济州岛西南泥质区粒度组分变化的古环境应用

利用激光粒度仪对位于东海陆架济州岛西南泥质区的B2孔进行了沉积物粒度分析,根据标准偏差变化检出了B2孔含有4个粒度组分：〉65．6、65．6～10．5、10．5～1．3和〈1．3μm,其中〉65．6μm粗组分含量很低,主要是以底栖有孔虫为主的生源沉积．各组分平均粒径和粒度含量随孔深的变化显示了65．6～10．5μm组分在B2孔含量较高（21％～30％）,变化最明显,是该孔对环境变化最敏感的粒度组分．研究表明该敏感组分的粒度含量和平均粒径变化主要受东亚冬季风的强弱变化制约,其变化恢复的近2ka来东亚冬季风变化和中国东部气候变化序列具有很好的一致性,证明65．6～10．5μm粒度组分可以作为东亚冬季风的替代指标．     

Growth stimulation and inhibition of natural phytoplankton communities by model organic ligands in the western subarctic Pacific

The influence of organic ligands on natural phytoplankton growth was investigated in high-nitrate low-chlorophyll (HNLC) waters and during a phytoplankton bloom induced by a mesoscale iron enrichment experiment (SEEDS II) in the western subarctic Pacific. The growth responses of the phytoplankton in the treatments with iron complexed with model ligand were compared with those with inorganic iron or a control. Desferrioxamine B and protoporphyrin IX were used as models for hydroxamate-type siderophore and tetrapyrrole-type cell breakdown ligand, respectively. In the HNLC water, iron associated with protoporphyrin IX especially stimulated smaller phytoplankton (<10 μm) growth, 1.5-fold more than did inorganic iron. Surprisingly, only the addition of protoporphyrin IX stimulated small phytoplankton growth, suggesting that these cell breakdown ligands might be more bioavailable for them. The protoporphyrin IX’s stimulatory effect on small phytoplankton was not observed during bloom decline phase. The growth of phytoplankton was inhibited in the treatment with desferrioxamine B-complexed iron, suggesting its low bioavailability for the natural phytoplankton community. Its inhibitory effects were particularly pronounced in pico-eukaryotic phytoplankton. During the iron-induced bloom, the phytoplankton’s iron-stress response gradually increased with the desferrioxamine B concentration, suggesting that the competition for iron complexation between natural ligands and desferrioxamine B affected phytoplankton growth. However, the pico-eukaryotes did seem better able to utilize the desferrioxamine B-complexed iron during the bloom-developing phase. These results indicate that the iron bioavailability for phytoplankton differs between bloom-developing and bloom-decline phases.     

Effect of ocean acidification on coastal phytoplankton composition and accompanying organic nitrogen production

The effect of ocean acidification, caused by the increase in pCO₂ in seawater, on phytoplankton population and on related organic nitrogen production was experimentally examined by use of a natural coastal microbial population. pCO₂ and pH were controlled by aeration with air in which pCO₂ was at the current level (control), for which ambient air was used, and with air in which pCO₂ was ??800?? and ??1200?? ppm, in 500-L culture vessels. The experiment was continued for 15?days after addition of the inorganic nutrients such as nitrate, phosphate, and silicate. During most of the experimental period, a minor increase in phytoplankton biomass was noted, probably because of low irradiance, an increase in phytoplankton biomass was observed at the end of the experiment. Flow cytometric and microscopic observations revealed that this increase was because of Chrysochromulina sp. (Haptophyceae). The growth of Chrysochromulina sp. was most obvious in the control vessel, and tended to be obscured by increasing pCO₂ (decrease in pH), indicating the possibility that ocean acidification inhibits the growth of specific phytoplankton groups, for example Chrysochromulina sp. Production of particulate organic nitrogen (PON), determined by the ¹⁵N tracer method, also diminished under acidified conditions compared with that at the current level.     

