Stochastic subspace identification for output‐only modal analysis: application to super high‐rise tower under abnormal loading condition

The objective of this paper is to develop an online system parameter estimation technique from the response measurements through using the recursive covariance‐driven stochastic subspace identification (SSI‐COV) approach. In developing the recursive SSI‐COV, to avoid time‐consumption of singular value decomposition in recursive SSI, the extended instrumental variable version of the projection approximation subspace tracking method is used in SSI‐COV. Besides, to reduce the effect of noise on the results of identification, the preprocessing of data using recursive singular spectrum analysis technique is also presented to remove the noise contaminant measurements to enhance the stability of data analysis. On the basis of the proposed method, both the ambient vibration and seismic response data of a tower (Canton Tower) are used to observe the time‐varying system natural frequencies of a tower from its operating condition. Results from using off‐line SSI‐COV method under normal operating condition are also presented. Comparison on the identified time‐varying dynamic characteristics of the tower under normal operating condition and earthquake response of distanced earthquake event is discussed. Copyright © 2012 John Wiley & Sons, Ltd.     

A frequency response function change method for damage localization and quantification in a shear building under ground excitation

A frequency response function change (FRFC) method to detect damage location and extent based on the change in the frequency response functions of a shear building under the effects of ground excitation was proposed in this paper. The damage identification equation was derived from the motion equations of the system before and after the occurrence of the damage. Efforts to make the FRFC method less model‐dependent were made. Intact system matrices, which could be estimated using the measured data without the need for an analytical model, and the frequency response functions were required for the FRFC method. The effects of measurement noise and model parameter error in the FRFC method were studied numerically. The proposed FRFC method was validated by experimental studies of a six‐story steel building structure with single and multiple damage cases. Copyright © 2012 John Wiley & Sons, Ltd.     

Application of singular spectrum analysis to identify the degrading structure using deteriorating distributed element model

Reinforced concrete structure may exhibit significant inelastic hysteretic behavior when subject to strong earthquake excitation. To investigate such an inelastic behavior, in this study, a new system identification technique is applied by using the deteriorating distributed element (DDE) model to simulate the hysteretic behavior of a degrading structure. Through the advanced signal processing technique, the multiple singular spectrum analysis (SSA) and the nonlinear SSA, the recorded inelastic restoring force of a deteriorating structure can be decomposed into several independent additive components in its sequentially degrading order and with decreasing weight. With each decomposed hysteresis loop, the model parameters of the DDE model are identified. The evolutionary properties of the progressive stiffness degradation behavior of reinforced concrete structure can be observed from the identified model parameters. Finally, comparison on the physical properties of the identified DDE model with respect to the seismic response data of the deteriorating structure is also discussed. The result shows that the proposed identification technique can have a good estimation on the seismic behavior of the degrading structure. Copyright © 2012 John Wiley & Sons, Ltd.     

Sensitivity of Typhoon Vamei (2001) Simulation to Planetary Boundary Layer Parameterization Using PSU/NCAR MM5

This paper investigates the sensitivity of the numerical simulations of a near equatorial Typhoon Vamei (2001) to various planetary boundary layer (PBL) parameterization schemes in the Pennsylvania State University (PSU)/National Centre for Atmospheric Research (NCAR) non-hydrostatic mesoscale model (MM5). The numerical simulations are conducted on two domains at 45 and 15 km grids nested in a one-way fashion. Four different PBL parameterization schemes including the Blackadar (BLK) scheme, the Burk–Thompson (BURKT) scheme, the NCEP Eta model scheme and the NCEP medium range forecast (MRF) model scheme are investigated. Results indicate that the intensity and propagation track of the simulated near equatorial typhoon system is not very sensitive to the different PBL treatments. The simulated minimum central pressures and the maximum surface wind speeds differ by only 5–6 hPa and 6–8 ms⁻¹, respectively. Larger variations between the simulations occur during the weakening phase of the typhoon system. While all schemes simulated the typhoon with reasonable accuracy, the ETA scheme produces the strongest storm intensity with the largest heat exchanges over the marine environment and the highest warm moisture air content in the PBL around the core of the storm.     

Seasonal circulations in the Malay Peninsula Eastern continental shelf from a wave–tide–circulation coupled model

A wave–tide–circulation coupled model based on Princeton Ocean Model is established to study the seasonal circulation in the Malay Peninsula Eastern Continental Shelf region. The model successfully reconstructs the observed seasonal variation of the circulation in the region, as well as the main currents. The simulated tidal harmonic constants, sea surface temperature, and sea surface height anomaly agree with the observations well. The model results show that the upper-layer circulation in the region is mainly controlled by the monsoon winds, while there are two transitions in spring and fall. An anti-cyclonic eddy is present off the Peninsular Malaysia’s east coast in summer, centered at 5°N and 105.5°E, both in the TOPEX/Poseidon data and in the model. Numerical experiments show that the wind stress curl and bathymetry steering are responsible for its formation.     

