Investigation of dynamic response of masonry minaret structures

Almost all historical minarets in Turkey were constructed using cut stone, masonry blocks or combination of these two materials. The structural and geometrical properties of each masonry minaret, or slender tower structure, depend on many factors including the structural knowledge and applications at the time of construction, experience of the architect or engineer, seismicity of the region, and availability of construction materials in that area. Recent earthquakes in Turkey have shown that most masonry minarets in high seismic regions are vulnerable to structural damage and collapse. In this study, in order to investigate the dynamic behavior of historical unreinforced masonry minarets, three representative minarets with 20, 25, and 30 m height were modeled and analyzed using two ground motions recorded during the 1999 Kocaeli and Duzce, Turkey earthquakes. The modal analyses of the models have shown that the structural periods and the overall structural response are influenced by the minaret height and spectral characteristics of the input motion. The dynamic displacement and axial stress time histories are computed at the critical points on the minarets. During recent earthquakes, most minaret failures occurred above the base of the structure. Consistent with the observed response, the largest stresses were calculated at the same location.     

A new model for analyzing nonlinear torsion behavior of concrete filled steel tube columns with rectangular section

An experimental study on concrete filled steel tube columns with rectangular section subjected to compressionflexure-torsion combined action has been carried out. The failure modes and load-deformation hysteretic relations were obtained. Based on the principles of classical material mechanics, the relations between the torsion curvature of the section and the shear strain of the fiber on the section were established. Then the strain distribution on the rectangular section of concrete filled steel tube columns subjected to torsion was analyzed. The three-dimensional refined finite element model was also built, in order to make the precision verification. The matrix forms of the relation between the torsion curvature of the section and the shear strain of the fiber on the section were derived, and introduced into the fiber beam model considering nonlinear torsion effect on the section. The comparison between test results and calculation results showed that the fiber beam model considering nonlinear torsion effect had high modeling efficiency and solution precision for predicting the torsion behavior of concrete filled steel tube columns with rectangular sections, and was suitable for analyzing the dynamic response of various structures subjected to the combined cyclic load caused by the earthquake load.     

PML solution of longitudinal wave propagation in heterogeneous media

This paper describes the development of a model for unbounded heterogeneous domains with radiation damping produced by an unphysical wave absorbing layer. The Perfectly Matched Layer (PML) approach is used along with a displacement-based finite element. The heterogeneous model is validated using the closed-form solution of a benchmark problem: a free rod with two-part modulus subjected to a specified time history. Both elastically supported and unsupported semi-infinite rods with different degrees of inhomogeneity and loading are considered. Numerical results illustrate the effects of inhomogeneity on the response and are compared with those for equivalent homogeneous domains. The effects of characteristic features of the inhomogeneous problem, presence of local maxima and cut-off frequency are determined. A degenerate case of a homogeneous semi-infinite rod on elastic foundations is produced by tending the magnitude of the foundation stiffness to zero. The response of the latter is compared with that of a free rod. The importance of proper selection of the PML parameters to highly accurate and efficient results is demonstrated by example problems.     

Delineation of Rajmahal basaltic flows,inter-trappeans and associated coal layers using Audio-magneto-telluric method

The extensive volcanic activity of Rajmahal occurred during early Cretaceous (~117 Ma). Potentially perspective Gondawana sediments containing coal seam is partially covered by these basalts. Basalts as well as coal are already known to be of immense economic importance over Rajmahal traps. The present study mainly deals with delineation of basaltic lava flows and associated coal layers using the Audio-magneto-telluric (AMT) study in the south central region of Rajmahal traps near Suri, West Bengal, India. Initially, the field situations have been simulated using forward model with top alluvium cover followed by basaltic lava flows, a wedge shaped inter-trappean sedimentary formation with second basaltic lava flows and basement at the bottom. The model was constrained using available litholog. The model study reveals the presence of moderately resistive basalts, relatively conductive inter-trappeans and the basement, except the top alluvium layer and thin inter-trappeans. Subsequently, threeAMT sounding have been carried out over Cholaguria, Hatgacha and Pachami, Suri, West Bengal. The field AMT study reveals three basaltic lava flows with varying thickness from ~40m to ~350m and composite thickness of ~620m to ~640m, which match well with the published borehole litholog. The inter-trappeans have been identified at 500m to 620m, 310m to 400m and 500m to 640m depths over Cholaguria, Hatgacha and Pachami, respectively. It is interesting to mention that the identified inter-trappeans are inferred to be coal/shaly-coal which are matching very well with the published borehole lithologs.     

On Data Interpolation at Three Croatian Repeat Stations by Using the Spherical Elementary Currents Systems Method

A general mathematical tool for expanding vector systems on a sphere into basis functions, spherical elementary current system (SECS) method, was applied for separation of the geomagnetic field variations into external and internal parts, over a limited region of central and southeastern Europe. The registered variations at three Croatian repeat stations were compared to the variations estimated by the SECS method using the variations from the different sets of observatories. The results of the SECS method were also compared to a simple assumption that the variations at repeat station are equal to those at particular observatory. The relevance of this comparison was to get an insight about the possibility of using the SECS method for estimating the geomagnetic field variations over Croatia. The guidelines for the application of the SECS method for the purpose of reducing repeat station data were also given.     

