METEOROLOGICAL TSUNAMIS IN SOUTHERN BRITAIN: AN HISTORICAL REVIEW*

ABSTRACT. Meteorological tsunamis, or meteo‐tsunamis, are long‐period waves that possess tsunami characteristics but are meteorological in origin, although they are not storm surges. In this article we investigate the coast of southern Britain‐the English Channel, the Bristol Channel, and the Severn Estuary‐for the occurrence of tsunami‐like waves that, in the absence of associated seismic activity, we recognize as meteo‐tsunamis. The passage of squall lines over the sea apparently generated three of these events, and two seem to have been far‐traveled, long‐period waves from mid‐North Atlantic atmospheric low‐pressure systems. The remaining three wave events appear to have been associated with storms that, among possible explanations, may have induced large‐amplitude standing waves‐such as seiches‐or created long‐period waves through the opposition of onshore gale‐force winds and swells with high ebb tidal current velocities. This coastal hazard has resulted in damage and loss of life and should be considered in future coastal defense strategies and in beachuser risk assessments.     

LATE QUATERNARY MORAINES ALONG THE SEKHOKONG RANGE, EASTERN LESOTHO: CONTRASTING THE GEOMORPHIC HISTORY OF NORTH- AND SOUTH-FACING SLOPES

Considerable Quaternary environmental reconstruction for the high Drakensberg is based on geomorphological and sedimentological work undertaken along the northern aspects of the Sekhokong mountain range of eastern Lesotho. Given that no previous investigations have focused on the southern aspects, this paper documents the observed geomorphology and provides a more complete palaeo-environmental picture for this range. Data on the morphology, sedimentology and micromorphology for two linear debris ridges are presented. It is demonstrated that the two ridges are most likely moraines originating from a small niche glacier. The combined use of macro- and micro-scale sedimentology is proven to be an essential tool in ascribing a glacial process origin for the landforms, given the complex depositional history they have undergone. AMS ages obtained from the deposits (14 700 cal. yrs bp and 19 350 cal. yrs bp ) places these in the time-scale of the Last Glacial Maximum. The study demonstrates rather contrasting aspect-controlled palaegeomorphological environments along the Sekhokong range, which is also reflected in the dissimilar contemporary biophysical micro-environments. It is suggested that the south-facing slopes were dominated by glacial processes during the Last Glacial Maximum (LGM), as is evident from the moraines, while the proposition for previously described north-facing glacial cirques is rejected based on the absence of erosional/depositional evidence and greater insolation received on these warmerequator-facing slopes. Rather, we propose that the observed north-facing hollows are a product of a multitude of geomorphic processes spanning several tens to hundreds of thousands of years.     

Sulphur cycling in organic-rich marine sediments from a Scottish fjord

In this study, the biogeochemical transformations of sulphur in organic‐rich marine sediments in a Scottish fjord are investigated by a combination of pore water and sediment geochemistry with sulphide diffusive gradient thin‐film probes and sulphate isotopic data (δ³⁴S and δ¹⁸O). Particular attention is paid to sulphur cycling in the upper sediment profile where sulphate reduction occurs but free sulphide is below the detection limits of conventional pore water geochemical analysis but quantifiable by sulphide diffusive gradient thin film. In the uppermost part of the sediment core, δ¹⁸O sulphate decreased from near‐sea water values to +7‰, indicating that anoxic sulphide oxidation dominated during this interval. Sulphate δ³⁴S remained unchanged as there was no net sulphate reduction (i.e. reduction was balanced by re‐oxidation). Below 4 cm depth, there was a slight increase in sulphate δ³⁴S from 20‰ to 23‰ associated with minor accumulation of iron sulphide. The δ¹⁸O of the sulphate also increased, to around +10‰ at 10 cm depth, as a result of the isotopic exchange of sulphate–oxygen with pore water and/or sulphur disproportionation reactions mediated during sulphur cycling. These processes continued to increase the δ¹⁸O of the sulphate to 14‰ at 20 cm depth with no further change in the δ³⁴S of the sulphate. Below 20 cm depth, free sulphide is detectable in pore waters and both the δ³⁴S of the sulphate and sulphide increase with depth with an offset controlled by kinetic fractionation during bacterial sulphate reduction. The δ³⁴S of the sedimentary organic fraction shifted towards lower, more bacteriogenic, values with depth in the profile, without any increase in the size of this sulphur pool. Thus, the organic sulphur fraction was open to interaction with bacteriogenic sulphide without the occurrence of net addition. Therefore, caution should be exercised when using sulphur isotopic compositions to infer simple net addition of bacteriogenic sulphide to the organic sulphur fraction.     

