GIS analysis of cirques on Vestfirðir,northwest Iceland: implications for palaeoclimate

This study presents the first regional analysis of cirques on Vestfirðir, NW Iceland, using a Geographical Information System (GIS). The length, width, elevation of cirque‐floor, latitude and the distance to the modern coastline (both ocean and fjord coastlines) of cirques were quantified using ArcGIS. The topographical analysis revealed a total of 100 cirques on western and northern Vestfirðir. Several additional cirques are present, but they had poorly defined toewalls, making the cirque‐floor difficult to identify. Mean cirque length is 515 m and mean cirque width is 752 m. The modal orientation of the aspect of cirques is northeast, with a strong secondary mode to the northwest. Cirques at low elevations are more abundant close to the ocean, whereas cirques further from the ocean are present at high elevations. Three techniques were used to reconstruct past equilibrium‐line altitudes (ELAs) of cirque glaciers: the cirque‐floor method, the altitude‐ratio method and the accumulation‐area ratio method. The largest range of past ELAs is generated from the cirque‐floor method with values from 40 up to 730 m. Mean past ELA values range from ～395 to 423 m depending on the method used to reconstruct former ELAs. A strong positive relationship is observed between past ELA values and distance to the ocean demonstrating the importance of access to a moisture source for glacier survival. This relationship is stronger than the relationship between former ELAs and latitude. Based on the small size of cirque glaciers, it is likely that even minor fluctuations in the Irminger Current and the East Greenland Current influence cirque glaciation on Vestfirðir.     

Multiple re‐advances of a Lake Vättern outlet glacier during Fennoscandian Ice Sheet retreat,south‐central Sweden

Lake Vättern represents a critical region geographically and dynamically in the deglaciation of the Fennoscandian Ice Sheet. The outlet glacier that occupied the basin and its behaviour during ice‐sheet retreat were key to the development and drainage of the Baltic Ice Lake, dammed just west of the basin, yet its geometry, extent, thickness, margin dynamics, timing and sensitivity to regional retreat forcing are rather poorly known. The submerged sediment archives of Lake Vättern represent a missing component of the regional Swedish deglaciation history. Newly collected geophysical data, including high‐resolution multibeam bathymetry of the lake floor and seismic reflection profiles of southern Lake Vättern, are used here together with a unique 74‐m sediment record recently acquired by drill coring, and with onshore LiDAR‐based geomorphological analysis, to investigate the deglacial environments and dynamics in the basin and its terrestrial environs. Five stratigraphical units comprise a thick subglacial package attributed to the last glacial period (and probably earlier), and an overlying >120‐m deglacial sequence. Three distinct retreat–re‐advance episodes occurred in southern Lake Vättern between the initial deglaciation and the Younger Dryas. In the most recent of these, ice overrode proglacial lake sediments and re‐advanced from north of Visingsö to the southern reaches of the lake, where ice up to 400 m thick encroached on land in a lobate fashion, moulding crag‐and‐tail lineations and depositing till above earlier glacifluvial sediments. This event precedes the Younger Dryas, which our data reveal was probably restricted to north‐central sectors of the basin. These dynamics, and their position within the regional retreat chronology, indicate a highly active ice margin during deglaciation, with retreat rates on average 175 m a^?1. The pronounced topography of the Vättern basin and its deep proglacial‐dammed lake are likely to have encouraged the dynamic behaviour of this major Fennoscandian outlet glacier.     

Sequential Separation of Uranium,Hafnium and Neodymium from Natural Waters Concentrated by Iron Coprecipitation

A new ion exchange chromatography method is presented for the isolation of high field‐strength elements (HFSE) from freshwater and seawater samples that have undergone iron coprecipitation. Large volumes of water can be condensed through the application of iron coprecipitation, but clean separation of elements from the precipitate proves difficult. The technique described is a five‐column process designed to separate the HFSE, including rare earth elements such as neodymium and hafnium, before removing the iron and isolating uranium. Subsequent isolation of Nd and Hf was achieved using established ion exchange chromatography methods. The efficacy of our chemistry was verified by measurements of analytical reference materials – both reference solutions and seawater samples – subjected to the chemical separation methods described. Elution results indicate high yields (> 90%) determined by concentration measurements of a known reference material added to each column. Measurement results for isotopic compositions of seawater (U, Nd) and reference solutions (NIST SRM 960, U) were identical within uncertainty to previously published values. Compositions were identical between solutions (Spex CLMS3, Spex PLND2) that underwent different iron coprecipitation procedures. Isotopic determinations for reference materials JNdi‐1 and NIST SRM 960 measured with the mass spectrometers used in this study were in agreement with universally accepted values for these materials, and indicate high precision.     

NMR relaxation measurements of biofouling in model and geological porous media

Recently 2D nuclear magnetic resonance (NMR) relaxation techniques have been able to access changes in pore structures through surface and diffusion based relaxation measurements. This research investigates the applicability of these methods for measuring pore and surface changes due to biofilm growth in various model porous systems and natural geological media. Model bead packs of various construction containing 100 μm borosilicate and soda lime glass beads were used to demonstrate how changes in the measured relaxation rates can be used to non-invasively verify and quantify biofilm growth in porous media. However significant challenges are shown to arise when trying to implement the same techniques to verify biofilm growth in a natural geological media.     

