Climatic signals in lacustrine deposits of the Upper Yacoraite Formation,Western Argentina: Evidence from clay minerals,analcime, dolomite and fibrous calcite

Authigenic clays are an important control on reservoir quality in lacustrine carbonates but remain challenging to predict. Lacustrine depositional systems respond to climatic variations in rainfall, surface runoff and groundwater input, and evaporation, and result in rapid and frequent changes in lake volume; this is expressed through changing water depth and shoreline position. In the upper portion of the Early Palaeocene Yacoraite Formation of the Salta Basin in Argentina, extensive lacustrine deposits were deposited during the sag phase of rifting. Prior high-resolution stratigraphic studies have suggested that climatic factors control microbial carbonate sequences within a ‘balanced fill’ lake, with variation in the lake level having a major influence on facies association changes. This study characterizes the evolution of facies and mineralogy within the Yacoraite Formation, focusing on the distribution of clay minerals, making a link between the high, medium and low-frequency sequence stratigraphic cycles. The low-frequency transgressive hemicycle of the upper portion of the Yacoraite Formation is comprised of abundant siliciclastic facies, suggesting a wetter period. Microbialites occurring in this interval are coarse-grained and agglutinated. Detrital clay minerals such as illite and chlorite and associated siliciclastic sediments were input to the lake during high-frequency transgressive periods. During high-frequency regressive hemicycles, sedimentation was dominated by carbonate facies with Ca-rich dolomite and the authigenic clays are comprised of chlorite/smectite mixed-layers. By contrast, the low frequency regressive hemicycle records fine-grained agglutinated microbialite with horizons of fibrous calcite, more stoichiometric dolomite, barite and authigenic magnesian smectite. This indicates elevated ion concentrations in the lake under intense evaporation during an arid period. Understanding the conditions that are favourable for formation and preservation of authigenic clays within the lacustrine environment can improve understanding of reservoir quality in comparable economically important deposits.     

The recognition of former melt flux through high‐strain zones

High‐strain zones are potential pathways of melt migration through the crust. However, the identification of melt‐present high‐strain deformation is commonly limited to cases where the interpreted volume of melt “frozen” within the high‐strain zone is high (>10%). In this contribution, we examine high‐strain zones in the Pembroke Granulite, an otherwise low‐strain outcrop of volcanic arc lower crust exposed in Fiordland, New Zealand. These high‐strain zones display compositional layering, flaser‐shaped mineral grains, and closely spaced foliation planes indicative of high‐strain deformation. Asymmetric leucosome surrounding peritectic garnet grains suggest deformation was synchronous with minor amounts of in situ partial melting. High‐strain zones lack typical mylonite microstructures and instead display typical equilibrium microstructures, such as straight grain boundaries, 120° triple junctions, and subhedral grain shapes. We identify five key microstructures indicative of the former presence of melt within the high‐strain zones: (a) small dihedral angles of interstitial phases; (b) elongate interstitial grains; (c) small aggregates of quartz grains with xenomorphic plagioclase grains connected in three dimensions; (d) fine‐grained, K‐feldspar bearing, multiphase aggregates with or without augite rims; and (e) mm‐ to cm‐scale felsic dykelets. Preservation of key microstructures indicates that deformation ceased as conditions crossed the solidus, breaking the positive feedback loop between deformation and the presence of melt. We propose that microstructures indicative of the former presence of melt, such as the five identified above, may be used as a tool for recognising rocks formed during melt‐present high‐strain deformation where low (<5%) volumes of leucosome are “frozen” within the high‐strain zone.     

Shellfish as the impetus for embayment management

Concern about declining stocks of municipally managed shellfish species in Orleans, Massachusetts, led to several shellfish enhancement programs. Projects included bottom and raft culture of hatchery-raised seed, hatchery and upweller techniques, transplants of seed and adult shellfish, and other management options. However, deterioration of water quality and habitat prompted the town to initiate a multifaceted program to address the issues causing environmental degradation. A water-quality task force, appointed to determine solutions to the problems, recommended changes in land-use practices. A drainage remediation program was undertaken at five sites, resulting in the reopening of a viable shellfish area for the first time in 12 yr. Issues concerning nutrient enrichment, groundwater flow and depth, flushing characteristics of the embayments, proliferation of private docks and piers in the public tidelands, effect of barrier beach dynamics including erosion control measures, and the number of users and diversity of their activies employed on the waters themselves will be addressed in current municipal planning initiatives.     

