Surface deformation related to the 2008 Wenchuan earthquake,and mountain building of the Longmen Shan,eastern Tibetan Plateau

The 12 May 2008 M_s 8.0 Wenchuan earthquake, China, was one of largest continental thrusting events worldwide. Based on interpretations of post-earthquake high-resolution remote sensing images and field surveys, we investigated the geometry, geomorphology, and kinematics of co-seismic surface ruptures, as well as seismic and geologic hazards along the Longmen Shan fold-and-thrust belt. Our results indicate that the Wenchuan earthquake occurred along the NE–SW-trending Yingxiu–Beichuan and Guanxian–Anxian faults in the Longmen Shan fold-and-thrust belt. The main surface rupture zones along the Yingxiu–Beichuan and Guanxian–Anxian fault zones are approximately 235 and 72 km in length, respectively. These sub-parallel ruptures may merge at depth. The Yingxiu–Donghekou surface rupture zone can be divided into four segments separated by discontinuities that appear as step-overs or bends in map view. Surface deformation is characterized by oblique reverse faulting with a maximum vertical displacement of approximately 10 m in areas around Beichuan County. Earthquake-related disasters (e.g., landslides) are linearly distributed along the surface rupture zones and associated river valleys.The Wenchuan earthquake provides new insights into the nature of mountain building within the Longmen Shan, eastern Tibetan Plateau. The total crustal shortening accommodated by this great earthquake was as much as 8.5 m, with a maximum vertical uplift of approximately 10 m. The present results suggest that ongoing mountain building of the Longmen Shan is driven mainly by crustal shortening and uplift related to repeated large seismic events such as the 2008 Wenchuan earthquake. Furthermore, rapid erosion within the Longmen Shan fold-and-thrust belt occurs along deep valleys and rupture zones following the occurrence of large-scale landslides triggered by earthquakes. Consequently, we suggest that crustal shortening related to repeated great seismic events, together with isostatic rebound induced by rapid erosion-related unloading, is a key component of the geodynamics that drive ongoing mountain building on the eastern Tibetan Plateau.     

Particle size effect on the saturation of methane hydrate in sediments – Constrained from experimental results

Except for those occurring at seafloor, most of natural gas hydrate form in sediments and are subject to the influence of sediment. Among these factors, the particle size effect on hydrate saturation level in sediment have been studied with a series of silica sands with various sizes, and the results obtained clearly indicate that particle size does play an important role in affecting the saturation level of hydrate in sediments. The proton relaxation times of water confined in the same series of silica sands, which were determined with NMR measurement, show logarithmic relationship with particle size. By comprehensive consideration of the results of hydrate saturation and water proton relaxation times, the particle size effect observed is tentatively explained by the water availability for hydrate formation in sediments.     

A development of the discontinuous deformation analysis for rock fall analysis

Discontinuous deformation analysis (DDA), a discrete numerical analysis method, is used to simulate the behaviour of falling rock by applying a linear displacement function in the computations. However, when a block rotates, this linear function causes a change in block size called the free expansion phenomenon. In addition, this free expansion results in contact identification problems when the rotating blocks are close to each other. To solve this problem of misjudgment and to obtain a more precise simulation of the falling rock, a new method called Post‐Contact Adjustment Method has been developed and applied to the program. The basic procedure of this new method can be divided into three stages: using the linear displacement function to generate the global matrix, introducing the non‐linear displacement function to the contact identification, and applying it to update the co‐ordinates of block vertices. This new method can be easily applied to the original DDA program, demonstrating better contact identification and size conservation results for falling rock problems than the original program. Copyright © 2005 John Wiley & Sons, Ltd.     

3D Structure of Arcade-Type Flares Derived from the Homologous Flare Series of 21, 24, and 27 February 1992

In February 1992, three flares, which we consider constitute a homologous flare series (flares having basically the same configuration repeating in the same situation), occurred in the active region NOAA 7070 and were observed by Yohkoh SXT. In the present paper, we first discuss the homology of these three flares, and derive the 3D structure by making use of the information obtained from the three different lines of sight at common phases. The result of this analysis made clear for the first time that the so-called `cusped arcade' at the maximum phase in the well-known 21 February 1992 flare is, contrary to the general belief, an `elongated arch' created at the beginning of the flare, seen with a shallow oblique angle. It is not the `flare arcade' seen on axis as widely conceived. This elongated arch roughly coincides with a diagonal of the main body of the soft X-ray arcade that came up later. The magnetic structure responsible for the flare as a whole turned out to be a structure with quadruple magnetic sources – with the third and fourth sources also playing essential roles. The observationally derived information in our paper provides strong restrictions to the theoretical models of the process occurring in arcade flares.     

An upper limit of visible emission from the plume generated by the impact of the K fragment of SL9

We monitored Jupiter with a video movie camera attached to a 1.3 m reflector during the impact event of the K fragment of D/Shoemaker-Levy 9. The camera was sensitive to visible radiation. A plume, which was generated by the impact and prominent in infrared wavelength, was not detected. Jovian images with hypothetical plumes were synthesized to examine how luminous the plume should have been to be recognized. It has been revealed that the plume was no more than twice as bright as Io in visible wavelength.     

