The origin of refractory minerals in comet 81P/Wild 2

Refractory Ti-bearing minerals in the calcium-, aluminum-rich inclusion (CAI) Inti, recovered from the comet 81P/Wild 2 sample, were examined using analytical (scanning) transmission electron microscopy (STEM) methods including imaging, nanodiffraction, energy-dispersive spectroscopy (EDX) and electron energy loss spectroscopy (EELS). Inti fassaite (Ca(Mg,Ti,Al)(Si,Al)₂O₆) was found to have a Ti³⁺/Ti⁴⁺ ratio of 2.0 ± 0.2, consistent with fassaite in other solar system CAIs. The oxygen fugacity (logf_O2) of formation estimated from this ratio, assuming equilibration among phases at 1509 K, is −19.4 ± 1.3. This value is near the canonical solar nebula value (−18.1 ± 0.3) and in close agreement with that reported for fassaite-bearing Allende CAIs (−19.8 ± 0.9) by other researchers using the same assumptions. Nanocrystals of osbornite (Ti(V)N), 2–40 nm in diameter, are embedded as inclusions within gehlenite, spinel and diopside in Inti. Vanadium is heterogeneously distributed within some osbornite crystals. Compositions range from pure TiN to Ti_0.36V_0.64N. The possible presence of oxide and carbide in solid solution with the osbornite was evaluated. The osbornite may contain O, but C is not present at detectable levels. The presence of osbornite, likely a refractory early condensate, together with the other refractory minerals in Inti, indicates that the parent comet contains solids that condensed closer to the proto-sun than the distance at which the parent comet itself accreted. The estimated oxygen fugacity and the reported isotopic and chemical compositions are consistent with Inti originating in the inner solar system like other meteoritic CAIs. These results provide insight for evaluating the validity of models of radial mass transport dynamics in the early solar system. The oxidation environments inferred for the Inti mineral assemblage are inconsistent with an X-wind formation scenario. In contrast, radial mixing models that allow accretion of components from different heliocentric distances can satisfy the observations from the cometary CAI Inti.     

The dynamics of chironomid assemblages and vegetation during the Late Quaternary at Laguna Facil, Chonos Archipelago, southern Chile

We compare high-resolution pollen and chironomid records from the last 15,000 yr in Laguna Facil, southern Chile. Major vegetation and chironomid changes are recorded between ca 14,900 and 14,700 cal. yr BP. During the Lateglacial, changes in the chironomid stratigraphy lag behind changes in the pollen stratigraphy suggesting that the chironomids are responding to changes in the tree canopy or in soil chemistry brought about by vegetational development. At about 7200 cal. yr BP there is a change in the chironomid stratigraphy in advance of changes in the vegetation. This suggests that the response is to regional climatic change. The relatively close correlation of the chironomid and pollen stratigraphies with changes in charcoal concentrations also implicates the importance of fire and/or vulcanism in influencing the dynamics of forest and limnological systems. There is no clear evidence of cooling during the Younger Dryas chronozone in Laguna Facil.     

Hydrothermal alteration of Variscan granites,southern Schwarzwald,Federal Republic of Germany

Hercynian S-type granites from the southeastern Schwarzwald granite series represent cogenetic biotite-and two-mica granites. Oxygen- and hydrogen-isotope data show that hydrothermal alteration invoking isotopically light surface waters resulted in a drastic reduction in ¹⁸O and D and pronounced disequilibrium between the minerals. Effective water-rock ratios are calculated to be high, about 0.8 vol units. A shift in the¹⁸O/¹⁶O and the chemical composition of the fluid due to water-rock interaction is continuously traced from pure H₂O with meteoric isotopic character in the deep-seated biotite granites to slightly saline water with rock-equilibrated isotopic composition in the two-mica granites at a shallower level. Substantial retrograde hydrometamorphism in the temperature range 500° to 200° C resulted mineralogically in high-temperature chloritization of biotite, and low-temperature muscovitization as well as feldspar alteration, respectively. Another result of the re-equilibration of cations is strong disturbance of the Rb–Sr system which affects measured ages and initial⁸⁷Sr/⁸⁶Sr values. Hydrothermal differentiation and alteration probably overlap to a very large extent magmatic differentiation processes.     

