Assessment of seismic design response factors of air traffic control towers

Air Traffic Control (ATC) towers are among the most vital structures in each airport. Due to inadequate information regarding the seismic design and assessment of these types of structures, practicing engineers may refer to building codes. However, taking into account the special dynamic behavior of ATC towers, instructions and recommendations provided in building codes often do not comply with the required seismic performance levels of ATC towers. In this study, seismic behaviors of three in-service ATC towers with a dual concrete core lateral load resisting system were studied through pushover and incremental dynamic collapse analysis. Seismic design response factors of the reference towers were calculated. It was found that seismic design response factors adopted by the design code did not provide a uniform safety margin for all reference ATC towers. It was also observed that shorter towers have significantly higher response modification factors compared to taller towers. For the studied towers, a structural over-strength factor of 2.4 and a displacement amplification factor of 4 were obtained.     

Learning about Feminism in Digital Spaces: online methodologies and participatory mapping

Collaborative online research offers opportunities and constraints for geographers. This article critically appraises a collaborative research process that we used to illuminate spatial and political dynamics of feminism contained within the online group ‘Destroy the Joint’ (DTJ). A mostly Australian initiative of over 74 000 Facebook members, DTJ aims to end sexism and misogyny in multiple ways. It operates as a meeting place, discussion forum, and umbrella organisation for numerous micro-campaigns that change in response to broader social, cultural and political contexts, and occur in online and offline spaces. We formed a collaborative research agreement with the moderators of DTJ to reflect on its work, asking participants to put themselves on a map and complete a survey. Participatory GIS and survey-based research operated in the real and the more-than-real spaces that contain paradoxical possibilities. We use the term more-than-real to highlight the excesses of digital spaces: the affect that social media generates, and is generated by, characterises the more-than-real, where extremes in productive and corrosive relations can permeate. Survey results showed diverse appreciations of DTJ's multiple activist tactics (across seemingly ‘superficial’ and ‘meaningful’ interventions), and creative ideas for future campaigns. Mapping revealed both dispersed networks and urban activist concentrations. Nevertheless, after an initial peak of interest and enthusiasm for reflecting on DTJ, the reporting back of research findings to DTJ followers did not garner significant interest. This article tracks that collaborative research trajectory. Intentions to build a hybrid research collective were not realised because of how the more-than-real affords possibilities and limitations. The politics of ‘giving-back’ within the more-than-real are critically engaged with in this appraisal of an experimental online collaboration.     

Vertical Discretization Impact in Numerical Modeling of Matrix Diffusion in Contaminated Groundwater

Understanding the effects of contaminants that can diffuse into low-permeability (“low-k”) zones is crucial for effective groundwater remedial decision-making. Because low-k zones can serve as low-level sources of contamination to more transmissive zones over time, an accurate evaluation of the impacts of matrix diffusion at contaminated sites is vital. This study compared numerical groundwater flow and transport simulations using MODFLOW/RT3D at a hypothetical site using three cases, each with increasing discretization of the vertical 10-m thick domain: (1) a coarse multilayer heterogeneous grid based on one layer for each of four different hydrogeological units, (2) a “low-resolution” discretization approach where the low-k units were divided into several sublayers giving the model 10 layers, and (3) a “high-resolution” numerical model with 199 layers that are a few centimeters thick. When comparing the results of each case, significant differences were observed between the discretizations used, even though all other model input data were identical. The conventional grid models (Cases 1 and 2) appeared to underestimate groundwater plume concentrations by a factor ranging from 1.1 to 36 when compared to the high-resolution grid model (Case 3), and underestimated predicted cleanup times by more than a factor of 10 for some of the hypothetical sampling points in the modeling domain. These results validate the implication of Chapman et al. (2012), that conventional vertical discretization of numerical groundwater flow and transport models at contaminated sites (with layers that are greater than 1 m thick) can lead to significant errors when compared to more accurate high-resolution vertical discretization schemes (layers that are centimeters thick).     

On the Influence of Sea Surface Height Variability on Satellite Altimeter Derived Gravity

The effect of sea surface height (SSH) variability is one of the primary factors that limit the accuracy and resolution of altimeter-derived gravity values. We propose a method to estimate the influence of variation of the sea surface height on the accuracy of satellite-derived gravity by simulation technique, with a case study around Indonesian waters. Wederived an Indonesian marine gravity map using the Geosat-geodetic mission (GM). Since most of the area studied is located around coastal and shallow areas, the measurement of SSH of this area is less accurate. To obtain a distribution of SSH variability over the study area, Topex/Poseidon (T/P) data were first processed and assessed. Processing 52 cycles of the Topex/Poseidon data, the root mean square (RMS) of SSH variability for each cycle was found to vary from 1 to 179 cm. Further, for the purpose of estimating the accuracy of altimeter-derived gravity, we derived several levels of Gaussian noise, computed simulation data by adding the Gaussian noise to Geosat data, and determined simulated gravity maps. Based on the distribution of RMS values from T/P data and standard deviation (STD) differences between the simulated and the original gravity maps, we estimated the accuracy of the gravity map. Around Indonesian waters, the accuracy of the gravity map influenced by SSH variation was estimated to be within the range 0.8~93 mgal.     

