甘薯高产栽培与气象条件浅析

甘薯喜高温强光，怕霜冻，耐旱、耐瘠不耐寒。文章就气象条件对甘薯的生长发育及高产栽培中的影响进行系列的分析，有助于提高甘薯品质，增加产量。     

非地转强迫对Fitow(0114)暴雨的影响

利用非静力中尺度模式MM5对 0 114号台风Fitow从 2 0 0 1年 8月 31日 0 0时～ 9月 2日 0 0时 (UTC ,下同 )的降水过程进行了模拟研究。结果表明 ,MM5对Fitow登陆过程中暴雨落区和强度的模拟与实况比较一致。模拟结果较好地再现了暴雨的中尺度特征。正是维持少动的台风倒槽和嵌入其中的中小尺度系统相互作用造成了暴雨的发生、发展 ,而高、低空中尺度散度场的配置对暴雨有很好的指示意义。在华南台风暴雨区无论是高层还是低层 ,都存在很强的非地转作用 ,非地转涡度项对散度倾向项是重要的强迫因素 ;但非地转作用的实现与中高纬度地区有本质的区别 ,在低层非地转作用是由于强的位势场气旋涡度 (- 2  <0 )与弱的流场气旋涡度 (fζ >0 )不平衡产生的 ;而高层非地转作用是由于强的位势场反气旋涡度 (- 2  >0 )与弱的流场反气旋涡度 (fζ <0 )不平衡产生的。非地转作用是暴雨中尺度系统上升运动发展的触发机制。从动力学角度解释了用非地转 Q矢量散度场来判断暴雨落区要比用准地转 Q矢量散度场好的原因。     

青藏高原云-辐射-加热效应和南亚夏季风--1985年与1987年对比分析

文中首先利用NCEP NCAR再分析的风场资料 ,分析了南亚夏季风的时空特征 ,选取了有代表性的典型强、弱夏季风年 ,继而利用ISCCP C2、ERBE S4卫星观测资料和NCEP NCAR再分析资料 ,对比分析了强、弱夏季风前期青藏高原地区的云—辐射—加热状况及其在海、陆差异中的作用。分析结果表明 ,南亚夏季风强或弱 ,其前期青藏高原地区的云—辐射—加热效应有明显的差异。在强 (弱 )南亚夏季风的前期 ,青藏高原大部分地区为相对少 (多 )云区 ,其云量变化不仅表明了此区的云—辐射—加热效应的不同 ,更重要的是与此同时出现的海、陆之间云量分布的“跷跷板”现象 ,进一步改变了海、陆之间的热力差异。而且 ,在强南亚夏季风年 ,这种热力差异不但开始得早 ,而且持续时间长、作用范围大 ,从而对南亚夏季风的形成和变化产生重要的影响     

利用ERS-2 SAR图像纹理分析方法揭示长白山天池火山近代喷发物空间分布特征

简单介绍了SAR图像的纹理特征以及正交小波变换纹理提取方法。论述了SAR图像的纹理特征参与分类的重要性。以长白山天池火山为例,通过对ERS2SAR图像进行纹理分析,提取了SAR图像两个层次的尺度变化、时频局部化和方向性纹理特征。并将SAR纹理特征与TM图像及DEM进行复合,利用多源信息各自的优势,进行了BP神经元网络分类,从较大范围对长白山天池火山735±15aB.P.大喷发的喷发物空间分布进行评价。获取了长白山天池火山近代喷发物的空间分布及规模。这对长白山天池火山未来喷发危险性初步评价、火山地质制图及火山灾害预测有重要意义。     

黄骅裂谷盆地第三系水循环和渗流场形成演化的重溯

在简述盆地地质环境和含水系统、水文地质期与水压系统类型定位的基础上，通过建立数学模型，采用反演、比拟和地静压力等方法，模拟计算了各研究层在各研究时期泥岩压出水水头值（m),Es^2层的依次为2－28，2－26，2－6，2－16，0．5－3．5；Es^1层的依次为2－42，2－26，2－6，10－54，1－14；Ed层的依次为2－22，2－54，2－12；Ng层的依次为10－24，1－5；Nm层的为12－24。各研究层在各研究时期的压挤式水交替强度均小于1，累加值Es^2,Es^1,Ed层的均大于1，Ng，Nm层的小于1；Ed层渗入水交替强度为0.44。各研究层在各研究时期渗流场的高水压带位置和流动态具有相似性，并均以离心型流动型为主要特征。     

Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.     

