Experimental study of bed topography variations due to placement of a triad series of vertical piers at different positions in a 180° bend

In this study, scouring around piers perpendicular to flow (PPF) and piers toward the flow (PTF) under clear-water condition was examined by placing a set of triad cylindrical piers with a 5-cm diameter and a 15-cm center to center distance at the positions of 60, 90, and 120° of the bend at a constant flow rate of 70 l per second. Natural sand of uniform grain size and average diameter of 1 mm with a uniformity coefficient of 1.3 was used as bed material of the flume. According to the results of this study, the maximum scouring depth occurred in the PPF test situated at the position of 90° of the bend. In such a position, the maximum depth of scouring hole was equal to 1.1 times the depth of the flow at the beginning of the bend. Also, where the piers were positioned in PTF and PPF modes in a 60° angle, the maximum area of scouring hole was observed around piers and sediment piles at the downstream side of the piers. The maximum height of sedimentation occurred in the PPF test situated at the 90° position of the bend. Such a stack was as high as 0.7 times the flow depth at the beginning of the bend and was observed at the 156° position of the bend, at a 20% distance of the flume width from the inner bank. Further results as well as discussion and analysis are among other points presented in the article.     

A proposed spatial index to prioritize damaged buildings for allocating USAR operations

A spatial index using fuzzy hierarchical analysis (FAHP) is proposed in this study for prioritizing damaged buildings in the allocation of search and rescue operations after the earthquake disaster. The relevant prioritization criteria have been identified through literature review and interviews with 22 relief managers; the relative importance of these criteria and sub criteria has been computed using the FAHP method. The GIS layers equivalent to the selected criteria were prepared and integrated with one another after normalization in the GIS platform. The proposed method to prioritize the damaged buildings was implemented in the city of Varzeghan in the East Azerbaijan province of Iran. The obtained priority map, with five prioritization classes, is presented. Single-parameter sensitivity analysis method identifies the criteria ‘hazardous facilities’, ‘degree of building blockage’ and ‘chance of survival’ as the most effective criteria for prioritizing damaged buildings.     

A coarse-scale compositional model

In subsurface flow modeling, compositional simulation is often required to model complex recovery processes, such as gas/CO ₂ injection. However, compositional simulation on fine-scale geological models is still computationally expensive and even prohibitive. Most existing upscaling techniques focus on black-oil models. In this paper, we present a general framework to upscale two-phase multicomponent flow in compositional simulation. Unlike previous studies, our approach explicitly considers the upscaling of flow and thermodynamics. In the flow part, we introduce a new set of upscaled flow functions that account for the effects of compressibility. This is often ignored in the upscaling of black-oil models. In the upscaling of thermodynamics, we show that the oil and gas phases within a coarse block are not at chemical equilibrium. This non-equilibrium behavior is modeled by upscaled thermodynamic functions, which measure the difference between component fugacities among the oil and gas phases. We apply the approach to various gas injection problems with different compositional features, permeability heterogeneity, and coarsening ratios. It is shown that the proposed method accurately reproduces the averaged fine-scale solutions, such as component overall compositions, gas saturation, and density solutions in the compositional flow.     

The Gol-e-Zard Zn-Pb Deposit,Lorestan Province,Iran: a Metamorphosed SEDEX Deposit简

The Gol-e-Zard Zn-Pb deposit is one of several sediment-hosted Zn-Pb deposits found in the central part of the Sanadaj-Sirjan Zone, known as the Isfahan-Malayer belt, western Iran. Mineralization occurs in Upper Triassic to Jurassic phyllites and meta-sandstones. Sphalerite and galena are the most abundant metallic ores, with minor chalcopyrite. Calcite and quartz are the main gangue minerals. Fissure filling, replacement textures and especially mineralized faults, suggest an epigenetic stage in the Gol-e-Zard deposit formation. Geochemical studies of mineralized rocks show high concentrations of Zn, Pb and Cu,（Zn and Pb 〉 10000 ppm and Cu average 3000 ppm）. LREE enrichment（LREE〉HREE, La/Lu average 1.44） and positive Eu anomalies（Eu/Eu＊〉1 average 1.67） indicate reducing conditions during the deposition of deposit. However, some samples do not display negative Ce anomalies, which indicate that localized oxidizing conditions are also present. This study indicates that the Gol-e-Zard deposit formed due to circulating hydrothermal fluids in a marine environment. A SEDEX-type genesis, which is defined by circulating hydrothermal fluids through sediments in a marine environment, and syngenetic precipitation of Zn and Pb sulphides, is suggested for the Gol-e-Zard deposit. Emplacement of some granitoid intrusions such as the Aligudarz granitoid intrusion remobilized mineralizing fluids and metamorphosed the Gol-e-Zard deposit.     

