Landslide hazard mapping in the Constantine city,Northeast Algeria using frequency ratio,weighting factor,logistic regression,weights of evidence,and analytical hierarchy process methods

Landslides constitute the most widespread and damaging natural hazards in the Constantine city. They represent a significant constraint to development and urban planning. In order to reduce the risk related to potential landslide, there is a need to develop a comprehensive landslide hazard map (LHM) of the area for an efficient disaster management and for planning development activities. The purpose of this research is to prepare and compare the LHMs of the Constantine city, by applying frequency ratio (FR), weighting factor (Wf), logistic regression (LR), weights of evidence (WOE), and analytical hierarchy process (AHP) methods used in a framework of the geographical information system (GIS). Firstly, a landslide inventory map has been prepared based on the interpretation of aerial photographs, high resolution satellite images, fieldwork, and available literature. Secondly, eight landslide-conditioning factors such as lithology, slope, exposure, rainfall, land use, distance to drainage, distance to road, and distance to fault have been considered to establish LHMs using the FR, Wf, LR, WOE, and AHP models in GIS. For verification, the obtained LHMs have been validated comparing the LHMs with the known landslide locations using the receiver operating characteristics curves (ROC). The validated results indicate that the FR method provides more accurate prediction (86.59 %) of LHMs than the WOE (82.38 %), AHP (77.86 %), Wf (77.58 %), and LR (70.45 %) models. On the other hand, the obtained results showed that all the used models in this study provided a good accuracy in predicting landslide hazard in Constantine city. The established maps can be used as useful tools for risk prevention and land use planning in the Constantine region.     

Integrated geoelectrical resistivity and hydrogeochemical methods for delineating and mapping heavy metal zone in aquifer system

A novel study on using geoelectrical resistivity, soil property, and hydrogeochemical analysis methods for delineating and mapping of heavy metal in aquifer system is presented in this paper. A total of 47 surveys of geoelectrical resistivity with Wenner configuration were conducted to determine the subsurface and the groundwater characteristics. The groundwater sample from 53 existing wells and 2 new wells has been analyzed to derive their water chemical content. The chemical analysis was done on the soil sample obtained from new two wells and from selected locations. The water and soil chemical analysis results from the new two wells were used as calibration in resistivity interpretation. The occurrence of heavy metal in aquifer system was expected to detect using the geoelectrical resistivity survey for the whole study area. The result of groundwater analysis shows that the groundwater sample contains a relatively low concentration of Fe (<?0.3 mg/L) elongating from the south up to the middle region. While in the middle and the northwestern, Fe concentration is relatively high (around 12 mg/L). Chemical analysis of soil sample shows that in the lower resistivity zone (<?18 Ωm), Al and Fe concentrations are comparatively high with an average of 68,000 and 40,000 mg/kg, respectively. Starting from the middle to the northwestern zone, the resistivity value appears to be low. It is definitely caused by higher Al and Fe concentration within the soil, and it is supported also by lower total anion content in the groundwater. While the resistivity value of more than 40 Ωm in aquifers is obtained in the zone which Fe concentration is relatively lower in the soil but not present in the groundwater. Correlation Fe concentration in the soil and Fe concentration in the groundwater sample shows the trend of positively linear; however, the Al concentration in soil has no correlation with Al content in groundwater. Finally, the probability of high heavy metal zone in the aquifer system is easily delineated by the distribution of geoelectrical resistivity presented in depth slice shapes which extend from the Boundary Range Composite Batholith in the north to the northwest.     

