Horizontal distribution of particulate matter and its characterization using phosphorus as an indicator in surface coastal water,Harima-Nada,the Seto Inland Sea,Japan

To study the horizontal distribution and characterization of suspended particulate matter (SPM) in the coastal environment, the distribution and seasonal variation of particulate phosphorus (PP), divided as organic (POP) and inorganic (PIP) fractions with POC, PON, and Chl.a, in 4 seasons throughout Harima-Nada of the Seto Inland Sea, Japan, were investigated. A high concentration of PIP was observed not only in the northern coastal area, which received much freshwater discharge, but also in the channel parts. In winter, when Δσt was low, the difference between surface and bottom σt, resuspension of sinking particles or/and surface sediment which has a high PIP/PP ratio seems to have occurred, and then a high concentration of PIP in surface water was observed. In spring and summer, PIP/PP ratios (0.24) of surface waters were close to those of phytoplankton (0.1–0.2). On the other hand, PIP/PP ratios in autumn and winter, when Δσt was low, were similar to those of surface sediment in Harima-Nada (0.32–0.39). SPM in Harima-Nada showed higher PP contents than other coastal environments, and its mean value of 9.10 mg P/g was close to the phytoplankton P content of 9.75 mg P/g. This suggests that SPM in Harima-Nada was strongly affected by phytoplankton. The C/N ratio in Harima-Nada in spring was high (11), although high Chl.a and low PIP/PP were observed, possibly resulting from preferential decomposition of nitrogen in comparison with carbon. We consider that the PIP/PP ratio is a good indicator to characterize SPM and to predict its origin as well as the C/N.     

Photo-inhibition of phytoplankton photosynthesis as a function of exposure time

The photo-inhibition of phytoplankton photosynthesis at higher intensities was examined with a cultured marine diatom,Phaeodactylum tricornutum, and natural samples. The question was to determine whether photo-inhibition results from excretion of photosynthetic products from cell or from an actual decrease in photosynthetic rate. P. tricornutum cultured at 15 klux showed very little photo-inhibition up to 70 klux, and, in the sample cultured at 1 klux, most marked photo-inhibition was observed in 3 hours experiment. Extracellular release was less than 30% of particulate fixation, and did not show any extreme increase to supplement photosynthesis depression at higher light intensities. When the photosynthesis was measured during 10 minutes, both samples showed no photo-inhibition. The photosynthesis by low light sample lost the linearity of time-course with prolonged exposure at high light intensity. Observed photo-inhibition, therefore, we explained with the actual decrease in photosynthetic rate. Similar photo-inhibition could be seen in marine phytoplankton samples concentrated by filtration.     

Seasonal variation in the transport of suspended matter in the East China Sea

Seasonal variation in the transport of suspended matter across the East China Sea is investigated with the use of results of field observations and diagnostic numerical experiments. Suspended matter is transported from the shelf edge to the inner shelf in summer and from the inner shelf to the shelf edge in autumn and winter due to the vertical circulation mainly induced by the monsoon wind. The maximum transport of suspended matter from the inner shelf to the shelf edge occurs in autumn.     

Bidirectional shaking table tests of a low-cost friction sliding system with flat-inclined surfaces

A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.     

Synthesis of highly dense and fine-grained aggregates of mantle composites by vacuum sintering of nano-sized mineral powders

Synthesized mineral powders with particle size of <100 nm are vacuum sintered to obtain highly dense and fine-grained polycrystalline mantle composites: single phase aggregates of forsterite (iron-free), olivine (iron containing), enstatite and diopside; two-phase composites of forsterite + spinel and forsterite + periclase; and, three-phase composites of forsterite + enstatite + diopside. Nano-sized powders of colloidal SiO₂ and highly dispersed Mg(OH)₂ with particle size of ≤50 nm are used as chemical sources for MgO and SiO₂, which are common components for all of the aggregates. These powders are mixed with powders of CaCO₃, MgAl₂O_4, and Fe(CO₂CH₃)₂ to introduce mineral phases of diopside, spinel, and olivine to the aggregates, respectively. To synthesize highly dense composites through pressureless sintering, we find that calcined powders should be composed of particles that have: (1) fully or partially reacted to the desired minerals, (2) a size of <100 nm and (3) less propensity to coalesce. Such calcined powders are cold isostatically pressed and then vacuum sintered. The temperature and duration of the sintering process are tuned to achieve a balance between high density and fine grain size. Highly dense (i.e., porosity ≤1 vol%) polycrystalline mantle mineral composites with grain size of 0.3–1.1 μm are successfully synthesized with this method.     

Total organic carbon and nitrogen contents in surface sediments of Harima Nada,eastern Seto Inland Sea,Japan: a comparison under two different trophic states

Phytoplankton abundance in the surface waters of Harima Nada, eastern Seto Inland Sea of Japan, decreased after around the late 1970s following a reduction of terrestrial phosphorous inputs, and relatively low levels persisted thereafter. This symptom of de-eutrophication in recent decades might have reduced organic matter storage in surficial sediments. To test this possibility, we examined total organic carbon (TOC) and nitrogen (TN) contents of Harima Nada sediments in 2011, and compared the results to past data from more eutrophic states. In 2011, the TOC and TN varied horizontally within the basin, in relation to physicochemical properties (water and mud content) and phytoplankton remnants (pheo-pigments) of the sediments. These horizontal patterns were fundamentally similar to those of the early 1980s (1982–1983), although discrepancies between the periods were observed in some areas. Differences of mean TOC and TN in the 0–2 cm layer at 63 stations from 1982–1983 to 2011 were consequently <10 %. Hence, the recent de-eutrophication in Harima Nada was associated with little overall change of TOC and TN storage in the sediment. In Harima Nada, changes in water clarity and particle size composition of the sediment seem to have occurred during recent decades. The aforementioned paradoxical phenomenon may therefore be explained by factors that are affected by these environmental changes. Such factors include the ratio of export flux to the seafloor to phytoplankton production, phytoplankton biomass and production in the entire euphotic zone, and accumulation rate of surface sediment.     

A new tree-ring date for the “floating island” lava flow,Mount St. Helens,Washington

Anomalously narrow and missing rings in trees 12 m from Mount St. Helens' floating island lava flow, and synchronous growth increases in trees farther from the flow margin, are evidence that this andesitic flow was extruded between late summer 1799 and spring 1800 a.d., within a few months after the eruption of Mount St. Helens' dacitic layer T tephra. For ease of reference, we assign here an 1800 a.d. date to this flow. The new date shows that the start of Mount St. Helens' Goat Rocks eruptive period (1800–1857 a.d.) resembled the recent (1980–1986) activity in both petrochemical trends and timing. In both cases, an initial explosive eruption of dacite was quickly succeeded by the eruption of more mafic lavas; dacite lavas then reappeared during an extended concluding phase of activity. This behavior is consistent with a recently proposed fluid-dynamic model of magma withdrawal from a compositionally zoned magma chamber.     

The baryon clump within an extended dark matter region

As a model of the Lyman absorbing systems of quasar lights, the gravitational equilibrium of a baryon clump within an extended dark matter composed of collisionless particles is examined. There exists the critical mass below the clump is stable. It is highly probable that these baryon clumps may be the Lyman absorbers.Paper presented at the IAU Third Asian-Pacific Regional Meeting, held in Kyoto, Japan, between 30 September–6 October, 1984.