Crystallization pathways in the Great Artesian Basin (Australia) spring mound carbonates: Implications for life signatures on Earth and beyond

Recent studies of continental carbonates revealed that carbonates with similar fabrics can be formed either by biotic, biologically-induced, biologically-influenced or purely abiotic processes, or a combination of all. The aim of this research is to advance knowledge on the formation of carbonates precipitated (or diagenetically altered) in extreme, continental environments by studying biotic versus abiotic mechanisms of crystallization, and to contribute to the astrobiology debate around terrestrial analogues of Martian extreme environments. Both fossil (upper Pleistocene to Holocene) and active carbonate spring mounds from the Great Artesian Basin (South Australia) have been investigated. These carbonates consist of low-Mg to high-Mg calcite tufa. Four facies have been described: (i) carbonate mudstone/wackestone; (ii) phytohermal framestone/boundstone; (iii) micrite boundstone; and (iv) coarsely crystalline boundstone. The presence of filaments encrusted by micrite, rich in organic compounds, including ultraviolet-protectants, in phytohermal framestone/boundstone and micrite boundstone is clear evidence of the existence of microbial mats at the time of deposition. In contrast, peloidal micrite, despite commonly being considered a microbial precipitate, is not directly associated with filaments in the Great Artesian Basin mounds. It has probably formed from nanocrystal aggregation on colloid particulate. Thus, where biofilms have been documented, it is likely that bacteria catalyzed the development of fabrics. It is less certain that microbes induced calcium carbonate precipitation elsewhere. Trace elements, including rare earth element distribution from laminated facies, highlight strongly evaporative settings (for example, high Li contents). Carbon dioxide degassing and evaporation are two of the main drivers for an increase in fluid alkalinity, resulting in precipitation of carbonates. Hence, although the growth of certain fabrics is fostered by the presence of microbial mats, the formation of carbonate crystals might be independent from it and mainly driven by extrinsic factors. More generally, biological processes may be responsible for fabric and facies development in micritic boundstone whilst micrite nucleation and growth are driven by abiotic factors. Non-classical crystallization pathways (aggregation and fusion of nanoparticles from nucleation clusters) may be more common than previously thought in spring carbonate and this should be carefully considered to avoid misinterpretation of certain fabrics as by-products of life. It is proposed here that the term ‘organic-compound catalyzed mineralization’ should be used for crystal growth in the presence of organic compounds when dealing with astrobiological problems. This term would account for the possibility of multiple crystallization pathways (including non-classical crystallization) that occurred directly from an aqueous solution without the direct influence of microbial mats.     

Effect of agrochemicals on macroinvertebrate assemblages in Pampasic streams,Buenos Aires,Argentina

Agricultural practices have been intensified in recent decades in Argentina. The Pampa plain is the main agricultural region of the country. The effect of increased application of agrochemicals on the invertebrate fauna of the Pampasic streams remains unreported. In the present study, we compared the abundance and composition of invertebrate assemblages in seven Pampasic streams with contrasting soil use in their basins. Two streams run through intensively cropped plots, two drain basins with livestock fields, while the other three are located within a biosphere Reserve. Higher nutrient and insecticide concentrations were measured in the streams draining cropped basins, related with pesticide applications and crop fertilization. The invertebrate assemblage composition of the cropped streams differed significantly from the others and between the two. Present evidence suggests that the impact of agrochemicals results in a change in composition with decreased abundance or absence of sensitive species such as Hyalellidae, Caenidae, Baetidae and Curculionidae and increased abundance of more tolerant taxa: Ostracoda, Glossiphoniidae (Hirudinea), Ancylidae (Gundlanchia), Ampullariidae (Pomacea canaliculata), Sphaeriidae and Dugesiidae. Available information suggests that macrophyte cover and composition also influence the invertebrate assemblages of the Pampasic streams.     

An indurated Pleistocene coastal barrier on the inner shelf of the Gulf of Valencia (western Mediterranean): evidence for a prolonged relative sea-level stillstand

The objective of this study is to document and interpret a recently discovered carbonate-cemented coastal barrier on the inner shelf of the Gulf of Valencia (western Mediterranean Sea). The coastal barrier was identified in a high-resolution digital bathymetric model based on a cartographic survey of the study area using a multibeam echosounder. Moreover, radiocarbon dating and petrographic analyses were performed on a rock sample recovered from the seabed. The data reveal the submerged coastal barrier to be approx. 1.7 km wide and 70 km long, and incised by channels of various dimensions. Aligned more or less parallel to the modern coastline, it is interpreted as corresponding to the shoreline of a former sea-level stillstand. The barrier and lagoon system became stranded above sea level in the course of a subsequent forced regression, which also caused the incision of the river courses. Age dating of the cemented rock suggests that the fossil coastal barrier most probably formed during the prolonged Tyrrhenian (Eemian) sea-level highstand, induration taking place by carbonate cementation at the contact between freshwater and seawater (beach-rock formation). The fact that the fossil barrier is today submerged below modern sea level is explained by the sustained subsidence affecting the region.     

Geomorphologic map of the 1<Superscript>st</Superscript> Mutnaya River,Southeastern Kamchatka,Russia

The Kamchatka Peninsula–situated in the Pacific “Ring of Fire”–has 29 active and over 400 extinct volcanoes. Since it is situated in the northeastern extremity of Russia, in subarctic climate, the volcanic landforms are overprinted by the 446 glaciers. This research focuses on the 1^stMutnaya catchment which drains the southern slopes of two active volcanoes: Avachinsky and Koryaksky. Those volcanoes are a permanent threat for the cities of Petropavlovsk and Elizovo, which are the 2 of 3 cities of the peninsula. Hence, most of the studies carried out in the area dealt with the natural hazards and only few focus on landscape evolution. Thus, the purpose of this study was to elaborate a cartographic approach which integrates classic geomorphology with state of the art GIS and remote sensing techniques. As result, different landforms and related processes have been analysed and included in the first general geomorphologic map of the 1^stMutnaya catchment.     

