Treatment of Hydrodynamic Loading for Random Sea State

- In order to employ cost effective frequency domain analysis for off-shore structures treatment of hydrodynamic loading is essential. Drag and inertia dominated, resonating and antiresonating cases under random sea states are analyzed to highlight the implications and relative merits of four salient linearization techniques.     

Instrumentation and Numerical Analysis of Cylindrical Diaphragm Wall Movement During Deep Excavation at Coastal Area

The lateral deflection of a cylindrical diaphragm wall and the associated ground movement induced by deep excavation are analyzed by performing site instrumentations and numerical analyses in the coastal area of Korea. Wall lateral deflection, rebar stress, and pore water pressure were measured and analyzed in eight directions. Variations of soil properties with the decrease of confining pressure are compared by performing various in situ tests before ad after excavation. To calculate the wall lateral deflection accurately, the effects of small strain nonlinearity, confining pressure, and the hysteresis loading/unloading loop developed during excavation are considered in the proposed numerical analysis. By comparing numerical results with measured ones, the importances of considering small strain nonlinearity and confining pressure reduction in the nonlinear (FEM) are emphasized. Also, the effects of wall stiffness on the performance of cylindrical diaphragm walls are studied for future similar excavation in the coastal area.     

Freshening of the Intermediate Waters in the Northern South China Sea over the PastSix Decades

The properties of salinity in the South China Sea (SCS), a significant marginal sea connecting the Pacific andIndian Oceans, are greatly influenced by the transport of fresh water flux between the two oceans. However, the long-termchanges in the intermediate water in the SCS have not been thoroughly studied due to limited data, particularly in relationto its thermodynamic variations. This study utilized reanalysis data products to identify a 60-year trend of freshening in theintermediate waters of the northern South China Sea (NSCS), accompanied by an expansion of low-salinity water. Thestudy also constructed salinity budget terms, including advection and entrainment processes, and conducted an analysis ofthe salinity budget to understand the impacts of external and internal dynamic processes on the freshening trend of theintermediate water in the NSCS. The analysis revealed that the freshening in the northwest Pacific Ocean and theintensification of intrusion through the Luzon Strait at intermediate levels are the primary drivers of the salinity changes inthe NSCS. Additionally, a weakened trend in the intensity of vertical entrainment also contributes to the freshening in theNSCS. This study offers new insights into the understanding of regional deep sea changes in response to variations in boththermodynamics and oceanic dynamic processes.     

频率域电磁法中视电阻率全区定义

视电阻率定义在电法勘探中得到广泛的应用。目前在频率域电磁法中常常采用远区视电阻率定义。由于在频率域中收发距并非足够大,以致在低频段远区定义视电阻率往往不能反映地下电阻率值。我们定义全区电阻率及引入校正系数K,经二层三层模型及野外实测资料的计算,证明了方法的有效性。     

准噶尔盆地中部III 区块原油中25-降藿烷分布特征与成因意义

通过对准噶尔盆地中部Ш区块原油或油砂抽提物的饱和烃气相色谱-质谱分析,研究了原油或油砂抽提物中25-降藿烷的分布规律.结果表明,不同井区或同一口井不同深度(层位)的原油25-降藿烷的相对含量存在比较明显的差别,表明其所遭受的生物降解程度有所差异,沿构造带从南到北,同一油层中原油的生物降解程度增强,比如位于构造北部(构造部位相对较高)的永1井、永3井侏罗系原油25-降藿烷丰度较高,表明生物降解比较明显,而位于南部(构造低部位)的永6井白垩系和侏罗系油层中的原油均无明显的生物降解现象;同一口井随深度增大生物降解作用将弱,如永2井浅部白垩系油层的原油降解较严重,而深部西山窑组的原油降解作用则不明显.根据原油生物降解的特征,结合车-莫古隆起调整对研究区油气成藏的影响,讨论了原油生物降解差异分布的成因机制.     

Origin of the hydrocarbon component of carbonaceous chondrites: the star-meteorite connection

We report the results of an experiment that produced a residue which closely matches the hydrocarbon component of the Murchison carbonaceous chondrite. This experiment suggests that the parent material of the meteoritic component originated as polycyclic aromatic hydrocarbon species in carbon stars during their later stages of evolution. The experiments also indicate that the pathway from those formation sites to eventual incorporation into the meteorite parent body involved hydrogenation in a plasma in the solar nebula or in H II regions prior to the solar nebula. This model is consistent with what is known about the meteoritic hydrocarbon component including deuterium abundance, the observation of cosmic infrared emission bands best attributed to polycyclic aromatic hydrocarbon molecules, and the inherent stability of these molecules that allows their formation in stars and subsequent survival in the interstellar medium.     