Quasi-static analysis of strike fault growth in layered media

We study the effects of structural inhomogeneity on the quasi-static growth of strike-slip faults. A layered medium is considered, made up of an upper layer bounded by a free surface and welded to a lower half-space with different elastic property. Mode III crack is employed as a mathematical model of strike-slip fault, which is nucleated in the lower half-space and then propagates towards the interface. We adopt FEM-β, newly proposed analysis method for failure, to simulate the quasi-statistic crack growth governed by the stress distribution in layered media. Our results show that along planar traces across interfaces a compliant upper layer has significant effects on promoting/suppressing crack growth before/after its extension into the layer and vice versa for a rigid one. This proposes a possibility that surface breaks due to strike-slip faulting could be arrested by deposit layers at the topmost part of the Earth's crust.     

Estimating the impact force generated by granular flow on a rigid obstruction

Flowing sediments such as debris and liquefied soils could exert a tremendous amount of force as they impact objects along their paths. The total impact force generally varies with slope angle, velocity at impact, and thickness of the flowing sediment. Estimation of the impact force of flowing sediments against protective measures such as earth retaining structures is an important factor for risk assessment. In this paper, we conduct small-scale laboratory physical modeling of sand flow at different slopes and measure the impact force exerted by this material on a fixed rigid wall. We also conduct numerical simulations in the Eulerian framework using computational fluid dynamics algorithms to analyze and reproduce the laboratory test results. The numerical simulations take into consideration the overtopping of the wall with sand, which influenced the measured impact force–time history responses. In addition, the numerical simulations are shown to capture accurately the change of the impact force with slope angle. Finally, the modeling approach conducted in this study is used to estimate the quasi-static force generated by the sediment as it comes to rest on the wall following impact.     

Strip Transect Sampling to Estimate Object Abundance in Homogeneous and Non-homogeneous Poisson Fields: a Simulation Study of the Effects of Changing Transect Width and Number

This paper investigates the use of strip transect sampling to estimate object abundance when the underlying spatial distribution is assumed to be Poisson. A design-based rather than model-based approach to estimation is investigated through computer simulation, with both homogeneous and non-homogeneous fields representing individual realizations of spatial point processes being considered. Of particular interest are the effects of changing the number of transects and transect width (or alternatively, coverage percent or fraction) on the quality of the estimate. A specific application to the characterization of unexploded ordnance (UXO) in the subsurface at former military firing ranges is discussed. The results may be extended to the investigation of outcrop characteristics as well as subsurface geological features.     

Tsunami damage to coastal defences and buildings in the March 11th 2011 M w 9.0 Great East Japan earthquake and tsunami

On March 11th 2011 a M _w 9.0 mega-thrust interface subduction earthquake, the Great East Japan Earthquake, occurred 130 km off the northeast coast of Japan in the Pacific Ocean at the Japan Trench, triggering tsunami which caused damage along 600 km of coastline. Observations of damage to buildings (including vertical evacuation facilities) and coastal defences in Tōhoku are presented following investigation by the Earthquake Engineering Field Investigation Team (EEFIT) at 10 locations in Iwate and Miyagi Prefectures. Observations are presented in the context of the coastal setting and tsunami characteristics experienced at each location. Damage surveys were carried out in Kamaishi City and Kesennuma City using a damage scale for reinforced concrete (RC), timber and steel frame buildings adapted from an earlier EEFIT tsunami damage scale. Observations show that many sea walls and breakwaters were overtopped, overturned, or broken up, but provided some degree of protection. We show the extreme variability of damage in a local area due to inundation depth, flow direction, velocity variations and sheltering. Survival of many RC shear wall structures shows their high potential to withstand local earthquake and significant tsunami inundation but further research is required into mitigation of scour, liquefaction, debris impact, and the prevention of overturning failure. Damage to steel and timber buildings are also discussed. These observations are intended to contribute to mitigation of future earthquake and tsunami damage by highlighting the key features which influence damage level and local variability of damage sustained by urban coastal infrastructure when subjected to extreme tsunami inundation depths.     

