Monitoring of the nano-structure response of natural clay under mechanical perturbation using small angle X-ray scattering and digital image correlation

Acta Geotechnica - This paper introduces a new experimental method to monitor the evolving intra-particle, nanometre-scale response during hydro-mechanical tests on undisturbed wet clay samples...     

When hazard avoidance is not an option: lessons learned from monitoring the postdisaster Oso landslide,USA

On 22 March 2014, a massive, catastrophic landslide occurred near Oso, Washington, USA, sweeping more than 1 km across the adjacent valley flats and killing 43 people. For the following 5 weeks, hundreds of workers engaged in an exhaustive search, rescue, and recovery effort directly in the landslide runout path. These workers could not avoid the risks posed by additional large-scale slope collapses. In an effort to ensure worker safety, multiple agencies cooperated to swiftly deploy a monitoring and alerting system consisting of sensors, automated data processing and web-based display, along with defined communication protocols and clear calls to action for emergency management and search personnel. Guided by the principle that an accelerating landslide poses a greater threat than a steadily moving or stationary mass, the system was designed to detect ground motion and vibration using complementary monitoring techniques. Near real-time information was provided by continuous GPS, seismometers/geophones, and extensometers. This information was augmented by repeat-assessment techniques such as terrestrial and aerial laser scanning and time-lapse photography. Fortunately, no major additional landsliding occurred. However, we did detect small headscarp failures as well as slow movement of the remaining landslide mass with the monitoring system. This was an exceptional response situation and the lessons learned are applicable to other landslide disaster crises. They underscore the need for cogent landslide expertise and ready-to-deploy monitoring equipment, the value of using redundant monitoring techniques with distinct goals, the benefit of clearly defined communication protocols, and the importance of continued research into forecasting landslide behavior to allow timely warning.

     

Voracious planktonic hydroids: unexpected predatory impact on a coastal marine ecosystem

Hydroids are typically attached, benthic cnidarians that feed on a variety of small prey. During sampling on Georges Bank in spring 1994, we found huge numbers of hydroids suspended in the plankton. They fed on young stages of copepods that are an important prey for fish, as well as on young fish themselves. Two independent methods were used to estimate feeding rates of the hydroids; both indicate that the hydroids are capable of consuming from 50% to over 100% of the daily production of young copepods. These results suggest that hydroids can have a profound effect on the population dynamics of zooplankton and young fish on Georges Bank.     

Development of a benthic index to assess sediment quality in the Tampa Bay Estuary

The identification, remedial treatment, and monitoring of contaminated sediments are among the priorities for managers of the Tampa Bay Estuary. Tampa Bay, as an urbanized estuary, is subject to the input of watershed sources of chemical contaminants, including metals, pesticides, and organic chemicals. Although the use of biological indicators and their incorporation into multi-metric indices is not new, the refinement and applications of such techniques for determining environmental condition still require further development and exploration. We present a single Tampa Bay Benthic Index (TBBI) that was developed specifically for Tampa Bay. Stepwise discriminant analysis was applied to a comprehensive list of potential benthic metrics. Results from the stepwise procedure identified the metrics that best discriminated between "healthy" and "degraded" conditions, as defined by sediment contaminant effect levels and dissolved oxygen. Discriminant analysis was then applied to the resultant three variables to determine the linear combination for the index.     

The crater-facies kimberlite system of Tokapal, Bastar District, Chhattisgarh, India

Discovery of diamondiferous kimberlites in the Mainpur Kimberlite Field, Raipur District, Chhattisgarh in central India, encouraged investigation of similar bodies in other parts of the Bastar craton. The earlier known Tokapal ultramafic intrusive body, located beyond the 19-km milestone in Tokapal village along the Jagdalpur–Geedam road, was reinterpreted as crater-facies kimberlite. Its stratigraphic position in the Meso-Neoproterozoic intracratonic sedimentary Indravati basin makes it one of the oldest preserved crater-facies kimberlite systems. Ground and limited subsurface data (dug-, tube-wells and exploratory boreholes) have outlined an extensive surface area (>550 ha) of the kimberlite. The morphological and surface color features of this body on enhanced satellite images suggest that there is a central feeder surrounded by a collar and wide pyroclastic apron. Exploration drilling indicates that the central zone probably corresponds to a vent overlain by resedimented volcaniclastic (epiclastic) rocks that are surrounded by a 2-km-wide spread of pyroclastic rocks (lapilli tuff, tuff/ash beds and volcaniclastic breccia). Drill-holes also reveal that kimberlitic lapilli tuffs and tuffs are sandwiched between the Kanger and Jagdalpur Formations and also form sills within the sedimentary sequence of the Indravati basin. The lapilli tuffs are commonly well stratified and display slumping. Base surges and lava flows occur in the southern part of the Tokapal system. The geochemistry and petrology of the rock correspond to average Group I kimberlite with a moderate degree of contamination. However, the exposed rock is intensely weathered and altered with strong leaching of mobile elements (Ba, Rb, Sr). Layers of vesicular fine-grained glassy material represent kimberlitic lava flows. Tuffs containing juvenile lapilli with pseudomorphed olivine macrocrysts are set in a talc–serpentine–carbonate matrix with locally abundant spinel and sphene. Garnet has not been observed, and phlogopite is very rare. Very limited microdiamond testing (two 18-kg samples) proved negative; however, the composition of chromite grains indicate crystallization in the diamond stability field.     

