Systematic position ofMucronella perforata Okada et Mawatari 1937

Mucronella perforata was first discovered from Onagawa Bay, northern Honshu, Japan, in 1937 by Okada and Mawatari. It was reported from Hong Kong and its neighboring waters and was referred to the genusHippopodina Levinsen, 1909 of the Family Hippopodinidae Levinsen, 1909 by Huang et al. (1990) and Huang (1994). According to the astogeny of the species, both the ancestrula and its successor zooids have an ascus proximal to the orifice, and its hyperstomial ovicells are imperforate, so it could not be a member of any known genus of the known families of the superfamily Schizoporelloidea Jullien, 1883 in the infraorder Lepraliomorpha Gordon, 1989. The new genusPacificincola and the new family Pacificincolidae established respectively on the basis of reexaminations of the Chinese specimens obtained from the southern Yellow Sea, the East China Sea and the northern South China Sea.Schizoporella insculpta Hincks, 1880 andHippoporina mexicana Soule, Soule et Chaney, 1995 have been referred to the new genus in the paper. Contribution No. 3658 from the Institute of Oceanology, Chinese Academy of Sciences. Project 39670100 supported by NSFC and work also supported by the Special Foundation of Biota, IOCAS.     

Sedimentary macro-structures and forming mechanism of debris flow

IIWr~IOWThesedimentarycharacteristicsofdebrisflowcanreflectthecompoSition,fluidtypeandsedimentaryprocess.ThescholarswhostudymoderndebrisfloWinChinagenerallyclassifydebrisflowbythemethodofviscositywithfloWpattern.SeveraltypicalschemesareshowninTable1,inwhichthemethodofunitweight(fluiddensityinunitvolumet/m3)isusedandfluidunitweightisthoughttobethedirectproPOSitiontotheviscosityofdebrisflow(Wu,1990).Ithasbeenprovedbyhydrcrmechacsthatnon-cohesivedebrisf1OwfollowsBagnoldgranular'flowmedel(B…     

植物生长调节剂在龙眼短枝扦插中的应用

用３种生长素对龙眼插条进行处理,结果表明：龙眼插条不定根由愈伤组织分化而成,ＩＢＡ 能促进插条的愈伤组织发生,２．４－Ｄ 对插条叶片的保持效果最好,龙眼扦插的难点在于生根过程的后期阶段     

地基微波辐射计探测在黄河上游人工增雨中的应用

利用2003、2004年夏秋季在青海省河南县的地基双频段微波辐射计连续观测资料,在实施系统探测实验以进行辐射亮温值(TB(23.87),TB(31.65))与大气汽态总水汽含量(Q)和云中积分液态水含量(L)值反演处理的基础上,分析了黄河上游河曲地区的云水特征,并进行了降水预测及人工增雨作业指标的探讨。结果表明:在黄河上游河曲地区,7—9月纯晴天无云天气条件下,L值基本为0,表明了统计回归反演的显著性。多云条件下Q值和L值分别在3.76~4.75g·cm-2、227.34~859.42g·m-2的范围内。可降水云天气,Q值在5.23~8.65g·cm-2间,L值在421.18~1016.37g·m-2的范围内;积雨云个例分析表明,在降雨开始前近5小时的降雨酝酿期内,Q及L的增加有明显的波动,但在对流云出现并发展时,Q和L总是急剧上升,在降雨前达到一峰值;由河南站和西安站的Q、L值比较差异可以看出,Q、L值受水汽输送、地形等因素的影响,黄河上游河曲地区的人工增雨潜力有显著的优势;所计算出的降水预测阈值,可作为该地区人工增雨作业指标的参考。     

基于GIS技术的三江平原热量资源评价

基于GIS技术,使用黑龙江省气象观测站和农垦、森工系统观测站的气温资料,以及数字高程模型(DEM)资料,运用趋势面分析法和线性内插法得到三江平原栅格化的热量资源数据。分析表明,三江平原纬度和高度因子对各项热量指标分布均有影响,经度因子主要影响年平均气温、4月平均气温、7月平均气温、≥0℃积温和≥10℃积温;佳木斯西部、双鸭山西部、鸡西大部热量资源较丰富,而青黑山、完达山、老爷岭和太平岭等地区热量资源相对较差。分析结果为合理开发利用三江平原热量资源提供了依据。     

辽宁盖州震群剪切波分裂参数的时间演化特征

自2012年2月2日起,辽宁盖州地区发生多次4级以上地震,地震活动呈震群态势,且2020年依然持续.利用辽宁区域数字地震台网2008年1月至2018年12月近场小地震波形资料,采用剪切波分裂( SAM)方法,计算盖州震群中75次中小地震的剪切波分裂参数,并利用盖县( GAX)地震台(下文简称盖县台)记录分析剪切波分裂特...     

大别-胶南高压地体变质杂岩中流体包裹体特征和形成的热动力条件

在中国陆内南北板块之间古缝合线内大别-胶南高压地体中。分布着一套变质程度不一的杂岩系,我们将其划分出三期高峰变质作用形成的不同性质变形变质岩相带,并阐述了各自所代表的矿物流体包裹体特征,计算出它们形成时的温度、压力、氧逸度、差异应力等热动力参数,为揭示地体变形变质环境和构造演化特点,提供了可靠(?)数值根据。     

622铀矿床与虎圩金矿床REE特征对比

本文通过赣杭火山岩带中的铀矿床和金矿床的ＲＥＥ特征对比，认为产铀矿和金矿的火山岩均属ＬＲＥＥ富集型，但前者明显铕亏损，铀矿石与金矿石ＲＥＥ特征差别大，前者ΣＲＥＥ和ＨＲＥＥ大大增高，铕强烈亏损，后者ΣＲＥＥ降低，铕呈弱异常或无异常．结合两矿床各自的矿化特征，认为成矿热液酸碱度等介质条件、围岩蚀变、副矿物种类、矿物共生组合、次生淋滤富集等因素是造成矿石ＲＥＥ特征的原因，ＲＥＥ贫富程度和分布模式可作为矿床评价因素．     

天然钛榴石的穆斯堡尔谱及晶体化学分析

本文收集了一组钛榴石样品,作了穆斯堡尔谱和化学分析。采用各对应双峰等值限制拟合。拟合结果,统计误差X~2均较小。文中还分析了钛榴石结构的阳离子占位情况,并对其五对双峰谱指派如下:Fe~(3+)在[Y]位和(Z)位,Fe~(2+)在{X}和[Y]位,而另一对双峰指派为Fe~(2+){X}→Fe~(3+)(Z)的电荷离域。从化学分析和穆斯堡尔谱数据求出二种方法Fe~(2+)/∑Fe的差值,说明钛榴石中有Ti~(3+)的存在,用此简便方法估算了Ti~(3+)的含量,得出了四面体中阳离子的占位择优为Fe~(3+)>(Al~(3+),Ti~(4+))的结论。     

Calcified roasting-acid leaching process of vanadium from low-grade vanadium-containing stone coal

The low-grade vanadium-containing stone coal used in this experiment was collected from Wuxi Coun- try, Chongqing City, China. The experiment focused on the vanadium recovery from roasted residue through opti- mizing the process conditions of an effective and environmentally-friendly technology, named calcified roast- ing-sulfuric acid leaching technology. By single-factor experiments and orthogonal experiments, the effects of roast- ing temperature, roasting time, sulfuric acid concentration and leaching time on the leaching ratio of vanadium were analyzed. The results showed that the leaching ratio of vanadium reached 85.5% under the proper technological con- ditions of roasting temperature=950℃, roasting time=4 h, 40% concentration of sulfuric acid and leaching time=6 h.