Short time scales of magma-mixing processes prior to the 2011 eruption of Shinmoedake volcano, Kirishima volcanic group, Japan

We estimated time scales of magma-mixing processes just prior to the 2011 sub-Plinian eruptions of Shinmoedake volcano to investigate the mechanisms of the triggering processes of these eruptions. The sequence of these eruptions serves as an ideal example to investigate eruption mechanisms because the available geophysical and petrological observations can be combined for interpretation of magmatic processes. The eruptive products were mainly phenocryst-rich (28 vol%) andesitic pumice (SiO₂ 57 wt%) with a small amount of more silicic pumice (SiO₂ 62–63 wt%) and banded pumice. These pumices were formed by mixing of low-temperature mushy silicic magma (dacite) and high-temperature mafic magma (basalt or basaltic andesite). We calculated the time scales on the basis of zoning analysis of magnetite phenocrysts and diffusion calculations, and we compared the derived time scales with those of volcanic inflation/deflation observations. The magnetite data revealed that a significant mixing process (mixing I) occurred 0.4 to 3 days before the eruptions (pre-eruptive mixing) and likely triggered the eruptions. This mixing process was not accompanied by significant crustal deformation, indicating that the process was not accompanied by a significant change in volume of the magma chamber. We propose magmatic overturn or melt accumulation within the magma chamber as a possible process. A subordinate mixing process (mixing II) also occurred only several hours before the eruptions, likely during magma ascent (syn-eruptive mixing). However, we interpret mafic injection to have begun more than several tens of days prior to mixing I, likely occurring with the beginning of the inflation (December 2009). The injection did not instantaneously cause an eruption but could have resulted in stable stratified magma layers to form a hybrid andesitic magma (mobile layer). This hybrid andesite then formed the main eruptive component of the 2011 eruptions of Shinmoedake.     

Modelling the impact of a hypothetical sub-Plinian eruption at La Soufrière of Guadeloupe (Lesser Antilles)

This paper describes the development and application of an impact model for a future hypothetical sub-Plinian eruption of La Soufrière of Guadeloupe. The model was designed to assess the impact from either a single or multiple eruption scenarios, each defined in terms of a map of the intensity of three volcanic hazards; volcanogenic earthquake, tephra fallout and pyroclastic density currents. The impact from the three hazards can be assessed independently or alternatively the joint impact of the three hazards can be assessed. The outputs that are produced from the model are; the number of buildings with collapsed roofs, and the number of fatal and non-fatal casualties.     

Rapid evolution of the Eocene accretionary complex (Hyuga Group) of the Shimanto terrane in southeastern Kyushu, southwestern Japan

Abstract   Detailed geologic examination of the Eocene accretionary complex (Hyuga Group) of the Shimanto terrane in southeastern Kyushu revealed that the oceanic plate was composed of Paleocene to Lower Eocene mudstone and siliceous mudstone, lower Middle Eocene red mudstone, and mid-Middle Eocene trench-fill turbidite with siltstone breccia, successively overlying the pre-Eocene oceanic plate. This oceanic plate sequence was overlain by Upper Eocene siltstone. Deposition of the lower Middle Eocene red mudstone was accompanied by basalt flows and it is interbedded with continental felsic tuff, which indicates that the basalt and red mudstone were deposited near the trench just before accretion. The Hyuga Group has very similar geological structure to that of the chert–clastic complexes found in the Jurassic accretionary complexes in Japan: that is, a decollement fault formed in the middle of an oceanic plate sequence, and an imbricate structure formed only in the upper part of the sequence. Thus, it appears that the Hyuga Group was formed by the same accretionary process as the Jurassic accretionary complexes. No accretion occurred before the Middle Eocene, and the rapid accretion of the Hyuga Group was commenced by the supply of coarse terrigenous sediments in the mid-Middle Eocene, when the direction of movement of the Pacific Plate changed. The pre-Eocene oceanic basement and lower Middle Eocene volcanic activity suggest that the oceanic plate partly preserved in the Hyuga Group was very similar to the northern part of the present West Philippine Sea Plate.