Intracrystalline lipids within sulfates from the Haughton Impact Structure—Implications for survival of lipids on Mars

Lipids can be present within gypsum as intracrystalline inclusions if they become incorporated within the mineral as is it precipitates. The lipids that comprise these inclusions are protected against alteration or destruction by an external oxidising chemical environment because a protective mineral matrix surrounds them. Sulfate minerals are abundant on the surface of Mars and were present in the samples that were analysed by the Viking landers. The quantities of secondary intracrystalline fossil-lipids that are present in samples of gypsum and gypsum-rich soils from the Haughton Impact Structure, Devon Island, Canadian High Arctic are sufficient to suggest that if a similar concentration of fossil lipids was present in the sulfate-rich samples analysed by the Viking Landers then they could have been detected. Possible reasons why a secondary fossil-lipid signature was not detected include a poor rate of conversion during pyrolysis, exposure of intracrystalline lipids during periods of weathering to oxidative martian diagenesis, a low level of biological productivity or an absence of a source for lipids on the surface of Mars. Polycyclic aromatic hydrocarbons of meteoritic origin, and terpane biomarkers such as hopanes and steranes, are not present in the Haughton gypsum in sufficient quantities to have been readily detected.     

Time-lapse seismic analysis of pressure depletion in the Southern Gas Basin

In the Southern Gas Basin (SGB) of the North Sea there are many mature gas fields where time‐lapse monitoring could be very beneficial in extending production life. However, the conditions are not immediately attractive for time‐lapse seismic assessment. This is primarily because the main production effect to be assessed is a pore pressure reduction and frame stiffening because of gas production in tight sandstone reservoirs that also have no real seismic direct hydrocarbon indicators. Modelling, based on laboratory measurements, has shown that such an effect would be small and difficult to detect in seismic data. This paper makes two main contributions. Firstly, this is, to our knowledge, the first time‐lapse study in the SGB and involves a real‐data assessment of the viability for detecting production in such an environment. Secondly, the feasibility of using markedly different legacies of data in such a study is addressed, including an assessment of the factors influencing the crossmatching. From the latter, it is found that significant, spatially varying time shifts need to be, and are successfully, resolved through 3‐D warping. After the warping, the primary factors limiting the crossmatching appear to be residual local phase variations, possibly induced by the differing migration strategies, structure, reverberations and different coherencies of the volumes, caused by differences in acquisition‐structure azimuth and acquisition fold. Despite these differences, a time‐lapse amplitude signature is observed that is attributable to production. The character of the 4‐D amplitude anomalies may also indicate variations in stress sensitivity, e.g. because of zones of fracturing. Additionally, warping‐derived time attributes have been highlighted as a potential additional avenue for detection of pressure depletion in such reservoirs. Although the effects are subtle, they may indicate changes in stress/pressure in and around the reservoir because of production. However, to fully resolve the subtle time‐lapse effects in such a reservoir, the data differences need to be better addressed, which may be possible by full re‐processing and pre‐stack analysis, but more likely dedicated 4‐D acquisition would be required.     

Evaluating Lost Person Behavior Models

US wilderness search and rescue consumes thousands of person‐hours and millions of dollars annually. Timeliness is critical: the probability of success decreases substantially after 24 hours. Although over 90% of searches are quickly resolved by standard “reflex” tasks, the remainder require and reward intensive planning. Planning begins with a probability map showing where the lost person is likely to be found. The MapScore project described here provides a way to evaluate probability maps using actual historical searches. In this work we generated probability maps the Euclidean distance tables in (Koester 2008 ), and using Doke's ( 2012 ) watershed model. Watershed boundaries follow high terrain and may better reflect actual barriers to travel. We also created a third model using the joint distribution using Euclidean and watershed features. On a metric where random maps score 0 and perfect maps score 1, the Euclidean distance model scored 0.78 (95%CI: 0.74–0.82, on 376 cases). The simple watershed model by itself was clearly inferior at 0.61, but the Combined model was slightly better at 0.81 (95%CI: 0.77–0.84).