Brittle-plastic deformation in initially dry rocks at fluid-present conditions: transient behaviour of feldspar at mid-crustal levels

We present detailed microstructural and chemical analyses from an initially dry anorthositic rock deformed during wet amphibolite facies conditions. Three different domains representing the microstructural variation of the deformed samples are investigated in detail in terms of fracture morphology and mode, grain characteristics and chemistry of present phases. Results show transient deformational behaviour where a close interaction between brittle, plastic and fluid-assisted deformation mechanisms can be observed. Our analysis allows us to describe the succession, interrelationships and effects of active mechanisms with progressively increasing strain in three so-called stages. In Stage 1, initial fracturing along cleavage planes promoted fluid influx that caused fragmentation and chemical reactions, producing fine-grained mineral assemblages in the fractures. Deformation twins and dislocations developed in clast pieces due to stress relaxation. Passive rotation of conjugate fracture sets and interconnection of intracrystalline fractures formed micro-shear-zones, constituting Stage 2. Microstructures and grain relationships indicate the activity and fluctuation between fracturing, dissolution-precipitation creep, grain boundary sliding and locally dislocation creep, reflecting the transient behaviour of brittle and plastic deformation mechanisms. Further rotation and widening of fractures into overall foliation parallel shear-bands (Stage 3) promoted strain partitioning into these areas through increased fluid influx, influence of fluid-assisted grain boundary sliding, phase mixing and presence of weak phases such as white mica. We suggest that local differences in fluid availability, volume fraction of weak phases produced by fluid present metamorphic reactions coupled with volume increase and local variations in stress concentration induced transient brittle-plastic behaviour. The studied shear-zone represents an example of the transformation of a rigid dry rock to a soft wet rock during deformation through syntectonic fracturing.     

Ultrahigh temperature deformation microstructures in felsic granulites of the Napier Complex, Antarctica

Detailed electron microscope and microstructural analysis of two ultrahigh temperature felsic granulites from Tonagh Island, Napier Complex, Antarctica show deformation microstructures produced at  1000 °C at 8–10 kbar. High temperature orthopyroxene (Al 7 wt.% and  11 wt.%), exhibits crystallographic preferred orientation (CPO) and frequent subgrain boundaries which point to dislocation creep as the dominating deformation mechanism within opx. Two different main slip systems are observed: in opx bands with exclusively opx grains containing subgrain boundaries with traces parallel to [010] and a strong coupling of low angle misorientations (2.5°–5°) with rotation axes parallel to [010] the dominating slip system is (100)[001]. Isolated opx grains and grain clusters of 2–5 grains embedded in a qtz–fsp matrix show an additional slip system of (010)[001]. The latter slip system is harder to activate. We suggest that differences in the activation of these slip systems is a result of higher differential stresses imposed onto the isolated opx grains and grain clusters. In contrast to opx, large qtz grains (up to 200 μm) show random crystallographic orientation. This together with their elongate and cuspate shape and the lack of systematic in the rotation axes associated with the subgrain boundaries is consistent with diffusion creep as the primary deformation mechanism in quartz.Our first time detailed microstructural observations of ultrahigh temperature and medium to high pressure granulites and their interpretation in terms of active deformation mechanisms give some insight into the type of rheology that can be expect at lower crustal conditions. If qtz is the mineral phase governing the rock rheology, Newtonian flow behaviour is expected and only low differential stress can be supported. However, if the stress supporting mineral phase is opx, the flow law resulting from dislocation creep will govern the rheology of the rock unit; hence, an exponential relationship between stress and strain rate is to be expected.     

Metals in tidal flats colonized by microbial mats within a South-American estuary (Argentina)

In this study, we measured the concentrations of metals (Cd, Cu, Pb, Ni, Cr, Zn, Hg, Mn, and Fe) and assessed the characteristics of tidal flats (grain size and organic matter content) in sediments and their overlying microbial mats fractions to evaluate the anthropogenic impact within the Bahía Blanca Estuary (BBE). Puerto Rosales (PR) and Almirante Brown (AB), located in the middle and inner zone of the estuary, respectively, were used as sampling sites. Sediments were composed mainly of silt–clay in AB, whereas first fine-grained particles were coarser in depth in PR. Regarding the concentration of metals in both fractions, we found differences between sites: There were higher concentrations of overall metals in AB relative to PR. In addition, higher concentrations of Cu were recorded in the first centimeters of AB tidal flats, whereas higher concentration of Cd were recorded in microbial mats of PR. Considering that the grain size was similar between sites, these results are consistent with the high concentration of organic matter found in AB, probably because this site is close to a former municipal dump and sewage discharges. Also, the higher Cd content found in PR site would highlight both the influence of untreated urban discharges and port anthropogenic activities. In conclusion, this study allowed identifying high values of some metals in the presence of microbial mats in the BBE, thus suggesting a possible interaction between both, at least for metals like Cu or Cd.     

