黄土震陷性深度特征的试验研究

黄土震陷是地震发生时黄土地区发生的一种灾害。以典型马兰黄土（Q3）作为研究对象,对5组不同深度的原状黄土试样进行室内动三轴震陷试验,研究了该场地黄土震陷性随深度的变化特征。研究结果表明,（1）在天然含水率或是增湿、减湿情况下,黄土震陷深度曲线随动应力的增加均经历了一个从平稳、快速、再收敛至最大震陷深度的发展过程;（2）黄土震陷深度曲线的发展阶段动应力区间不尽相同,随着含水率的增加,黄土震陷快速发展期的动应力区间在变窄,最小动应力值变小,含水率20%条件下比5%最小动应力值可降低30%;（3）典型马兰黄土存在一个最大震陷深度,其最大震陷深度不受动应力、含水率影响,含水率仅能够降低达到最大震陷深度时最小动应力,加速黄土震陷深度的发展进程。在动应力不断增加的情况下,最终的黄土震陷深度曲线收敛于最大震陷深度,本次实验黄土场地的最大震陷深度约为15.5 m。     

湘东地区锡田印支期花岗岩的地球化学特征及其构造意义

华南印支期花岗岩分布较为分散,其构造背景长期存在争议。湘东地区的锡田印支期花岗岩位于扬子板块和华夏板块的结合带中部,主要由黑云母花岗岩和黑云母二长花岗岩组成,二者均含有较高的SiO_2(67.6%~76.8%)和全碱含量(ALK=K_2O+Na_2O,6.8%~10.7%),呈过铝质的特征(A/CNK值范围为1.0~1.2),分异指数D.I值为84~93;微量元素显示出Rb、Th、U富集和Ba、Nb、Sr、P、Ti亏损的特征,稀土元素配分图呈右倾海鸥状,轻重稀土分馏明显,指示岩体经历了高度的分异演化;P_2O_5和微量元素比值随着分异程度变化的特征,表明岩石过铝质的特征是由高度的分离结晶作用造成。锡田印支期花岗岩的ε_(Hf)(t)值为-11.3~-4.34,δ~(18)O值分布范围为6.9‰~10.8‰,O同位素分布较为分散,主要是记录了源岩与流体的不同特征。Hf同位素的二阶段模式年龄为1.6～2.2Ga,反映其源区主要为中元古-古元古代的华夏基底;Hf-O同位素呈现出良好的线性关系,同时未蚀变的花岗岩明显偏离源岩为沉积岩的大容山花岗岩,表明锡田花岗岩的形成受到了幔源岩浆的底侵作用。结合邻区邓阜仙岩体和王仙岭岩体的研究成果,显示研究区在印支期就处于伸展的构造背景,可能与古太平洋板块的俯冲作用有关。     

Origin of Paleofluids in Dabashan Foreland Thrust Belt:Geochemical Evidence of 13C,18O and 87Sr/86Sr in Veins and Host Rocks

In the last ten years, with important discoveries from oil and gas exploration in the Dabashan foreland depression belt in the borderland between Shanxi and Sichuan provinces, the relationship between the formation and evolution of, and hydrocarbon accumulation in, this foreland thrust belt from the viewpoint of basin and oil and gas exploration has been studied. At the same time, there has been little research on the origin of fluids within the belt. Based on geochemical system analysis including Z values denoting salinity and research on δ13C, δ18O and 87Sr/86Sr isotopes in the host rocks and veins, the origin of paleofluids in the foreland thrust belt is considered. There are four principal kinds of paleofluid, including deep mantle-derived, sedimentary, mixed and meteoric. For the deep mantle-derived fluid, the δ13C is generally less than ?5.0‰PDB, δ18O less than -10.0‰PDB, Z value less than 110 and 87Sr/86Sr less than 0.70600; the sedimentary fluid is mainly marine carbonate-derived, with the δ13C generally more than ?2.0‰PDB, δ18O less than ?10.0‰PDB, Z value more than 120 and 87Sr/86Sr ranging from 0.70800 to 0.71000; the mixed fluid consists mainly of marine carbonate fluid (including possibly a little mantle-derived fluid or meteoric water), with the δ13C generally ranging from ?2.0‰ to ?8.0‰PDB, δ18O from ?10.0‰ to ?18.0‰ PDB, Z value from 105 to 120 and 87Sr/86Sr from 0.70800 to 0.71000; the atmospheric fluid consists mainly of meteoric water, with the δ13C generally ranging from 0.0‰ to ?10.0‰PDB, δ18O less than ?8.0‰PDB, Z value less than 110 and 87Sr/86Sr more than 0.71000. The Chengkou fault belt encompasses the most complex origins, including all four types of paleofluid; the Zhenba and Pingba fault belts and stable areas contain a simple paleofluid mainly of sedimentary type; the Jimingsi fault belt contains mainly sedimentary and mixed fluids, both consisting of sedimentary fluid and meteoric water. Jurassic rocks of the foreland depression belt contain mainly meteoric fluid.     