Wollastonite--Scapolite Assemblages as Indicators of Granulite Pressure-Temperature-Fluid Histories: The Rauer Group, East Antarctica

Mid-Proterozoic ( 1000 Ma) granulite facies calc-silicates fromthe Rauer Group, East Antarctica, contain grossular-wollastonite-scapolite-dinopyroxene( + quartz or calcite) assemblages which preserve symplectiteand corona textures typically involving the growth of secondarywollastonite. The textures include (1) wollastonite rims betweenquartz and calcite; (2) wollastonite-plagioclase rims and intergrowthsbetween quartz and scapolite; (3) wollastonite-scapolite-clinopyroxeneinter-growths replacing grossular; and (4) wollastonite-plagioclasesymplectites replacing grossular or earlier symplectites (3). Reactions between grossular, scapolite, wollastonite, calcite,quartz, anorthite, and vapour, have been modelled in the CaO-Al₂O₃SiO₂-H₂O-CO₂and more complex systems using the internally consistent data-setof Holland & Powell (1990). Reactions producing scapoliteand wollastonite consume vapour as temperature increases (i.e., carbonation), in agreement with the results of Moecher &Essene (1990). These calc-silicates can therefore behave asfluid sinks under high-grade conditions. Conversely, they maybe important fluid sources on cooling and contribute to theformation of post-metamorphic CO₂rich fluid inclusions in isobaricallycooled granulites. P-T-_CO2 diagrams calculated for typical phase compositions (e.g., garnet, scapolite) demonstrate that the observed texturesare a record of near-isothermal decompression at 800–850 C, consistent with P—rpath determinations based on otherrock types from the Rauer Group. For example, texture (2) resultsfrom crossing the reaction Scapolite + Quartz = Wollastonite + Plagioclase + V on decompression, at 6. 5–7 kb, 820 C, and a_CO2 of0–4–0–5. Furthermore, correlations betweenmodes of product phases (e. g., wollastonitexlinopyroxene) andreactant garnet composition preclude open-system behaviour inthe formation of these textures, consistent with post-peak vapour-absentreactions such as Grossular + Calcite + Quartz = Wollastonite + Scapolite occurring on decomposition at high temperatures (>800C). Reaction textures developed in calc-silicates from other granuliteterranes often involve the formation of grossular ( + quartz calcite) as rims on wollastonite-scapolite, or replacementof wollastonite by calcite-quartz. These textures have developedprincipally in response to cooling below 780–810 C andmay be signatures of near-isobaric cooling. Infiltration ofhydrous fluid is not a necessary condition for the productionof garnet coronas in wollastonite-scapolite granulites. ^*Present address: Department of Earth Sciences, University ofMelbourne, Parkville, Victoria 3052, Australia     

Origin of hibonite-pyroxene spherules found in carbonaceous chondrites

Abstract— We have studied both of the known glass-free, hibonite-pyroxene spherules: MYSM3, from Murray (CM2), and Y17–6, from Yamato 791717 (CO3). They consist of hibonite plates (～2 wt% TiO^tot₂) enclosed in Al-rich pyroxene that has such high amounts of CaTs (CaAl₂SiO₆) component, up to ～80 mol%, that it must have crystallized metastably. Within the pyroxene, abundances of MgO and SiO₂ are strongly correlated with each other and are anticorrelated with those of Al₂O₃, reflecting an anticorrelation between the diopside and CaTs components of the pyroxene. In contrast with previous results for Type B fassaite, however, we do not observe an anticorrelation between MgO and TiO^tot₂, possibly reflecting different relative distribution coefficients for Ti³⁺ and Ti⁴⁺ in the aluminous pyroxene of the spherules from those found for fassaite in Type B inclusions. Previously described hibonite-silicate spherules have ²⁶Mg deficits but the present samples do not. Furthermore, the pyroxene in Y17-6 has excess ²⁶Mg, while the hibonite it encloses does not, indicating that the two phases either had different initial ²⁶Al/²⁷Al ratios or different initial ²⁶Mg/²⁴Mg ratios. The Ti isotopic compositions of the present samples are highly unusual: δ⁵⁰Ti = 103.4 ± 5.2%o in MYSM3 and -61.4 ± 4.1%0 in Y17-6, which are among the largest ⁵⁰Ti anomalies reported for any refractory inclusion. The textures suggest that hibonite crystallized first; but based on the calculated bulk compositions of both spherules, it is not the liquidus phase in either sample, which suggests that the hibonite in both samples is relict. The presence of ragged hibonite grains in MYSM3 and rounded hibonite grains in Y17-6 and a lack of isotopic equilibrium between pyroxene and hibonite support this conclusion. The spherules crystallized from liquid droplets that probably formed as a result of the melting of solid precursor grains that included hibonite. The heating events were too short and/or not hot enough to melt all the hibonite. The droplets cooled quickly enough that CaTs-rich pyroxene crystallized instead of anorthite. Based on the observed differences in isotopic composition, it is unlikely that the precursors of the present samples formed in the same reservoir as each other or as the previously described hibonite-silicate spherules, providing further evidence of the isotopic heterogeneity of the early solar nebula.     