Detection and accuracy of landslide movement by InSAR analysis using PALSAR-2 data

Interferometric synthetic aperture radar (InSAR) analysis is a radar technique for generating large-area maps of ground deformation using differences in the phase of microwaves returning to a satellite. In recent years, high-resolution SAR sensors have been developed that enable small-scale slope deformation to be detected, such as the partial block movement of a landslide. The L-band SAR (PALSAR-2) is mounted on Advanced Land Observing Satellite-2 (ALOS-2), which was launched on 24 Mar. 2014. Its main improvements compared with ALOS are enhanced resolution of as high as 3 m with a high-frequency recurrence period (14 days). Owing to its high resolution and the use of the L-band, PALSAR-2 can obtain reflective data passing through a tree canopy surface, unlike the other synthetic aperture radars. Therefore, the coherence of InSAR in mountainous forest areas is less likely to decrease, making it advantageous for the extraction of slope movement. In this study, to verify the accuracy of InSAR analysis using PALSAR-2 data, we compared the results of InSAR analysis and the measurement of the displacement in a landslide by global navigation satellite system (GNSS) observation. It was found that the average difference between the displacements obtained by InSAR analysis and the field measurements by GNSS was only 15.1 mm in the slant range direction, indicating the high accuracy of InSAR analysis. Many of the areas detected by InSAR analysis corresponded to the locations of surface changes due to landslide activity. Additionally, in the areas detected by InSAR analysis using multiple datasets, the ground changes due to landslide movement were confirmed by site investigation.     

Culture-dependent and independent analyses of subsurface microbial communities in oil-bearing strata of the Sagara oil reservoir

Abstract   Culture-dependent and independent methods were used to evaluate the microbial communities in cores collected at depths up to 200 m in oil-bearing and oil-free strata near the Sagara oil reservoir near Shizuoka, Japan. Direct microbial counts revealed much higher numbers (2.2 × 10⁴−7.9 × 10⁶/g) of microbes in the oil-bearing strata than in the oil-free zones, where counts were uniform at approximately 1.0 × 10⁴/g. Molecular taxonomic analyses via 16S rRNA gene sequence comparisons showed that the oil-free strata were dominated by members of the γ-Proteobacteria including Pseudomonas , Stenotrophomonas and Sphingomonas , whereas the oil-bearing strata were dominated by a single species closely related to Pseudomonas stutzeri . All archaeal clones were phylogenetically affiliated with the uncultured soil group in Crenarchaeota with the exception of a single phylotype that belonged to the genus Thermococcus . Culture-dependent analysis was carried out by most-probable-number culturing as well as direct plating to determine viable cell counts, using both complex organic substrates or native oil and autotrophic media. Both culture-dependent and independent methods revealed the abundant cultivable member was the aerobic oil-degrading bacterium Pseudomonas stutzeri and neither autotrophs nor anaerobic heterotrophs could be detected in the oil-bearing strata.     

Concentration of polychlorinated biphenyls (PCBs) in beached resin pellets: variability among individual particles and regional differences

Concentrations of polychlorinated biphenyls (PCBs) in beached resin pellets were examined to reveal variability between individual particles and differences among beaches. Fifty-five resin pellets from a beach in Tokyo were individually analyzed for PCBs, and showed concentrations ranging from <28 to 2,300 ng/g. This indicates that concentrations are highly variable between particles. Among several characters, discoloration (e.g., yellowing) had a positive relationship with PCB concentration: discolored pellets contained more PCBs than others on most of the beaches sampled. Given the color-selective ingestion of food by some organisms, this may be ecotoxicologically important. Measurements of samples from 47 beaches in Japan showed regional differences in PCB concentrations in resin pellets consistent with those in mussels. Sporadic high concentrations of PCBs were also found in pellets from remote islands, suggesting that resin pellets could be the dominant route of exposure to the contaminants at remote sites. The similarity of PCB concentrations between resin pellets and mussels suggests a potential use of resin pellets to monitor pollution in seawater.     

Flow of reinjected water and transmissibility distribution estimated by a tracer test in Otake Geothermal Reservoir, Japan

In order to estimate the distribution of pressure and transmissibility in the Otake Geothermal Reservoir, in which flow can be assumed to be two-dimensional and horizontal, well-head pressure and flow rates measured at both production and reinjection wells, and the time required for a tracer to arrive at certain production wells from one of the reinjection wells were analyzed. Analysis of these data was performed by means of an equation which was obtained by combining the Darcy and the continuity equations, in which the transmissibility and two components of the flow remain unknown. Estimation of pressure and transmissibility distributions and flow patterns within the reservoir was possible by numerical solution of this equation using the finite-difference method and by assuming suitable boundary conditions.