Increased hydrocarbon recovery and CO2 management, a Croatian example

Enhanced oil recovery based on CO₂ injection is expected to increase recovery from Croatian oil fields. Large quantities of CO₂ are generated during hydrocarbon processing produced from gas and gas condensate fields situated in the north-western part of Croatia. First CO₂ injection project will be implemented on the Ivani? Oil Field. Numerical modelling based on Upper Miocene sandstone core samples testing results have shown the decrease of oil viscosity during CO₂ injection. Some of the characteristics of the testing samples are porosity 21.5–23.6 %, permeability 14–80 × 10^?15 m² and initial water saturation 28–38.5 %. Water alternating foam (WAF) and water alternating gas (WAG) simulations have provided satisfactory results. The WAF injection process has provided better results, but due to the process sensitivity and costs WAG is recommended for future application. During the pilot project 16 × 10⁶ m³ CO₂ and 5 × 10⁴ m³ of water were injected. Additional amounts of hydrocarbons (4,440 m³ of oil and 2.26 × 10⁶ m³ of gas) were produced which confirmed injection of CO₂ as a successful tertiary oil recovery mechanism in Upper Miocene sandstone reservoirs in the Croatian part of the Pannonian Basin System.     

The origin of high δ<Superscript>18</Superscript>O zircons: marbles,megacrysts, and metamorphism

The oxygen isotope ratios (δ¹⁸O) of most igneous zircons range from 5 to 8‰, with 99% of published values from 1345 rocks below 10‰. Metamorphic zircons from quartzite, metapelite, metabasite, and eclogite record δ¹⁸O values from 5 to 17‰, with 99% below 15‰. However, zircons with anomalously high δ¹⁸O, up to 23‰, have been reported in detrital suites; source rocks for these unusual zircons have not been identified. We report data for zircons from Sri Lanka and Myanmar that constrain a metamorphic petrogenesis for anomalously high δ¹⁸O in zircon. A suite of 28 large detrital zircon megacrysts from Mogok (Myanmar) analyzed by laser fluorination yields δ¹⁸O from 9.4 to 25.5‰. The U–Pb standard, CZ3, a large detrital zircon megacryst from Sri Lanka, yields δ¹⁸O = 15.4 ± 0.1‰ (2 SE) by ion microprobe. A euhedral unzoned zircon in a thin section of Sri Lanka granulite facies calcite marble yields δ¹⁸O = 19.4‰ by ion microprobe and confirms a metamorphic petrogenesis of zircon in marble. Small oxygen isotope fractionations between zircon and most minerals require a high δ¹⁸O source for the high δ¹⁸O zircons. Predicted equilibrium values of Δ¹⁸O(calcite-zircon) = 2–3‰ from 800 to 600°C show that metamorphic zircon crystallizing in a high δ¹⁸O marble will have high δ¹⁸O. The high δ¹⁸O zircons (>15‰) from both Sri Lanka and Mogok overlap the values of primary marine carbonates, and marbles are known detrital gemstone sources in both localities. The high δ¹⁸O zircons are thus metamorphic; the 15–25‰ zircon values are consistent with a marble origin in a rock-dominated system (i.e., low fluid_(external)/rock); the lower δ¹⁸O zircon values (9–15‰) are consistent with an origin in an external fluid-dominated system, such as skarn derived from marble, although many non-metasomatized marbles also fall in this range of δ¹⁸O. High δ¹⁸O (>15‰) and the absence of zoning can thus be used as a tracer to identify a marble source for high δ¹⁸O detrital zircons; this recognition can aid provenance studies in complex metamorphic terranes where age determinations alone may not allow discrimination of coeval source rocks. Metamorphic zircon megacrysts have not been reported previously and appear to be associated with high-grade marble. Identification of high δ¹⁸O zircons can also aid geochronology studies that seek to date high-grade metamorphic events due to the ability to distinguish metamorphic from detrital zircons in marble.     

Testing the fidelity of thermometers at ultrahigh temperatures

A highly residual granulite facies rock (sample RG07‐21) from Lunnyj Island in the Rauer Group, East Antarctica, presents an opportunity to compare different approaches to constraining peak temperature in high‐grade metamorphic rocks. Sample RG07‐21 is a coarse‐grained pelitic migmatite composed of abundant garnet and orthopyroxene along with quartz, biotite, cordierite, and plagioclase with accessory rutile, ilmenite, zircon, and monazite. The inferred sequence of mineral growth is consistent with a clockwise pressure–temperature (P–T) evolution when compared with a forward model (P–T pseudosection) for the whole‐rock chemical composition. Peak metamorphic conditions are estimated at 9 ± 0.5 kbar and 910 ± 50°C based on conventional Al‐in‐orthopyroxene thermobarometry, Zr‐in‐rutile thermometry, and calculated compositional isopleths. U–Pb ages from zircon rims and neocrystallized monazite grains yield ages of c. 514 Ma, suggesting that crystallization of both minerals occurred towards the end of the youngest pervasive metamorphic episode in the region known as the Prydz Tectonic Event. The rare earth element compositions of zircon and garnet are consistent with equilibrium growth of these minerals in the presence of melt. When comparing the thermometry methods used in this study, it is apparent that the Al‐in‐orthopyroxene thermobarometer provides the most reliable estimate of peak conditions. There is a strong textural correlation between the temperatures obtained using the Zr‐in‐rutile thermometer––maximum temperatures are recorded by a single rutile grain included within orthopyroxene, whereas other grains included in garnet, orthopyroxene, quartz, and biotite yield a range of temperatures down to 820°C. Ti‐in‐zircon thermometry returns significantly lower temperature estimates of 678–841°C. Estimates at the upper end of this range are consistent with growth of zircon from crystallizing melt at temperatures close to the elevated (H₂O undersaturated) solidus. Those estimates, significantly lower than the calculated temperature of this residual solidus, may reflect isolation of rutile from the effective equilibration volume leading to an activity of TiO₂ that is lower than the assumed value of unity.     