Wave dispersion in dry granular materials by the distinct element method

Numerical studies are conducted to investigate the existence of wave dispersion in resonant column tests on dry granular soil. To this end, the two-dimensional distinct element method (DEM) in the time domain is employed. The investigations focus on the effect of sample width, voids ratio, viscous damping and wavelength, on propagation velocities of longitudinal harmonic waves in rectangular samples of uniform grains. It is shown that granular materials may exhibit anomalous dispersion that is, wave velocities that increase with increasing excitation frequency. This increase may exceed 20% for squatty samples, but becomes less pronounced for slender samples. Similar findings have been reported in some experiments on granular materials, but have not been systematically explored by numerical means. Results are presented in the form of dimensionless graphs and charts that elucidate the salient features of the problem. Comparisons with findings from gradient elastodynamic and viscoelastic theories are discussed.     

Large and growing environmental reservoirs of Deca-BDE present an emerging health risk for fish and marine mammals

Polybrominated diphenyl ethers (PBDEs) have been the subject of intense scientific and regulatory scrutiny during recent years. Of the three commercial forms (Penta, Octa and Deca) of PBDEs that have been widely used as flame retardants in textiles, furniture upholstery, plastics, and electronics, only Deca-BDE remains on the general market in North America, while a recent ruling of the European Court spells an impending end to its use in Europe. We review here highlights of aquatic research documenting the rapid emergence of PBDEs as a high priority environmental concern in Canada. PBDEs are being introduced in large quantities to the aquatic environment through sewage discharge and atmospheric deposition. In certain environmental compartments, the single congener BDE-209, the main ingredient in the Deca-BDE formulation, has surpassed the legacy PCBs and DDT as the top contaminant by concentration. Limited biomagnification of BDE-209 in aquatic food webs reflects its high log K_ow and preferential partitioning into the particle phase. As a result, large environmental reservoirs of BDE-209 are being created in sediments, and these may present a long-term threat to biota: BDE-209 breaks down into more persistent, more bioaccumulative, more toxic, and more mobile PBDE congeners in the environment.     

Uncertainty in Carbon Capture and Storage (CCS) deployment projections: a cross-model comparison exercise

Carbon Capture and Storage (CCS) can be a valuable CO₂ mitigation option, but what role CCS will play in the future is uncertain. In this paper we analyze the results of different integrated assessment models (IAMs) taking part in the 27th round of the Energy Modeling Forum (EMF) with respect to the role of CCS in long term mitigation scenarios. Specifically we look into the use of CCS as a function of time, mitigation targets, availability of renewables and its use with different fuels. Furthermore, we explore the possibility to relate model results to general and CCS specific model assumptions. The results show a wide range of cumulative capture in the 2010–2100 period (600–3050 GtCO₂), but the fact that no model projects less than 600 GtCO₂ indicates that CCS is considered to be important by all these models. Interestingly, CCS storage rates are often projected to be still increasing in the second half of this century. Depending on the scenario, at least six out of eight, up to all models show higher storage rates in 2100 than in 2050. CCS shares in cumulative primary energy use are in most models increasing with the stringency of the target or under conservative availability of renewables. The strong variations of CCS deployment projection rates could not be related to the reported differences in the assumptions of the models by means of a cross-model comparison in this sample.     

Experimental Study on the Wake Meandering Within a Scale Model Wind Farm Subject to a Wind-Tunnel Flow Simulating an Atmospheric Boundary Layer

The phenomenon of meandering of the wind-turbine wake comprises the motion of the wake as a whole in both horizontal and vertical directions as it is advected downstream. The oscillatory motion of the wake is a crucial factor in wind farms, because it increases the fatigue loads, and, in particular, the yaw loads on downstream turbines. To address this phenomenon, experimental investigations are carried out in a wind-tunnel flow simulating an atmospheric boundary layer with the Coriolis effect neglected. A \(3 \times 3\) scaled wind farm composed of three-bladed rotating wind-turbine models is subject to a neutral boundary layer over a slightly-rough surface, i.e. corresponding to offshore conditions. Particle-image-velocimetry measurements are performed in a horizontal plane at hub height in the wakes of the three wind turbines occupying the wind-farm centreline. These measurements allow determination of the wake centrelines, with spectral analysis indicating the characteristic wavelength of the wake-meandering phenomenon. In addition, measurements with hot-wire anemometry are performed along a vertical line in the wakes of the same wind turbines, with both techniques revealing the presence of wake meandering behind all three turbines. The spectral analysis performed with the spatial and temporal signals obtained from these two measurement techniques indicates a Strouhal number of \(\approx 0.20 - 0.22\) based on the characteristic wake-meandering frequency, the rotor diameter and the flow speed at hub height.     

Cultural sediment analyses and transitions in early fishing activity at Langenesværet,Vesterålen,Northern Norway

The development of specialized and commercial fishing activity in the island archipelago of Lofoten and Vesterålen in northern Norway is a critical foundation from which to understand the subsequent spread of commercial fishing across the north Atlantic region during the medieval and early modern period. One little understood aspect of this development is the relationship between medieval commercial fishing stations (fiskevaer) and earlier fishing activity. In this article, cultural sediment deposits at Langenesværet, Vesterålen, Northern Norway provide an opportunity to examine this relationship and its implications for current historical models of fishing development in northern Norway and the north Atlantic region. Conventional and AMS radiocarbon dating techniques are used to establish a chronology for the deposits, while activities associated with the sediments are characterized using thin‐section micromorphology supported by proton induced X‐ray emission spectrometry (PIXE). The results suggest that the site commenced formation as early as ca. 3000 B.C. and that the site was first used for specialized fishing activity from the early centuries A.D. The medieval commercial fiskevaer settlement at Langenesværet was introduced to an area that had a longstanding tradition of specialised fishing activity. © 2000 John Wiley & Sons, Inc.