青藏高原东北部泥炭沉积粒度与元素记录的全新世千年尺度的气候变化

通过对青藏高原东北部共和盆地泥炭沉积的粒度与地球化学元素分析, 重建了区域全新世千年尺度的气候变化过程. 结果显示: 10.0~8.6 cal ka BP区域暖湿程度逐渐增加, 但在8.6~7.1 cal ka BP气候相对寒冷干燥, 7.1~3.8 cal ka BP 暖湿程度总体上为全新世最佳, 但也出现明显的气候波动, 3.8~0.5 cal ka BP气候向冷干方向发展, 0.5 cal ka BP以来气候又逐渐转向暖湿. 这一特征与中国东部季风区的气候变化有很好的一致性. 此外, 区域全新世气候变化过程中存在10次千年尺度的寒冷事件, 并与高原冰芯、 湖泊、 泥炭和风成沉积记录的古气候变化, 甚至与北半球高低纬度的气候变化都具有良好的可比性. 因此, 认为区域全新世气候变化具有"季风模式"与"千年尺度震荡"的双重特点.     

红旗岭镁铁-超镁铁岩侵入体及铜镍硫化物矿床的成岩成矿机制

红旗岭铜镍矿床地处华北地台与吉黑地槽系接触带--辉发河断裂北侧.区内出露30多个镁铁-超镁铁质岩体,其中1、7号超镁铁岩体中赋存铜镍硫化物矿(床)体.含矿岩体分相明显,各类岩石均具堆积结构.铜镍矿体呈似板状、脉状、透镜状及囊状赋存于超镁铁岩体底部橄榄辉岩相中.岩石学和地球化学研究表明,7号岩体形成以流动分异为主,1号岩体为重力分异;原始岩浆属拉斑玄武质,块状矿石系压滤作用产物,后续岩浆的补给和混合补充了成矿物质,硫化物不混溶程度受挥发分制约,矿床属岩浆深部熔离分异成因,成矿时代为印支期.     

Late Paleozoic Fluid Systems and Their Ore-forming Effects in the Yuebei Basin, Northern Guangdong, China

Based on detailed and systematic researches of the geology of ore deposits, fluid inclusions and isotope geochemistry etc., and regarding the Late Paleozoic fluid system of the Yuebei Basin as an integrated object in this paper, we have revealed the temporo-spatial evolution law of the basin＇s fluid system and discussed its ore-forming effects by simulating and analyzing the distribution of ore-forming elements, the fluid thermodynamics and dynamics of evolution processes of this basin. The results show that Late Paleozoic ore-forming fluid systems of the Yuebei Basin include four basic types as follows. （1） The sea floor volcanic-exhalation system developed during the rapid basin slip-extension stage in the Mid-Late Devonian, which affected the Dabaoshan region. It thus formed the Dabaoshan-type Cu-Pb-Zn-Fe sea floor volcanic-exhalation sedimentary deposits. （2） The compaction fluid system developed during the stable spreading and thermal subsidence-compression stage of the basin in the Mid-Late Devonian. The range of its effects extended all over the whole basin. It resulted in filling-metasomatic deposits, such as the Hongyan-type pyrite deposits and pyrite sheet within the Fankou-type Cu-Pb-Zn-S deposits. （3） The hot water circulation system of sea floor developed during the stage of basin uplifting and micro-aulacogen from the late Late Carboniferous to Middle Carboniferous. The range of its effects covered the Fankou region. It thus formed MVT deposits, such as the main orebody of the Fankou-type Pb-Zn-S deposits. （4） The gravity fluid system developed during the stage of fold uplifting and the basin closed from Middle Triassic to Jurassic, forming groundwater hydrothermal deposits, e.g. the veinlet Pb-Zn-calcite orebodies of the Fankou-type Pb-Zn- S deposits. Migration and concentration of the ore-forming fluids were constrained by the state of temporo-spatial distribution of its fluid potential. Growth faults not only converged the fluids and drove them to move upwards, but also the fluids often crossed the faults to the edges of the basin at the bottom of these faults and the lithologic interfaces, and even migrated to the basin＇s edges from top to bottom along the faults, which may be one of the basic reasons for the stratabound deposits to cluster mainly along the contemporaneous faults on the inner border of the basin. The superposed mineralization resulting from the multi-stage activity of contemporaneous faults and ore-forming fluid systems in the basin may be one of the key factors for forming superlarge ore deposits.     