Description of an aerodynamic levitation apparatus with applications in Earth sciences

Background  

In aerodynamic levitation, solids and liquids are floated in a vertical gas stream. In combination with CO₂-laser heating, containerless melting at high temperature of oxides and silicates is possible. We apply aerodynamic levitation to bulk rocks in preparation for microchemical analyses, and for evaporation and reduction experiments.     

The formation of headland/island sandbanks

There are four extensive sandbanks in the vicinity of the Isle of Portland, a headland in the English Channel. The formation and maintenance of the two most prominent of these sandbanks (one on either side of the headland) can largely be explained by net bedload convergence, driven by instantaneous headland eddies generated by tidal flow past the headland. However, there are also two less prominent sandbanks (again, one on either side of the headland), which are not located in zones of bedload convergence. It is suggested here that these latter two sandbanks were formed when the Isle of Portland was isolated from the mainland by a tidal strait. Relative sea-level data and radiocarbon dates indicate that this would have occurred ca. 9–7 ka BP, prior to the closure of the strait by sedimentation. Tidal flow through this strait generated eddy systems in addition to the headland eddies, leading to the formation of associated headland/island sandbanks. At 7 ka BP, sedimentation resulted in closure of the strait, leading to the present-day headland configuration, and subsequent reworking of these now moribund sandbanks formed by the strait. A series of idealised morphological model experiments, parameterised using bedrock depths and glacial isostatic adjustment model output of relative sea level, are here used to simulate this hypothesised sequence of sandbank evolution over the Holocene. The results of the model experiments are corroborated by in situ observations of bedforms and sediment characteristics, and by acoustic Doppler current profiler (ADCP) data applied to predictions of bedload transport over the sandbanks. In addition to demonstrating the mechanism which leads to the formation of sandbanks by tidal flow through a strait, the model results show that upon subsequent closure of such a strait, these sandbanks will no longer be actively maintained, in contrast to sandbanks which are continuously maintained by headland eddies.     

Reduction in Exhaust Gas Temperature of Biodiesel Fueled Engine by Exhaust Gas Recirculation

Biodiesel is a renewable alternative fuel that can be used as substitute for mineral diesel. The use of biodiesel in diesel engines reduces all of the exhaust emissions expect NO_x. The higher temperature in the combustion chamber increases the NO_x emissions. The recirculation of a small percentage of cooled exhaust gases into the combustion chamber through the intake manifold reduces the in‐cylinder temperature. Moreover, the cooling of exhaust gases before mixing with fresh air introduced to the engine does not affect its volumetric efficiency but it absorbs the heat of combustion. This leads to a reduction in NO_x emissions and improves the engine brake thermal efficiency. This paper describes the investigation of the performance and emission characteristics of a biodiesel‐fueled, naturally aspirated, single cylinder diesel engine with cooled exhaust gas recirculation.     

Interpreting a Pumping Test Influenced by Another Well in an Anisotropic Aquifer

In confined aquifers the influence of neighboring active wells is often neglected when interpreting a pumping test. This can, however, lead to an erroneous interpretation of the pumping test data. This article presents simple methods to evaluate the transmissivity tensor and storativity of an anisotropic confined aquifer when there is an interfering well in the neighborhood of the tested well. Two methods have been developed depending on whether the tested well or the interfering well is the first in operation. These new methods yield better estimates of the hydraulic parameters than when the influence of the interfering well is neglected. These methods have then been used on data obtained from numerical models with an interfering well and the results have been compared to an analytical method that neglects the influence of the interfering well. The methods require knowledge of the pumping rate of the interfering well and the time elapsed since the pumping started in each well. If the interfering well started pumping before the tested well, the method does not require knowledge of the aquifer piezometric level at the beginning of the test, which is often unknown in this case. As for the method without interference, at least three monitoring wells (MWs) are needed, the position of which influences the accuracy of the estimated parameters. Some recommendations concerning MWs position have been given to get more accurate results according to the sought parameter.