Hydrothermal alteration and evolution of Zr-Th-U-REE mineralization in the microgranite of Wadi Ras Abda,North Eastern Desert,Egypt

Ras Abda plutonic suite, North Eastern Desert of Egypt, consists predominantly of Neoproterozoic calc-alkaline older granites. Minor exposures of pink microgranite are occurring along Wadi Ras Abda within the older granites. Previous studies on this area demonstrated that the microgranite is altered in some parts and contains anomalous concentrations of rare metal elements (Zr, Th, and U). These altered and mineralized zones are re-assessed using field observations, chemical analysis, and by the application of various transmitted light and electron microscopic techniques. The rare metals exist as mineral segregation grew freely into open cavities of the microgranite and concordant with the NNE strike-slip fault movement. The mineralized zones contain an assemblage of secondary magnetite, zircon, uranothorite, columbite-(Mn), fergusonite-(Y), and allanite-(Ce). The extreme abundance of zircon in the mineralized zone, along with other evidence, indicates a hydrothermal origin of this zircon together with associated rare metals. The geochemical investigation and mass balance calculations revealed extreme enrichment of Zr, Th, U, Y, Nb, Ta, and REE. Post-magmatic hydrothermal alterations resulted in such pronounced chemical and mineralogical heterogeneity. The hydrothermal fluids are thought to be oxidizing, alkaline and of medium temperature (>?250 °C). The average contents of the elements Zr (1606 ppm), Th (1639 ppm), U (306 ppm), Nb (955 ppm), and REE (1710 ppm) in the mineralized microgranite reach sub-economic levels and could be a potential source of these elements.     

Local site effect of a clay site in Shiraz based on seismic hazard of Shiraz Plain

Propagation of seismic waves through soil layers would drastically change the frequency content and amplitude-based features of ground motions at the surface. These alterations are known as seismic site effects. Computation of site effects of high-populated areas such as large cities is of great importance (e.g., it is used in development of seismic microzonation of a region). Shiraz is one of the most populous cities of Iran and is located in a high seismic hazardous region. A representative clay site in this city is selected to assess local site effects. The time series and random vibration theory procedure in the frequency domain are implemented to analyze the aforementioned site. Furthermore, the nonlinear dynamic soil behavior is simulated by the equivalent linear method and the nonlinear method via DEEPSOIL program. Three types of soil column uncertainties such as shear wave velocity, modulus reduction, and damping ratio of soil layers as well as depth of underlying rock half-space (D _bed) are considered herein. The mean amplification and standard deviation of natural logarithm of amplification factors are computed for a variety of analysis types. The results of the current study show that the computed mean and standard deviation of amplification factor in ln units by considering only V _S uncertainty are in good agreement with the corresponding ones by considering V _S and modulus reduction and damping ratio variabilities simultaneously for the studied site. Furthermore, it seems that the effect of bedrock depth in definition of spectral shapes of the Iranian seismic building code should be taken into account.     

The role of tourism in rural development: Evidence from Iran

GeoJournal - Tourism can play an important role in diversifying the rural economy and its expanding in rural areas contributes to the sustainability of the population and the economy of these areas...     

Seismic Behaviour of Excavations Reinforced with Soil–Nailing Method

Geotechnical and Geological Engineering - Soil nailing is an in-situ soil reinforcement technique that is used to enhance the stability of land slopes, retaining walls and excavations. This...     

Limitations of Monitoring Wells for the Detection and Quantification of Petroleum Products in Soils and Aquifers

Theoretical analysis and laboratory column experiments were carried out to investigate the conditions required for petroleum products (oil) to flow into a well installed through a sandy porous medium contaminated with the oil. The results indicated that oil would flow into a well only after a layer of "free oil" is formed in the adjacent porous medium. Because significant quantities of oil could be stored in the porous medium under the influence of capillary suction prior to the formation of the zone of free oil, the presence of oil in a well would indicate an advanced stage of oil contamination of the subsurface. While monitoring wells could be used to delineate the extent of the free-oil plume and the plume of dissolved petroleum constituents, they are not useful for delineating the extent of capillary held oil.
The experimental results also indicated that the ratio of the oil-layer thickness in the well to that in the porous medium is not a constant as is sometimes assumed in practice. Further, estimates of the oil thickness in the medium based on the oil thickness in wells and on capillary properties measured in the laboratory were sensitive to the values of the parameters used in these estimates. The measured thickness of the oil layer in a monitoring well alone may not yield reliable estimates of the amount of oil in the subsurface, and assuming that the oil-thickness ratio is a constant can lead to inadequate site assessments and inappropriate remedial plans.