Estimation of snow ablation under a dust layer covering a wide range of albedo

Ablation processes of snow under a thin dust cover are complicated compared with those under a thick cover, mainly owing to the effects of aggregation (redistribution) of dust particles on the conditions of surface melting. Aggregation of dust particles causes the snow surface to brighten after the initial dust configuration, thus affecting the relationship between initial dust concentration and surface albedo. In order to estimate snow ablation rate under a thin dust cover, we used a composite energy balance model in which the surface albedo is taken as a measured input variable. The estimated results of snow ablation agreed reasonably well with the observation, considering the measurement errors inherited in the snow depressions. Comparison of the two cases, that is, one considering the aggregation of dust particles (observation: albedo variable) and the other without aggregation (assumption: albedo constant), showed that the ablation rates were noticeably lower on the former case. This suggests that the aggregation of dust particles induces a reduction of snow ablation. Copyright © 2002 John Wiley & Sons, Ltd.     

Evolution of disk galaxies regulated by supernova remnants

Assuming that a disk galaxy is composed of an ambient pervasive gas, small clouds, molecular clouds and stars, its evolution is studied through examining the interchange processes among them. Main results obtained are: (1) The star formation rate is directed by the formation process of molecular clouds. (2) Depending upon the parameters there may be three or four types of evolution of disk galaxies: the no star formation case, the active in the past and inactive at present star formation case, the burst-like star formation case and the very active in star formation case.Paper presented at the IAU Third Asian-Pacific Regional Meeting, held in Kyoto, Japan between 30 September–6 October, 1984.     

Regional 3-D heterogeneities by waveform inversion – application to the Atlantic area

The waveform inversion method described in Woodhouse & Dziewonski (1984) was modified to retrieve regional scale 3-D heterogeneities by using the minor arc part of seismograms. The lateral heterogeneities are expanded horizontally into blocks (10°× 10°) and radially into Legendre polynomials up to order 3 (0–670 km), and thus the results show much fine details of lateral variation than previous global scale studies. We assumed that the heterogeneities produce the perturbation of eigenfrequencies which are the minor arc average of local eigenfrequency shift. We applied the method to the upper mantle beneath the Atlantic Ocean and its environments. Care was taken about the weighting of the data set. We found that the fit of each seismogram became better when the weighting of each seismogram is proportional to the inverse of initial data residuals. Resolution is good in the triangular region surrounded by South America, Europe, and North America. Resolution is not good in the South Atlantic because of the poor path coverage. Depth resolution is not clear, because of the use of Legendre polynomials, though the results suggest a broad half-width of the order of 200 km or more. We found some similarities between previous global studies and our results. For example, low velocities beneath the East Pacific Rise, Chile Rise and Azores triple junction and a high velocity Canadian shield are obtained. However, there are also differences; the high-velocity zone beneath the Brazilian shield at shallow depth is not a prominent feature in this study. Instead, we found a somewhat unexpected feature near the Romanche and Vema fracture zones where shallow positive anomalies exist. Smoothed results calculated by the spherical harmonic expansion are also shown for the purpose of comparison with global studies.     

Textural variations and impact history of the Millbillillie eucrite

Abstract— We have investigated 10 new specimens of the Millbillillie eucrite to study its textures and mineral compositions by electron probe microanalyser and scanning electron microscope. Although originally described as having fine-grained texture, the new specimens show diversity of texture. The compositions (Mg/Fe ratios) of the host pigeonites and augite lamellae are homogeneous, respectively, in spite of the textural variation. In addition to their chemical homogeneity, pyroxenes in coarse and fine-grained clasts are partly inverted to orthopyroxene. Chemical zoning of plagioclase during crystal growth is preserved. This eucrite includes areas of granulitic breccias and impact melts. Large scale textures show a subparallel layering suggesting incomplete mixing and deposition of impact melt and lithic fragments. An ³⁹Ar-⁴⁰Ar age determination for a coarse-grained clast indicates a strong degassing event at 3.55 ± 0.02 Ga. We conclude that Millbillillie is among the most equilibrated eucrites produced by thermal annealing after impact brecciation. According to the classification of impact breccias, Millbillillie can be classified as a mixture of granulitic breccias and impact melts. The last significant thermal event is characterized by network-like glassy veins that run through clasts and matrices. Consideration of textural observations and requirements for Ar-degassing suggests that the ³⁹Ar-⁴⁰Ar age could in principle date either the earilier brecciation and annealing event or the event which produced the veins.     

