Submillimetre imaging of NGC 3079

Submillimetre mapping observations of the active edge-on spiral galaxy NGC 3079 are presented. These maps at 850 and 450 μm were made with the Submillimetre Common User Bolometer Array (SCUBA) at the James Clerk Maxwell Telescope (JCMT).
The source structure at these wavelengths consists of a central unresolved source embedded in diffuse disc emission, similar to that displayed at 1.2 mm. The disc emission is fitted with two optically thin, isothermal dust models which give temperatures of 12 and 31 K, similar to those derived previously by Braine et al. The core component is well described by a single-temperature fit (∼32 K). The combined dust mass from these observations, using the same mass absorption coefficient as Devereux & Young (1990) is 3.5×10⁸ M_⊙, of which ∼90 per cent resides in the cold component of the galactic disc. The effect of the cold dust component detected by SCUBA is thus to reduce the global gas-to-dust mass ratio from ∼1400 found in the above study to 85, very similar to the Galactic level. Calculations using the models of Draine & Lee and/or alternative molecular gas mass estimates yield gas-to-dust mass ratios in the range 60–190.
The data presented here, together with previously published 1.2-mm mapping observations and IRAS data, are inconsistent with detections made with the Infrared Space Observatory ( ISO ). In particular, the latter give an excess of flux at 200 and 180 μm relative to that predicted by our simple model fits (approximately a factor of 2–3).     

ASCA spectroscopy of the hard X-ray emission from the colliding wind interaction in γ2 Velorum

We discuss an ASCA observation of the eccentric WC8+O7.5 III binary γ ² Velorum near apastron. The X-ray spectrum is compared with two previous observations obtained when the system was near periastron. All three spectra display a hard-emission component that undergoes strong variability over the orbital cycle. The properties of the hard X-ray emission of γ ² Vel are constrained by taking into account the contribution from contaminating soft X-ray sources in the vicinity of γ ² Vel. We find that the observed variations are in qualitative agreement with the predictions of colliding wind models. We investigate for the first time the effect of uncertainties in the chemical composition of the X-ray emitting plasma on our understanding of the high-energy properties of the wind interaction region. Our results indicate that these uncertainties significantly affect the derived shock temperature and absorption column, but play a smaller role in determining the intrinsic X-ray luminosity of the colliding wind zone. We further find that the intrinsic luminosity from the hard X-ray component in γ ² Vel does not follow the 1/ D distance relation expected from simple models of adiabatic shocks.     

Fluorescence spectral analysis of resinite macerals from coals of the Hanna Formation, Wyoming, U.S.A.

Flourescence spectral analysis indicates that resinite macerals from Tertiary Hanna Formation coals (Hanna Coal Field, southcentral Wyoming, U.S.A.) can be separated into five distinct groups. The first resinite group fluoresces a a medium green (in blue light); its average spectral maximum occurs at or below 440 mm with a red/green quotient of 0.22. The second resinite group fluoresces yellow-green with an average spectral maximum of 500 nm and a red/green quotient of 0.53. The third resinite group displays a yellow fluorescence having an average spectral maximum of 580 nm and a red/green quotient of 0.86. The fourth resinite group fluorescence orange-brown having an average spectral maximum of 610 nm and a red/green quotient of 1.20. These four groups mostly occur as primary globular resinites exhibiting scratches and fractures, indicating that they are brittle, solid substances. Primary cell-filling and secondary fracture-filling resinites also occur in these four groups. The fifth group only occurs as a secondary void-filling material and lacks evidence of br of brittle properties. It fluoresces a reddish-brown, has a spectral maximum at 690 nm, and a red/green quotient of 1.54. The fifth group has properties resembling exsudatinite. The five resinite groups can be separated on the basis of their nine spectral properties alone, without qualitative petrographic interpretation.The relative quantities of the five resinite groups vary among Hanna Formation coals. The origins of these five resinite groups are probably related to their botanical properties and pre- and post-depossitional conditions. Overall, Hanna Formation resinites have petrographic characteristics similar to other North American resinites; however, only four resinite groups have been distinguished in in certain coals from Utah and New Mexico (U.S.A.), and western Canada.     

一个三维水动力学模型及其在水环境中的适用性试验

发展了一个三维水动力学模型.该模型在水底磨擦项计算中,采用了流速的平方根法;在湍流扩散系数的估算中,采用了带稳定度函数的参数化方案;对垂直方向上的坐标进行了压缩,引入σ坐标;对时间变量则采用了分离模式技术,即外部模式(快过程)与内部模式(慢过程);而求解外部模式时,采用了显式一隐式格式交错法(ADI),从而使模型不仅计算时间缩短,且可应用于水很深而水平空间尺度很小,又有热力分层的水域中.最后作为该模型的一个实用性试验,选择了美国犹他州East Canyon水库,利用该模型探讨了温跃层对风、人流及出流变化的响应情况.     