基于WRF驱动的CLM模型对青藏高原地区陆面过程模拟研究

NCAR-CLM是目前国际上发展较为完善的陆面过程模型.鉴于大多数研究利用气象站点的数据驱动CLM模型, 尝试将WRF气候模型的模拟结果作为驱动CLM的面上强迫场数据来对青藏高原陆面能量特征进行模拟研究.对WRF气候模型模拟的输出结果与青藏高原气象站观测数据进行比较分析表明, WRF模拟输出的气温和向下短波辐射数值与观测值的相关系数大于0.92(p >0.05), 气压和比湿的R²在0.80以上(p >0.05), 降雨和风速的模拟性能不稳定, 但WRF模拟输出的强迫场也可以作为CLM模型的驱动数据. CLM模拟的地表温度、 感热和潜热通量与青藏高原气象站观测的地表温度以及涡度通量数据验证分析表明, 虽然CLM对地表温度的模拟在合理范围内, 但模拟与观测值还是有较大偏差, 潜热和感热之间的相关系数分别为0.87和0.68(p >0.05), 表明CLM的模拟结果在单点上是可靠的.据此, 在此模拟结果基础上分析了青藏高原地区的陆面能量时空分布特征.     

塔中地区奥陶系鹰山组埋藏岩溶期次及其对储层的贡献

利用岩心、薄片、测井以及地化分析测试资料,研究塔中地区奥陶系鹰山组深部碳酸盐岩的埋藏岩溶作用特征、期次及对储层分布的控制机理。研究表明,在鹰山组中共识别出三期不同发育规模、程度和缝洞发育特征的埋藏岩溶作用。第一期发生于晚加里东期至早海西期,在全区均有分布,但其溶蚀作用较弱;第二期发生于晚海西期至印支期,受构造作用、先期孔洞层和有利沉积相带的控制明显,并且可能与晚海西期岩浆热液活动有关,形成的缝洞多为方解石和萤石充填;第三期发育于喜山期,受走滑断裂和裂缝发育的控制,形成的缝洞多为轻质原油和天然气充填;整体上深部埋藏溶蚀作用常与有机质热演变过程中伴随的酸性流体及热液溶蚀碳酸盐矿物有关,主要沿先期孔洞层及断裂发生溶蚀作用,具有期次多、规模不等、近端溶蚀及远端胶结等特性,形成的溶蚀孔洞具有对原有缝洞系统的继承性,是储层形成及优化改造的关键因素。     

赞比亚西北省索卢韦齐县铜钴多金属矿地质特征

赞比亚西北省索卢韦齐县铜钴多金属矿主要存在三种矿化类型,第一种是层控型铜矿,矿石矿物为黄铜矿、黝铜矿、辉铜矿,多呈条带状、透镜状等形态,平行黑云石英片岩和二云石英片岩的片理展布;第二种为沉积型铜矿,受到背斜和穹窿的控制,含矿岩系主要为加丹加超群(Katanga)下部罗安组(Roan)页岩、砂岩,金属矿物主要为水胆石、孔雀石、蓝铜矿,多呈星点状、浸染状、斑杂状、团块状等分布在含矿页岩、砂岩中;第三种是热液型铜矿,充填在加丹加超群及其更老的地层中,矿化类型为黄铜矿黄铁矿石英脉型,一般为小型脉状矿床。该类型矿床可与前两类矿床叠加,使矿石品位提高。     

大别山区域成矿体系与成矿规律的初步研究

在大别山主要金属矿床基本特征及其形成的地质背景研究基础上，通过对燕山期岩浆岩、金属矿床形成的物源一流体的综合研究，在大别山初步建立了两个燕山期岩浆一物源一流体一成矿系统，并在此基础上，就区域矿床的形成规律进行了讨论。