CDM potential in the power-generation and energy-intensive industries of China

Reducing emissions from deforestation and forest degradation (REDD+) has emerged as an important carbon governance mechanism. However, forest governance is weak in most REDD+ countries, which undermines efforts to establish REDD+. This study analyses the factors that enable national REDD+ processes in the context of weak governance using a two-step ‘qualitative comparative analysis’ (QCA) of 12 REDD+ countries. Assuming that actor-related factors can be effective only if certain institutional preconditions are met, six factors were divided into two categories that were analysed separately: institutional setting (pressure from forest-resource shortage; forest legislation, policy, and governance; already initiated policy change) and the policy arena (national ownership; transformational coalitions; inclusiveness of the policy process). The factors were analysed to determine their role in efforts to establish comprehensive REDD+ policies that target transformational change. The results reveal path dependencies and institutional stickiness in all the study countries. Only countries already undertaking institutional change have been able to establish REDD+ policies in a relatively short period – but only in the presence of either high pressure from forest-resource shortages or key features of effective forest legislation, policy, and governance. Furthermore, where an enabling institutional setting is in place, the policy arena conditions of national ownership and transformational coalitions are crucial.Policy relevance Although the aim of REDD+ is to provide performance-based payments for emissions reductions, the outcomes in terms of actual emission reductions or co-benefits are not yet observable. Most REDD+ countries are still at the design and implementation stage for policies and measures. Indicators and criteria to measure progress in this phase are required to identify which factors enable or hinder countries' performance in delivering necessary policy change to provide targeted financial incentives to support countries' efforts. This study analyses the factors that shape national REDD+ processes in the context of weak governance using a two-step QCA of 12 REDD+ countries. The results show a set of enabling conditions and characteristics of the policy process under which REDD+ policies can be established. These findings may help guide other countries seeking to formulate REDD+ policies that are likely to deliver efficient, effective, and equitable outcomes.     

An anomalous eucrite,Dhofar 007, and a possible genetic relationship with mesosiderites

Abstract— We studied the texture, mineralogy, and bulk chemical composition of Dhofar 007, a basaltic achondrite. Dhofar 007 is a polymict breccia that is mostly composed of coarse‐grained granular (CG) clasts with a minor amount of xenolithic components, such as a fragment of Mg‐rich pyroxene. The coarse‐grained, relict gabbroic texture, mineral chemistry, and bulk chemical data of the coarse‐grained clast indicate that the CG clasts were originally a cumulate rock crystallized in a crust of the parent body. However, in contrast to monomict eucrites, the siderophile elements are highly enriched and could have been introduced by impact events. Dhofar 007 appears to have experienced a two‐stage postcrystallization thermal history: rapid cooling at high temperatures and slow cooling at lower temperatures. The presence of pigeonite with closely spaced, fine augite lamellae suggests that this rock was cooled rapidly from higher temperatures (>0.5 °C/yr at ˜1000 °C) than typical cumulate eucrites. However, the presence of the cloudy zone in taenite and the Ni profile across the kamacite‐taenite boundaries indicates that the cooling rate was very slow at lower temperatures (˜1–10 °C/Myr at <600–700 °C). The slow cooling rate is comparable to those in mesosiderites and pallasites. The two‐stage thermal history and the relative abundance of siderophile elements similar to those for metallic portions in mesosiderites suggest that Dhofar 007 is a large inclusion of mesosiderite. However, we cannot rule out a possibility that Dhofar 007 is an anomalous eucrite.     

Application of fiber optics for deep-sea exploration systems

Optical fibers, optical transmission systems, and optical Accessories to apply fiber optics to deep-sea exploration systems are described. The discussion of fibers cover the construction of the fiber and cable and the useful life of optical fibers. Considerations in designing a system (number of fibers and multiplexing method) are discussed. Accessories such as optical feedthroughs, optical connectors, and optical rotary connectors are examined. A composite fiber-optic/coaxial cable system successfully operated for one year is described     

Interaction of intergalactic-gas flow with a rigid-body,spheroidal galaxy

The interaction of intergalactic-gas flow, which is assumed to be an incompressible fluid, with a rigid-body, spheroidal galaxy is examined analytically. The gas-flow patterns, the distributions of pressure at the surface of galaxy and some other quantities are calculated for the cases with and without viscosity. By use of results, we discuss the formation of HI ridges, trailing clouds and gas streams accompanying with galaxies, and the bending (or warping) of intersteller gas observed in spiral galaxies are analyzed. Some discussion on the Magellanic Stream is given.     

An empirical model for transient crater growth in granular targets based on direct observations

The present paper describes observations of crater growth up to the time of transient crater formation and presents a new empirical model for transient crater growth as a function of time. Polycarbonate projectiles were impacted vertically into soda-lime glass sphere targets using a single-stage light-gas gun. Using a new technique with a laser sheet illuminating the target [Barnouin-Jha, O.S., Yamamoto, S., Toriumi, T., Sugita, S., Matsui, T., 2007. Non-intrusive measurements of the crater growth. Icarus, 188, 506-521], we measured the temporal change in diameter of crater cavities (diameter growth). The rate of increase in diameter at early times follows a power law relation, but the data at later times (before the end of transient crater formation) deviates from the power law relation. In addition, the power law exponent at early times and the degree of deviation from a power law at later times depend on the target. In order to interpret these features, we proposed to modify Maxwell’s Z-model under the assumption that the strength of the excavation flow field decreases exponentially with time. We also derived a diameter growth model as: d(t)∝[1-exp(-βt)]^γ, where d(t) is the apparent diameter of the crater cavity at time t after impact, and β and γ are constants. We demonstrated that the diameter growth model could represent well the experimental data for various targets with different target material properties, such as porosity or angle of repose. We also investigated the diameter growth for a dry sand target, which has been used to formulate previous scaling relations. The obtained results showed that the dry sand target has larger degree of deviation from a power law, indicating that the target material properties of the dry sand target have a significant effect on diameter growth, especially at later times. This may suggest that the previously reported scaling relations should be reexamined in order to account for the late-stage behavior with the effect of target material properties.