A Study of the Impacts of Freeze–Thaw on Cliff Recession at the Calvert Cliffs in Calvert County,Maryland

The Calvert Cliffs, which form much of the western coastline of the Chesapeake Bay in Calvert County, Maryland, are actively eroding and destabilizing, yielding critical situations for many homes in close proximity to the slope’s crest. Past studies have identified that waves directly interacting with the slope toe control cliff recession; however, where waves do not regularly interact with the slope toe, freeze–thaw controls recession. This study investigated the validity of this second claim by analyzing the recession rate and freeze–thaw behavior of six study sites along the Calvert Cliffs that are not directly affected by waves. While waves do remove failed material from the toe in these regions, freeze–thaw is believed to be the dominant factor driving recession at these sites. Past recession rates were calculated using historical aerial photographs and were analyzed together with a number of other variables selected to represent the freeze–thaw behavior of the Calvert Cliffs. The investigation studied sixteen independent variables and found that over 65 % of recession at these study sites can be represented by freeze–thaw through the following variables: (1) slope aspect, (2) soil freeze–thaw susceptibility, (3) the number of freeze–thaw cycles, and (4) the weighted shear strength. Future mitigation techniques at these sites should focus on addressing these variables. Unmitigated, the Calvert Cliffs will continue to recede until a stable slope angle is reached and maintained.     

Countergradient Fluxes of Conserved Variables in the Clear convective and Stratocumulus-topped Boundary Layer: The role of the Entrainment Flux

Large-eddy simulations of a clear convective boundary layer (CBL)and a stratocumulus-topped boundary layer are studied. Bottom-upand a top-down scalars were included in the simulations, and theprinciple of linear superposition of variables was applied toreconstruct the fields of any arbitrary conserved variable.This approach allows a systematic analysis of countergradient fluxesas a function of the flux ratio, which is defined as the ratio betweenthe entrainment flux and the surface flux of the conserved quantity.In general, the turbulent flux of an arbitrary conserved quantityis counter to the mean vertical gradient if the heights where thevertical flux and the mean vertical gradient change sign do notcoincide. The regime where the flux is countergradient is thereforebounded by the so-called zero-flux and zero-gradient heights. Becausethe vertical flux changes sign only if the entrainment flux has anopposite sign to the surface flux, countergradient fluxes arepredominantly found for negative flux ratios. In the CBL the fluxratio for the virtual potential temperature is, to a good approximation,constant, and equal to -0.2. Only if the moisture contribution to thevirtual potential temperature is negligibly small will the flux ratio forthe potential temperature be equal to this value. Otherwise, theflux ratio for the potential temperature can have any arbitrary(negative) value, and, as a consequence, the fluxes for thepotential temperature and the virtual potential temperature willbe countergradient at different heights. As a practical application ofthe results, vertical profiles of the countergradient correction termfor different entrainment-to-surface-flux ratios are discussed.     

Improving Large Area Population Mapping Using Geotweet Densities

Many different methods are used to disaggregate census data and predict population densities to construct finer scale, gridded population data sets. These methods often involve a range of high resolution geospatial covariate datasets on aspects such as urban areas, infrastructure, land cover and topography; such covariates, however, are not directly indicative of the presence of people. Here we tested the potential of geo‐located tweets from the social media application, Twitter, as a covariate in the production of population maps. The density of geo‐located tweets in 1x1 km grid cells over a 2‐month period across Indonesia, a country with one of the highest Twitter usage rates in the world, was input as a covariate into a previously published random forests‐based census disaggregation method. Comparison of internal measures of accuracy and external assessments between models built with and without the geotweets showed that increases in population mapping accuracy could be obtained using the geotweet densities as a covariate layer. The work highlights the potential for such social media‐derived data in improving our understanding of population distributions and offers promise for more dynamic mapping with such data being continually produced and freely available.     

Melt production during granulite-facies anatexis: experimental data from “primitive” metasedimentary protoliths

We conducted fluid-absent partial melting experiments, at 0.5 and 1.0?GPa in the temperature range 750 to 1000?°C, to investigate the influence of bulk rock Mg ? [100Mg/(Mg+Fe)] and the effects of additional TiO₂ on the granulite-grade anatectic evolution of relatively magnesian metapelites and metagreywackes. In these experiments, melting began between 780 and 830?°C by the incongruent breakdown of biotite to produce quartz-saturated, granulite-facies residual mineral assemblages in equilibrium with H₂O-undersaturated granitic melt. The glass (quenched melt) compositions produced in this study vary little. Generally, the glasses have compositions similar to those of many natural strongly peraluminous leucogranites. The solidus temperatures in both rock types increase with increasing Mg ?, but are unaffected by the presence or absence of a TiO₂ component. At 0.5?GPa the metapelites melted at temperatures up to 50?°C lower than the equivalent metagreywackes, but at 1?GPa there was no discernible difference. This study suggests that the fluid-absent solidus has a steep positive dP/dT slope in metapelites and steep negative dP/dT slope in metagreywackes. The pattern of melt production with increasing temperature is strongly controlled by the upper limit of biotite stability. In TiO₂-free compositions this was found to increase by 15 to 20?°C in the metapelites and by 30 to 40?°C in the metagreywackes, as a function of increasing Mg ? from 49 to 81. The presence of a TiO₂ component increases the upper limit of biotite stability by ～50?°C in the metapelites and by ～80?°C in the metagreywackes, over that observed in the equivalent TiO₂-free compositions. In consequence, in the TiO₂-free samples large pulses of melt (up to 35 wt%) are produced over narrow temperature ranges (as little as 15?°C in these experiments) between 830 and 875?°C. In the TiO₂-bearing samples the major pulse of melt production occurs more gradually between 830 and >900?°C.