increasing depth, while Sr isotopic ratios decrease. No clear relationship between ⁸⁷Sr/⁸⁶Sr and Sr concentration is observed. At all depths, the ⁸⁷Sr/⁸⁶Sr ratio of the groundwater is considerably lower than the Sr isotopic ratio of the bulk sediment or its K-feldspar component, but similar to that of a plagioclase-rich accessory separate obtained from the sediment. The Si-⁸⁷Sr/⁸⁶Sr-depth relationships are consistent with dissolution of accessory plagioclase. In addition, solutes such as Sr, Ca, and particularly K show concentration spikes superimposed on their respective general trends. The K-Sr-⁸⁷Sr/⁸⁶Sr systematics suggests that accessory glauconite is another major solute source to Cape Cod groundwater. Although the authigenic glauconite in the Cape Cod sediment is rich in Rb, it is low in in-grown radiogenic ⁸⁷Sr because of its young Pleistocene age. The low ⁸⁷Sr/⁸⁶Sr ratios are consistent with equilibration of glauconite with seawater. The impact of glauconite is inferred to vary due to its variable abundance in the sediments. In the Cape Cod groundwater, the variation of REY concentrations with sampling depth resembles that of K and Rb, but differs from that of Ca and Sr. Shale-normalized REY patterns are light REY depleted, show negative Ce anomalies and super-chondritic Y/Ho ratios, but no Eu anomalies. REY input from feldspar, therefore, is insignificant compared to input from a K-Rb-bearing phase, inferred to be glauconite. These results emphasize that interpretation of groundwater chemistry, even in relatively simple aquifers, may be complicated by solute contributions from “exotic” accessory minerals such as glauconite. To detect such peculiarities, groundwater studies should combine the study of elemental concentration and isotopic composition of several solutes that show different geochemical behavior.     

Estimating severity of liquefaction-induced damage near foundation

An empirical procedure for estimating the severity of liquefaction-induced ground damage at or near foundations of existing buildings is established. The procedure is based on an examination of 30 case histories from recent earthquakes. The data for these case histories consist of observations of the damage that resulted from liquefaction, and the subsurface soil conditions as revealed by cone penetration tests. These field observations are used to classify these cases into one of three damaging effect categories, ‘no damage’, ‘minor to moderate damage’, and ‘major damage’. The potential for liquefaction-induced ground failure at each site is calculated and expressed as the probability of ground failure. The relationship between the probability of ground failure and the damage class is established, which allows for the evaluation of the severity of liquefaction-induced ground damage at or near foundations. The procedure presented herein represents a significant attempt to address the issue of liquefaction effect. Caution must be exercised, however, when using the proposed model and procedure for estimating liquefaction damage severity, because they are developed based on limited number of case histories.     

Frequency dependence of elastic wave speeds at high temperature: a direct experimental demonstration

At sufficiently high temperatures and/or long periods, the elastic behaviour of crystalline material gives way progressively to viscoelastic behaviour associated with the stress-induced migration of crystal defects. This transition is marked by the onset of appreciable strain energy dissipation accompanied by frequency dependence (dispersion) of the shear modulus and elastic wave speeds. Ultrasonic interferometry and torsional forced-oscillation techniques can be used to probe the low-amplitude stress-strain behaviour of fine-grained polycrystalline material in two very different frequency ranges, respectively 10-100 MHz and 1 mHz-1 Hz. Here we demonstrate and apply these two complementary methods in a study of the high-temperature mechanical behaviour of a fine-grained synthetic olivine polycrystal. At the high frequencies of ultrasonic interferometry, the shear wave speed varies linearly with temperature between room temperature and the highest experimentally accessible temperature (1300 °C) in close accord with expectations based on similarly high-frequency studies of the elastic behaviour of single-crystal olivine. However, at teleseismic frequencies (<1 Hz) and temperatures >900 °C, the shear wave speed becomes much more strongly temperature-sensitive reflecting markedly viscoelastic behaviour. Newly emerging laboratory-derived constraints on this viscoelastic enhancement of the temperature sensitivity of seismic wave speeds and its grain-size dependence will provide a more robust interpretation of seismological models for the variation of wave speeds and attenuation within the Earth's interior.     

Rock albedo and monitoring of thermal conditions in respect of weathering: some expected and some unexpected results

Broadly speaking, there is, at least within geomorphic circles, a general acceptance that rocks with low albedos will warm both faster and to higher temperatures than rocks with high albedos, reflectivity influencing radiative warming. Upon this foundation are built notions of weathering in respect of the resulting thermal differences, both at the grain scale and at the scale of rock masses. Here, a series of paving bricks painted in 20 per cent reflectivity intervals from black through to white were used to monitor albedo‐influenced temperatures at a site in northern Canada in an attempt to test this premise. Temperatures were collected, for five months, for the rock surface and the base of the rock, the blocks being set within a mass of local sediment. Resulting thermal data did indeed show that the dark bricks were warmer than the white but only when their temperatures were equal to or cooler than the air temperature. As brick temperature exceeded that of the air, so the dark and light bricks moved to parity; indeed, the white bricks frequently became warmer than the dark. It is argued that this ‘negating’ of the albedo influence on heating is a result of the necessity of the bricks, both white and black, to convect heat away to the surrounding cooler air; the darker brick, being hotter, initially convects faster than the white as a product of the temperature difference between the two media. Thus, where the bricks become significantly hotter than the air, they lose energy to that air and so their respective temperatures become closer, the albedo influence being superceded by the requirement to equilibrate with the surrounding air. It is argued that this finding will have importance to our understanding of weathering in general and to our perceptions of weathering differences between different lithologies. Copyright © 2005 John Wiley & Sons, Ltd.     

Production of a molybdophore during metal-targeted dissolution of silicates by soil bacteria

Although many bioessential metals are scarce in natural water and rock systems, microbial secretion of high-affinity ligands for metal extraction from solid phases has only been documented for Fe. However, we have discovered that Mo is extracted from a silicate by a high-affinity ligand (a possible “molybdophore”) secreted by an N₂-fixing soil bacterium. The putative molybdophore, aminochelin, is secreted as a siderophore under Fe-depleted conditions, but is also secreted under Fe-sufficient, Mo-depleted conditions. Presumably, molybdophore production facilitates uptake of Mo for use in Mo enzymes. In contrast, an Fe-requiring soil bacterium without a special Mo requirement only enhances the release of Fe from the silicate. Fractionation of Mo stable isotopes during uptake to cells may provide a “fingerprint” for the importance of chelating ligands in such systems. Many such metal-specific ligands secreted by prokaryotes for extraction of bioessential metals, their effects on Earth materials, and their possible utility in the recovery of economic metals remain to be discovered.