Scleractinian coral communities of Hormuz Island in the Persian Gulf

The abundance and health of scleractinian coral communities of Hormuz Island were investigated. For this purpose, we employed 20 m line intercept transects—12 in the intertidal zone and 15 subtidally to evaluate coral cover and community composition. The estimated dead coral coverage was 6.21%±0.81%, while live coral coverage was 16.93%±1.81%, considered as very poor. Totally, 12 genera were recorded, of which Porites with 11.9%±1.4% live cover was the dominant, while Goniopora had the least cover (0.07%±0.08%). Based on Mann-Whitney U-test, live coral coverage, dead coral coverage, algal coverage, cover of other benthic organisms and abiotic components showed significant univariate differences between zones (p<0.05). The Spearman correlation test between the abundance of biotic and abiotic components indicated significant negative correlation of live coral and sand with zoantharian and significant positive correlation of algae and other benthic organisms with rubble. The reef health indices used for the corals indicated that, in general, the environmental conditions were not suitable, which could be attributed to both natural and anthropogenic factors, the most important of which was zoantharian’ overgrowth on the scleractinian corals in this region.     

Ascribing soil erosion types for sediment yield using composite fingerprinting technique

Abstract

Soil erosion and eroded sediment are serious threats to sound land management. However, less attention has been given to quantifying the importance of different soil erosion features based on appropriate control measures that could be designated. Accordingly, this research was planned to quantify the contribution of potential sediment sources, i.e. sheet, rill and gully erosion, in Idelo watershed in Zanjan Province, Iran, using composite fingerprinting. Toward this aim, 16 geochemical and organic tracers were detected in sediment sources and sediment deposited at the outlet. The results of applying the composite fingerprinting technique, with a relative error of 16%, showed that sheet, rill and gully sources contributed 56%, 44% and 0%, respectively, to sediment yield. It was also apparent from the results that the composite fingerprinting approach could be successfully utilized to assess the provenance of sediment deposited at the main outlet of the study watershed by soil erosion type.

Editor Z.W. Kundzewicz     

Developing an agricultural flood loss estimation function (case study: rice)

In recent years, flood control has been replaced by flood management concept in terms of living with flood, making benefit of it, and minimizing its losses. Succeeding in flood management in any region depends on the evaluation of different types of flood losses. Because of providing water resources and suitable arable lands, especially in arid and semiarid countries, floodplains are very important for agricultural activities. These lands are naturally vulnerable to flood; henceforth, determining the degree of protection and acceptable risk in flood damage-reduction projects without agricultural flood loss evaluation could be unrealistic. In this research, effective hydraulic parameters for flood loss estimation were determined and a set of laboratory tests were performed to evaluate the loss of rice, as the main crop in the study region, under different hydraulic conditions. In this regard, flow parameters like depth, velocity, multiplication of depth and velocity, shear stress, the Froude number, and the Reynolds number were employed for different rice growth stages including after transplanting, shooting, clustering, and harvesting. Analyzing the results showed that the Reynolds number, as a dimensionless parameter, is the best one for simulation of flood physical factor-loss function. Statistical analysis revealed that the logarithmic function is the best regression equation fitted to the Reynolds number-loss function. The amount of loss depends on growth stage; therefore, the time of flood occurrence is of vital importance for agricultural loss estimation. In this research, it was realized that the amount of loss is increased in the following order: after transplanting, shooting, harvesting, and clustering.     

Kinetic Determination of Trace Amounts of Nitrite Using an Optical Chemical Sensor

An optical chemical sensor (optode) is proposed for the kinetic determination of nitrite ion. The optode was fabricated by the immobilization of methyl violet on a triacetylcellulose polymeric membrane. Methyl violet is covalently bonded to a transparent triacetylcellulose film. By immersion of the sensor into an acidic nitrite solution, the absorbance of the sensor at 596 nm decreases with time that is due to the reaction of nitrite with the immobilized methyl violet. A fixed time method of 15 min was used to monitor the reaction. The linear range for the determination of nitrite was 0.20–8.00 µg mL^?1 and the limit of detection was 0.08 µg mL^?1. The optodes were one‐shot, they had durability more than 2 months and were easily prepared. The optode was successfully applied to the determination of nitrite ion in spring water and sewage samples.     

Ground motion record simulation for structural analysis by consideration of spectral acceleration autocorrelation pattern

A novel approach is introduced to generate simulated ground motion records by considering spectral acceleration correlations at multiple periods. Most of the current reliable Ground Motion Record(GMR) simulation procedures use a seismological model including source, path and site characteristics. However, the response spectrum of simulated GMR is somewhat different when compared with the response spectrum based on recorded GMRs. More specifi cally, the correlation between the spectral values at multiple periods is a characteristic of a record which is usually different between simulated and recorded GMRs. As this correlation has a signifi cant infl uence on the structural response, it is needed to investigate the consistency of the simulated ground motions with actual records. This issue has been investigated in this study by incorporating an optimization algorithm within the Boore simulation technique. Eight seismological key parameters were optimized in order to achieve approximately the same correlation coeffi cients and spectral acceleration between two sets of real and simulated records. The results show that the acceleration response spectra of the synthetic ground motions also have good agreement with the real recorded response spectra by implementation of the proposed optimized values.