The BLAST-CODE model - A Computer-Aided Bench Blast Design and Simulation System

Blast design is a critical factor dominating fragmentation and cost of actual bench blasts. However, due to the varying nature of rock properties and geology as well as free surface conditions, reliable theoretic formulae are still unavailable at present and in most cases blast design is carried out by personal experience. As an effort to find a more scientific and reliable tool for blast design, a computer-aided bench blast design and simulation system, the BLAST-CODE model, is developed for Shuichang surface mine, Mining Industry Company of the Capital Iron and Steel Corporation Beijing. The BLAST-CODE model consists of a database representing geological and topographical conditions of the mine and the modules Frag + and Disp + for blast design and prediction of resultant fragmentation and displacement of rock mass. The two modules are established in accordance with cratering theory qualitatively and modified quantitatively by regression of the data collected from 85 bench blasting practices conducted in 3 mines of the Shuichang surface mine. Blasting parameters are selected based upon quantitative and comprehensive evaluation on the effect of the factors such as rock properties, geology, free surface conditions and detonation characteristics of the explosive products in use. In order to ensure practicality and reliability of the system, the BLAST-CODE model allows automatic adjustment to the selected parameters such as burden B and spacing S as well as explosive charge amount Q of any blasthole under irregular topographic and/or varying blastability conditions of the rock mass to be blasted. Simulation of the BLAST-CODE model includes prediction of fragmentation and displacement that are demonstrated in terms of swell factor, characteristic rock size x c and size distribution coefficient n by Rossin-Ramler's equation, and 3-dimentional muck pile profile. The BLAST-CODE model also permits interactive parameter selection based on comparison of the predicted fragmentation and displacement as well as the cost for drilling, explosives, and accessories until the most effective option can be selected.     

中条山同善天窗铜矿类型及找矿新认识

在总结同善构造—剥蚀窗内成矿地质条件的前提下 ,运用成矿系列理论 ,把区内具有多种表现形式的变基性火山岩型、变砂岩型、大理岩型三大类铜矿分成了八种亚类 ,认为诸类铜矿与区内广泛发育的新太古代基性岩存在着成生联系 ,铜矿的形成经历了一个复杂的过程。早期的海底火山喷发带来的铁、铜、硫等成矿物质 ,经过最初的海水富集、火山活动末期的热液作用富集以及后来区域变质叠加富集进而形成了这一系列矿床。同时提出了新的找矿思路、找矿方法及找矿靶区。     

Integrated Two-Dimensional Modeling of Fluid Flow and Compaction in a Sedimentary Basin

In this paper we employ mixed finite elements and numerically study an integrated two-dimensional model of fluid flow and compaction in a sedimentary basin. This model describes a single phase incompressible flow in a two-dimensional section of a sedimentary basin with vertical compaction. At each time step, an iterative algorithm is used to solve this model. The determination of the grid movement is based on the mass conservation and movement of sediments in the basin, while the mixed method is utilized to solve the fluid flow over the moving grid. Numerical experiments are presented to verify this iterative algorithm and show representative solutions for the model under consideration.     

Extracting coseismic deformation of the 1997 Mani earthquake with differential interferometric SAR

Introduction The development and application of Interferometric Synthetic Aperture Radar (InSAR) have a close relationship with the sensors development of Synthetic Aperture Radar (SAR). The conception of SAR is proposed comparatively to the real aperture radar antenna. It is well known that the longer the antenna is, the higher the observation resolution will be. Just limited by the length of the antenna, the resolution of real aperture radar is generally very low and cannot meet the r…