Very high resolution rainfall patterns measured by TRMM precipitation radar: seasonal and diurnal cycles

The TRMM Precipitation Radar is used to construct a high resolution (0.05°?×?0.05°) climatology of rainfall over the latitude band extending to about 36° North and South. This study describes climatological patterns of rainfall frequency and intensity at high spatial resolution, with special focus on the seasonal and diurnal cycles in the frequency of rainfall events. We use this Tropics-wide dataset to highlight small-scale precipitation features that are too fine to be captured by the most widely used satellite-based rainfall datasets. The results shed light on the roles of changes in the wind direction, the land-sea thermal contrast, small-scale variations in sea surface temperature, and orography in shaping the seasonal and diurnal cycles of rainfall. In some regions of the tropics, diurnally locked local circulations are largely responsible for sharp gradients in the spatial distribution of seasonal mean precipitation. In other regions, we show that climatological rainfall frequency changes very sharply at coastlines, even though rainfall in these regions is expected to be controlled by relatively large scale weather systems.     

An upgraded version of the Eta model

Upgrades implemented over a number of years in an open source version of the Eta model, posted at the CPTEC web site http://etamodel.cptec.inpe.br/, are summarized and examples of benefits are shown. The version originates from the NCEP’s Workstation Eta code posted on the NCEP web site http://www.emc.ncep.noaa.gov/mmb/wrkstn_eta, which differs from the NCEP’s latest operational Eta by having the WRF-NMM nonhydrostatic option included. Most of the upgrades made resulted from attention paid to less than satisfactory performance noted in several Eta results, and identification of the reasons for the problem. Others came from simple expectation that including a feature that is physically justified but is missing in the code should help. The most notable of the upgrades are the introduction of the so-called sloping steps, or discretized shaved cells topography; piecewise-linear finite-volume vertical advection of dynamic variables; vapor and hydrometeor loading in the hydrostatic equation, and changes aimed at refining the convection schemes available in the Eta. Several other modifications have to do with the calculation of exchange coefficients, conservation in the vertical diffusion, and diagnostic calculation of 10-m winds. Several examples showing improved performance resulting from the dynamics changes are given. One includes a case of unrealistically low temperatures in several mountain basins generated by a centered vertical advection difference scheme’s unphysical advection from below ground, removed by its replacement with a finite-volume scheme. Another is that of increased katabatic winds in the Terra Nova Bay Antarctica region. Successful forecast of the severe downslope zonda wind case in the lee of the highest peaks of the Andes is also shown, and some of the recent successful verification results of the use of the upgraded model are pointed out. The code is used at numerous places, and along with setup information it is available for outside users at the CPTEC Eta web site given above.     

Are cultural heritage and resources threatened by climate change? A systematic literature review

Climate change poses serious threats to the protection and preservation of cultural heritage and resources. Despite a high level of scholarly interest in climate change impacts on natural and socio-economic systems, a comprehensive understanding of the impacts of climate change on cultural heritage and resources across various continents and disciplines is noticeably absent from the literature. To address this gap, we conducted a systematic literature review methodology to identify and characterize the state of knowledge and how the cultural heritage and resources at risk from climate change are being explored globally. Results from 124 reviewed publications show that scholarly interest in the topic is increasing, employs a wide range of research methods, and represents diverse natural and social science disciplines. Despite such increasing and diverse interest in climate change and cultural heritage and resources, the geographic scope of research is limited (predominantly European focused). Additionally, we identified the need for future studies that not only focuses on efficient, sustainable adaptation planning options but also documents if, and how, the implementation of cultural heritage and resources adaptation or preservation is taking place. This systematic literature review can help direct scholarly research in climate change and cultural heritage and resource area. Ultimately, we hope these new directions can influence policy-making for preservation and adaptation of cultural heritage and cultural resources globally.     

0.99999999 confidence ambiguity resolution with GPS and Galileo

In this short contribution it is demonstrated how integer carrier phase cycle ambiguity resolution will perform in near future, when the US GPS gets modernized and the European Galileo becomes operational. The capability of ambiguity resolution is analyzed in the context of precise differential positioning over short, medium and long distances. Starting from dual-frequency operation with GPS at present, particularly augmenting the number of satellites turns out to have beneficial consequences on the capability of correctly resolving the ambiguities. With a 'double' constellation, on short baselines, the confidence of the integer ambiguity solution increases to a level of 0.99999999 or beyond. Electronic Publication