Regional variations in electricity demand elasticities: The situation in the Central United States

Within the sizable literature on electricity demand relatively little attention is given to regional variations in electricity demand elasticities. This paper investigates 39 electric utility companies having a total of 93 separate operating regions in order to assess the nature of regional electricity demand elasticity variations. Residential, commercial, and industrial demand functions are estimated for each operating region using a flow adjustment model of demand. The resulting electricity price, measure of economic activity, and natural gas price elasticities vary regionally, but not in a systematic manner. The demand elasticities found in each sector range from highly inelastic to highly elastic with the pattern of elasticity variations exhibiting few spatial trends or relationships. Comparisons between operating region results and more aggregated statewide results indicate that statewide and national analysis of electricity demand masks much regional detail — a result which has important implications for energy policy making.     

Carbon dioxide emission reduction quota allocation study on Chinese provinces based on two-stage Shapley information entropy model

Chinese central government made a commitment to achieve a 40–45% reduction in carbon dioxide (CO₂) per unit of GDP by 2020 compared with 2005. This targeted reduction was allocated averagely among all the provinces rather than individually according to different situations of each province. Though some research has been done regarding this rough allocation, two shortcomings in previous studies exist: Firstly, CO₂ marginal abatement cost (MAC) has been ignored as one of the CO₂ emission reduction allocation indexes. Secondly, either subjective or objective method has been used rather than comprehensively of both subjective and objective method to calculate the weight of each index in the previous studies. In order to fill the gaps, this paper builds a two-stage Shapley information entropy model to allocate CO₂ emission reduction quota among the Chinese provinces based on the equity and efficiency principles. Afterward, three CO₂ emission reduction quota allocation scenarios have been proposed. The results show that the CO₂ MAC is an indispensable index in CO₂ emission reduction quota allocation, because its value of CO₂ Shapley information entropy is the highest among five indexes. CO₂ emission reduction quota of lower-MAC provinces should be allocated larger, while the quota of higher-MAC provinces should be allocated smaller. Therefore, two suggested policies have been proposed: First, differential CO₂ emission reduction quota allocation should be proposed. Second, synergetic development should be promoted.     

Influence of food web structure on the biochemical composition of seston,zooplankton and recently deposited sediment in experimental freshwater mesocosms

The effects of food web structure on the quantity and biochemical composition of seston, zooplankton and recently deposited sediment in experimental freshwater mesocosms were examined. Food web structure was manipulated by addition of zooplanktivorous fish. Biochemical characterisations were carried out using lipid biomarkers (sterols, fatty acids, chlorophyll-derived compounds and long-chain alkanediols). Fish addition decreased zooplankton biomass and increased seston biomass and deposited sediment through a trophic cascade. Fish presence strongly influenced the biochemical characteristics of seston and sediment. In contrast, food web structure had a minor impact on the lipid biomarker composition of zooplankton. Although the relative abundance of sterols in the different compartments did not differ strongly between treatments, sterol profiles in seston and sediment depended on food web structure. The predominance of Δ⁷-sterols in seston and sediment in the fish treatment indicated a major contribution of Chlorophyceae. In contrast, the distribution of sterols in seston and sediment in the fishless treatment, dominated by cholesterol, indicated a major zooplanktonic input. The distribution of fatty acids and the relative abundance of chlorophyll-derived compounds and long-chain alkanediols agreed with the predominant contribution of phytoplankton or zooplankton to seston and sediment in the two treatments. The relative abundance of bacterial biomarkers suggested that the contribution of bacteria was rather low. The high relative abundance of polyunsaturated fatty acids (PUFAs) and the absence of stanols in sediments suggested low microbial reworking of organic matter in the recently accumulated sediments. The trophic cascade, generated by the addition of fish, increased the relative abundance of PUFAs in deposited organic matter, thus enhancing sediment quality and potential degradability.     

The influence of volcanological and sedimentological processes on diamond grade distribution in kimberlites: examples from the EKATI Diamond Mine,NWT, Canada

The distribution of diamonds within individual kimberlite pipes is poorly documented in the public domain due to the proprietary nature of the data. The study of the diamond distribution within two pipes, Fox and Koala, from the EKATI Diamond Mine, NWT, Canada, in conjunction with detailed facies models has shown several distinct relationships of deposit type and grade distribution. In both pipes, the lithological facies represent grade units which can be distinguished from each other in terms of relative size and abundance of diamonds. A positive relationship between olivine grain size and abundance with diamond size and abundance is observed, indicating that sorting of fragmental kimberlites influences diamond distribution. Though surface geological processes do not control the diamond potential of the erupting magma, they can be responsible for concentrating diamonds into economically significant proportions. A good understanding of the eruption, transport and depositional processes responsible for the individual lithological units and the diamond distribution within them is important for successful resource estimation. This may lead to recognition of areas suitable for selective mining, making a marginal deposit economic.