An examination of directional discontinuities and magnetic polarity changes around interplanetary sector boundaries usingE > 2 keV electrons

Past studies of interplanetary magnetic sector boundaries have been based on the assumption that one can determine the field polarities by comparing the field directions with those of the nominal Parker spiral angles. Previous investigators have found evidence for decreases of B, the magnitude of the magnetic fieldB, and increases of , the angle betweenB and the ecliptic plane, at sector boundaries. Others have argued that the characteristic thickness of sector boundaries exceeds that of tangential discontinuities, making sector boundaries a separate class of structures.We use a simple technique for inferring the polarities of interplanetary magnetic fields based on the assumption thatE > 2 keV electrons are always flowing along the magnetic field away from the Sun. Electron data from the UC Berkeley experiment on the ISEE-3 spacecraft are used to examine periods around several apparent sector boundaries in 1978 and 1979. We compare properties of (a) boundaries with field polarity changes and (b) large-angle ( > 60°) directional discontinuities with no field polarity changes. We find no significant differences between the sector boundaries and the directional discontinuities in terms of associated decreases in B or of values of . These results suggest no significant difference between sector boundaries and directional discontinuities other than the change in field polarities. Within limited statistics we find that about half the polarity changes would not have been identified using a requirement that > 90° and that half of the > 120° discontinuities would have been misidentified as polarity changes.     

Doppler velocity measurements made with a scanning photoelectric magnetograph

We discuss the problems connected with the measurements and evaluation of line-of-sight velocities, obtained with a scanning photoelectric magnetograph using a line-shifter with enhanced sensitivity. We bring arguments for the validity of the results of our photoelectric Doppler velocity recordings. We have found a network of cellularly shaped patterns in the distribution of photo-electrically measured line-of-sight motions, upflowing in the magnetically quiet (blue-shifted) and downflowing in magnetically active (red-shifted) areas of the photosphere, if the mean velocity level is estimated for a sufficiently large measured area. The features of both directions are mutually complementary. We demonstrate the effect of the shift of the reference zero velocity level on the topology of the line-of-sight velocity maps, and the dependence of this level on the size of the area from which it is estimated.     

Dynamical evolution of NEAs: Close encounters, secular perturbations and resonances

We discuss the main mechanisms affecting the dynamical evolution of Near-Earth Asteroids (NEAs) by analyzing the results of three numerical integrations over 1 Myr of the NEA (4179) Toutatis. In the first integration the only perturbing planet is the Earth. So the evolution is dominated by close encounters and looks like a random walk in semimajor axis and a correlated random walk in eccentricity, keeping almost constant the perihelion distance and the Tisserand invariant. In the second integration Jupiter and Saturn are present instead of the Earth, and the 3/1 (mean motion) and v ₆ (secular) resonances substantially change the eccentricity but not the semimajor axis. The third, most realistic, integration including all the three planets together shows a complex interplay of effects, with close encounters switching the orbit between different resonant states and no approximate conservation of the Tisserand invariant. This shows that simplified 3-body or 4-body models cannot be used to predict the typical evolution patterns and time scales of NEAs, and in particular that resonances provide some fast-track dynamical routes from low-eccentricity to very eccentric, planet-crossing orbits.On leave from the Department of Mathematics, University of Pisa, Via Buonarroti 2, 56127 Pisa, Italy, thanks to the G. Colombo fellowships of the European Space Agency.     

Some breakage characteristics of ultra-fine wet grinding with a centrifugal mill

A centrifugal mill is a high-power intensity media mill that can be used for ultra-fine grinding, employing centrifugal forces generated by gyration of the axis of the mill tube in a circle. The mill charge motion is quite different depending on the ratio of the gyration diameter to the mill diameter (G / D ratio), varying from a motion similar to that of a conventional tumbling media mill to that of a vibration mill. In this study, a centrifugal mill was constructed with an arrangement where the gyration diameter could be readily adjusted. The batch grinding characteristics of three different minerals (limestone, talc and illite) in water with dispersing agent were investigated at various G / D ratios. It was found that the optimum G / D ratio in terms of the specific energy consumption to give a desired fineness of product was different for the three minerals. This was due to their different reactions to the breakage mechanisms provided by the mill charge motion at varying G / D ratios. The size distributions became progressively narrower at increased grinding times, and particles finer than about 0.1 μm were not detected even for prolonged grinding times. Measurement of specific surface areas indicated that this was not due to an artifact of the size measurements by laser diffractometry. This implies that there is a limitation in which particles finer than 0.1 μm are not produced under the conditions tested in this type of mill, but further investigation is needed for experimental verification of this limit of comminution.