Evidence for significant clockwise rotations of the Korean Peninsula during Cretaceous

In an effort to evaluate the Cretaceous magnetostratigraphy for the Korean Peninsula and to establish the tectonic coherence of its various elements, we collected paleomagnetic data from 121 samples from 20 sites within the Chilgok Formation (108.3–109.9 Ma) in the Gyeongsang Basin. Together with previously published data, we evaluate the results from a total of 163 sites in the basin.We combine our age model with results from recent stratigraphic, paleomagnetic and radiometric geochemical studies. In this study, we found that two distinct declination shifts decrease with younging direction, indicating two clockwise rotational events of the Korean Peninsula with respect to the Eurasia continent. The earlier event took place during 130–100 Ma (Phase I, newly termed “Goguryeo Disturbance”) and a later one during 80–50 Ma (Phase III, belonging to “Bulguksa Orogeny”). The mean rotation rate in the interval from 115.2 to 103.8 Ma (Phase I) is about 0.74°/Ma, while the rate from 90.9 to 79.8 Ma (Phase II) is 0.19°/Ma. Based on paleolatitude change during Phase I, we infer that the Korean Peninsula (eastern part of the Sino-Korea Block) migrated southward about 300 km after the complete amalgamation of the Sino-Korea Block into the Eurasian continent resulting in N–S compression within the Korean peninsula and Manchuria. Large-scale strike-slip faults (e.g., Tan-Lu Fault, Okcheon Boundary Fault) were probably rejuvenated in the Sino-Korea Block during Phase I.     

Virtual wave gauges based upon stereo imaging for measuring surface wave characteristics

A virtual wave gauge (VWG) technique based on stereo imaging is developed to remotely measure water wave height, period, and direction. VWG minimizes computational costs by directly tracking the elevation of the water surface at selected points of interest using a Eulerian based dynamic searching algorithm. Results show that the VWG technique developed in this paper dramatically improves efficiency by two orders of magnitude compared to the traditional Lagrangian–Eulerian based point cloud method of stereo image processing. VWG is tested against traditional wave wire gauges to within 98% accuracy for significant wave height. Furthermore, the flexibility of the VWG is demonstrated in two field applications. First in an offshore breaking wave case, an array of VWGs is used to efficiently measure wave directionality. Second to investigate the reflection coefficient of a rock-mounted structure interacting with nearshore waves, linear and spatial VWG arrays are designed and implemented based on a priori information of the wave field from a preliminary VWG measurement. Overall, we demonstrate that the flexible and computational efficient VWG technique has the potential to make real-time remote stereo imaging wave measurements a reality.     

Comparison of radiocarbon and OSL dating methods for a Late Quaternary sediment core from Lake Ulaan,Mongolia

Both radiocarbon and optically stimulated luminescence (OSL) dating methods were applied to test their suitability for establishing a chronology of arid-zone lacustrine sediments using a 5.88-m-long core drilled from Lake Ulaan, southern Mongolia. Although the radiocarbon and OSL ages agree in some samples, the radiocarbon ages are older than the corresponding OSL ages at the 550-cm depth horizon (late Pleistocene) and in the 100–300-cm interval (early to late Holocene). In the early to late Holocene, radiocarbon ages are consistently older than OSL ages by 4,100–5,800 years, and in the late Pleistocene by 2,700–3,000 years. Grain-size analysis of early to late Holocene sediments and one late Pleistocene sediment sample (550-cm depth) indicates that eolian processes were the dominant sediment-transport mechanism. Also, two late Pleistocene sediments samples (from 400- to 500-cm depths) are interpreted to have been deposited by both eolian and glaciofluvial processes. Accordingly, the radiocarbon ages that were older than the corresponding OSL ages during the Holocene seem to have been a consequence of the influx of ¹⁴C-deficient carbon delivered from adjacent soils and Paleozoic carbonate rocks by the westerly winds, a process that is also active today. In addition to the input of old reworked carbon by eolian processes, the late Pleistocene sediments were also influenced by old carbon delivered by deglacial meltwater. The results of this study suggest that when eolian sediment transport is suspected, especially in lakes of arid environments, the OSL dating method is superior to the radiocarbon dating method, as it eliminates a common ‘old-carbon’ error problem.     

Discharge prediction using hydraulic characteristics of mean velocity equation

Discharge is an important factor in river design for water utilization, water control and hydraulic structures; therefore, an accurate estimation of the discharge is required. At present, a rating curve depicting the relationship between a stage and discharge is used to calculate the discharge from river systems. Although the rating curve has an advantage in that it can predict and use the discharge during the flood season in which the measurement is difficult, there is room for improvement as it does not reflect the hydraulic characteristics of rivers. Therefore, in this study, discharge was predicted using the convenient calculation method with empirical mediating variables of the Manning and Chezy equations which were proposed by the author’s previous research as a new methodology for estimating discharge in an open channel. This was proven, based on the data measured in a meandering open channel system in a lab at the Mississippi River in the US and at the Columbia Del Dique Canal, and an accuracy level at a coefficient of 0.8 was demonstrated. Thus, this method, which reflects the hydraulic characteristics and predicts the discharge in a simple manner, is expected to be convenient in practice.