Nearshore bar migration and sediment-induced buoyancy effects

A 1-D General Ocean Turbulence Model that includes the effects of sediment-induced stratification is shown to simulate the observed onshore and offshore migration of a nearshore sandbar. The only two free parameters of the model, the bed reference concentration and the sediment diffusivity, are taken from the literature, rather than tuned to the data used here. The model results suggest that predictions of onshore bar migration, in which wave-induced sediment transport confined to within a few centimeters of the bottom dominates, are not greatly affected by accounting for buoyancy effects. The model results also suggest that both mean flows and waves transport sediment during offshore bar migration, with different components of transport dominating at different cross-shore locations across the bar-trough bathymetry. Neglecting the effects of sediment-induced stratification results in higher model skill during the largest waves, likely because the excess turbulence production simulated by the non-stratified model is counterbalanced by neglected breaking-wave-generated turbulence. Considering both onshore and offshore migration, the model that includes sediment-induced stratification has higher skill than the model without stratification.     

Seismic driven probabilistic classification of reservoir facies for static reservoir modelling: a case history in the Barents Sea

In this paper we present a case history of seismic reservoir characterization where we estimate the probability of facies from seismic data and simulate a set of reservoir models honouring seismically‐derived probabilistic information. In appraisal and development phases, seismic data have a key role in reservoir characterization and static reservoir modelling, as in most of the cases seismic data are the only information available far away from the wells. However seismic data do not provide any direct measurements of reservoir properties, which have then to be estimated as a solution of a joint inverse problem. For this reason, we show the application of a complete workflow for static reservoir modelling where seismic data are integrated to derive probability volumes of facies and reservoir properties to condition reservoir geostatistical simulations. The studied case is a clastic reservoir in the Barents Sea, where a complete data set of well logs from five wells and a set of partial‐stacked seismic data are available. The multi‐property workflow is based on seismic inversion, petrophysics and rock physics modelling. In particular, log‐facies are defined on the basis of sedimentological information, petrophysical properties and also their elastic response. The link between petrophysical and elastic attributes is preserved by introducing a rock‐physics model in the inversion methodology. Finally, the uncertainty in the reservoir model is represented by multiple geostatistical realizations. The main result of this workflow is a set of facies realizations and associated rock properties that honour, within a fixed tolerance, seismic and well log data and assess the uncertainty associated with reservoir modelling.     

Landslide HotSpot Mapping by means of Persistent Scatterer Interferometry

Landslide detection and mapping represent fundamental requirements for every hazard and risk evaluation and consequent improvement of the management strategies for such natural hazards. Optical and radar remote sensing can be used to observe landslide-induced ground deformation, ranging from regional to local scales. This work presents a methodology called Landslide HotSpot Mapping; this approach integrates cartographic, thematic and optical data with Persistent Scatterer Interferometry for the identification of extremely slow to very slow moving landslides, and for the evaluation of their state of activity and intensity. This methodology scans wide areas to detect hotspots, which are narrow unstable zones characterized by higher landslide hazard. To these hotspots, priority has to be given when planning field surveys and in situ validation campaigns, so that field work time and effort can be optimized and significantly reduced. The approach is tested in Central Calabria, over a 4,470?km² area located in southern Italy. ENVISAT ascending images acquired between 2003 and 2009 and processed with the Persistent Scatterer Pairs (PSP) technique are used to analyse deformation patterns. Combining conventional photo-interpretation with the analysis of PSP data, 64 new landslides are identified and the spatial (boundaries) and temporal (activity) information of 980 pre-mapped phenomena (23.6% of updated inventory) are updated. 1,012 active (continuous or reactivated) landslides are identified and 4 hotspot areas selected: San Fili, Rende, Lago, Catanzaro. Urgent field checks have to be organized for these hotspots to validate the satellite-based observations and to design appropriate mitigation measures to reduce impacts on the elements at risk.     

Evolution of anthropogenic and biomass burning emissions of air pollutants at global and regional scales during the 1980�C2010 period

Several different inventories of global and regional anthropogenic and biomass burning emissions are assessed for the 1980?C2010 period. The species considered in this study are carbon monoxide, nitrogen oxides, sulfur dioxide and black carbon. The inventories considered include the ACCMIP historical emissions developed in support of the simulations for the IPCC AR5 assessment. Emissions for 2005 and 2010 from the Representative Concentration Pathways (RCPs) are also included. Large discrepancies between the global and regional emissions are identified, which shows that there is still no consensus on the best estimates for surface emissions of atmospheric compounds. At the global scale, anthropogenic emissions of CO, NO_x and SO₂ show the best agreement for most years, although agreement does not necessarily mean that uncertainty is low. The agreement is low for BC emissions, particularly in the period prior to 2000. The best consensus is for NO_x emissions for all periods and all regions, except for China, where emissions in 1980 and 1990 need to be better defined. Emissions of CO need better quantification in the USA and India for all periods; in Central Europe, the evolution of emissions during the past two decades needs to be better determined. The agreement between the different SO₂ emissions datasets is rather good for the USA, but better quantification is needed elsewhere, particularly for Central Europe, India and China. The comparisons performed in this study show that the use of RCP8.5 for the extension of the ACCMIP inventory beyond 2000 is reasonable, until more global or regional estimates become available. Concerning biomass burning emissions, most inventories agree within 50?C80%, depending on the year and season. The large differences between biomass burning inventories are due to differences in the estimates of burned areas from the different available products, as well as in the amount of biomass burned.