Climate-change impacts on sagebrush habitat and West Nile virus transmission risk and conservation implications for greater sage-grouse

Greater sage-grouse (Centrocercus urophasianus) are threatened by loss of sagebrush habitat and the spread of West Nile virus throughout much of their range in North America; yet, future impacts of climate change on these potential stressors have not been addressed. Here, we aim to quantify the potential impacts of climate change on the distribution of climatically suitable habitat for sagebrush and on transmission risk for West Nile virus in the eastern portion of the species’ range. We used Maxent to model the current and future climatically suitable habitat for two dominant sagebrush species in the study area, and we used a degree-day model to predict future West Nile virus transmission risk under likely climate-change scenarios. Our models suggest that areas with the highest future suitability for sagebrush habitat will be found in southwestern Wyoming and north-central Montana. The degree-day model suggests that greater sage-grouse in western portions of the study area, which are generally higher in elevation than where West Nile virus currently occurs, will see increasing risk of transmission in the future. We developed a spatially explicit map of suggested management actions based on our predictions that will aid in conservation of the species into the coming decades.     

Can One-Run-Fixed-Arrhenius Kerogen Analysis Provide Comparable Organofacies Results to Detailed Palynological Analysis? A Case Study from a Prospective Mississippian Source Rock Reservoir (Bowland Shale,UK)

Natural Resources Research - Organofacies analysis, a fundamental component within source rock appraisal based on the study of kerogen within a source rock, is typically produced from microscopy...     

A tenuous triumvirate: The role of independent biologists in Chile's co-management regime for shellfish

Fisheries co-management is usually defined by shared decision-making between fishers and the state. Chile's co-management regime for shellfish differs from the norm by incorporating a third party: independent biological consultants. This paper evaluates Chile's system and compares three-party co-management to two-party systems. It finds that consultants fulfill functions absent in two-party co-management, such as playing an intermediary role between fishers and the state, and also perform certain functions better than either of the other two entities involved, such as acting as a credible and objective source of information. It then discusses ways to perfect Chile's system, such as stepping up knowledge transfer activities so as to further empower fishers.     

40Ar-39Ar and Rb-Sr geochronology of high-pressure metamorphism and exhumation history of the Tavsanli Zone, NW Turkey

Geochronological investigations in high- and ultra-high-pressure metamorphic rocks are problematic since firstly the low temperatures lead to fine grain size and disequilibrium assemblages, and secondly the problem of “excess argon” affects ⁴⁰Ar-³⁹Ar systematics, the most commonly used isotopic system. The Tavsanli Zone is a belt of high-pressure low-temperature (HP-LT) rocks spanning NW Turkey and is one such region where previous geochronological studies have produced a range of estimates for the age of HP-LT metamorphism, raising the question of whether they are geologically significant. This study presents new data from the Tavsanli Zone; ⁴⁰Ar-³⁹Ar ages are in the range 60 Ma to 175 Ma, whilst Rb-Sr ages are restricted to 79.7 Ma to 82.8 Ma, confirming the presence of excess argon. Detailed ultra-violet laser ablation microprobe (UVLAMP) studies have revealed younger ⁴⁰Ar-³⁹Ar ages in the cores of coarser white micas, which in conjunction with ⁴⁰Ar-³⁹Ar ages from the finest grained lithologies and the Rb-Sr white mica crystallisation ages, constrain the post-HP-LT metamorphism exhumation rates of these rocks. Petrological and regional constraints suggest that syn-subduction exhumation and cooling took place initially by synchronous subduction and exhumation by underplating. This is followed by a phase of syn-continent-continent collision at a rate of approximately 1.5 mma⁻¹ and exhumation to the surface via thrusting. The ⁴⁰Ar-³⁹Ar hornblende data from a granodiorite intruding the HP-LT rocks constrain the later parts of exhumation path. This study highlights the importance of a multi-system geochronological approach when attempting to determine the history of HP-LT rocks. Received: 12 May 1998 / Accepted: 21 April 1999     

Buckling and postbuckling of composite ship panels stiffened with preform frames

The U.S. shipbuilding industry recently has started incorporating composite materials in the construction of both military and commercial ships due to the advantages of composite construction. These advantages include the reduction in total life costs, corrosion resistance, high strength- and stiffness-to-weight ratios, and improved stealth for military applications. One disadvantage is the higher costs of composites compared to steel and other conventional materials. Therefore, new higher quality materials with lower costs and new fabrication methods need to be developed before composite materials will be fully accepted for the construction of large ships. A new composite preform framing technology shows promise in the reduction of fabrication costs for large ship construction. There already has been significant cost savings using this framing technology in the construction of small recreational boats and large yachts. This framing technology involves casting a dry glass fiber-reinforced plastic (GRP) fabric into shape in a closed mold with a foam core. One unresolved issue using this framing technology is the orientation of the fiber for the frames. This paper summarizes experimental results of the testing of composite panels stiffened with preform frames under in-plane uniaxial compressive loads. Biaxial (0,90), quadaxial (0,90,+45,−45), and triaxial (+45,−45,0) laminates were used in the frames.