Particle shape: a review and new methods of characterization and classification

Shape is a fundamental property of all objects, including sedimentary particles, but it remains one of the most difficult to characterize and quantify for all but the simplest of shapes. Despite a large literature on the subject, there remains widespread confusion regarding the meaning and relative value of different measures of particle shape. This paper re‐examines the basic concepts of particle shape and suggests a number of new and modified methods which are widely applicable to a range of sedimentological problems; it is shown that the most important aspects of particle form are represented by the I/L ratio (elongation ratio) and S/I ratio (flatness ratio). A combination of these two ratios can be used to classify particles in terms of 25 form classes. A method of obtaining a quantitative measure of particle roundness using simple image analysis software is described, and a new visual roundness comparator is presented. It is recommended that measurements of both roundness and circularity (a proxy measure of sphericity) are made on grain images in three orthogonal orientations and average values calculated for each particle. A further shape property, irregularity, is defined and a classification scheme proposed for use in describing and comparing irregular or branching sedimentary particles such as chert and coral.     

Testate amoebae as a proxy for reconstructing Holocene water table dynamics in southern Patagonian peat bogs

Testate amoebae are abundant and diverse in Sphagnum peat bogs and have been used extensively as indicators of past water table depths. Although these unicellular protists are widely dispersed with globally similar hydrological preferences, regional variations in communities demand region‐specific transfer functions. Here we present the first transfer function for southern Patagonian bogs, based on 154 surface samples obtained from transects in five bogs sampled in 2012 and 2013. Significant variance was explained by pH, electrical conductivity and, in particular, water table depth. Transfer functions for water table were constructed using weighted averaging and evaluated by cross‐validation and independent test sets. The optimal transfer function has predictive ability, but relatively high prediction errors given the wide range in sampled water tables. The use of independent test sets, as well as cross‐validation, allows a more rigorous assessment of model performance than most previous studies. For a subset of locations we compare surface and subsurface samples to demonstrate significant differences in community composition, possibly due to vertical zonation. Our results provide the first quantification of hydrological optima and tolerances for several rare species, which may include Southern Hemisphere endemics and pave the way for palaeohydrological reconstructions in southern Patagonian bogs.     

The partitioning of the total sediment load of a river into suspended load and bedload: a review of empirical data

The partitioning of the total sediment load of a river into suspended load and bedload is an important problem in fluvial geomorphology, sedimentation engineering and sedimentology. Bedload transport rates are notoriously hard to measure and, at many sites, only suspended load data are available. Often the bedload fraction is estimated with ‘rule of thumb’ methods such as Maddock’s Table, which are inadequately field‐tested. Here, the partitioning of sediment load for the Pitzbach is discussed, an Austrian mountain stream for which high temporal resolution data on both bedload and suspended load are available. The available data show large scatter on all scales. The fraction of the total load transported in suspension may vary between zero and one at the Pitzbach, while its average decreases with rising discharge (i.e. bedload transport is more important during floods). Existing data on short‐term and long‐term partitioning is reviewed and an empirical equation to estimate bedload transport rates from measured suspended load transport rates is suggested. The partitioning averaged over a flood can vary strongly from event to event. Similar variations may occur in the year‐to‐year averages. Using published simultaneous short‐term field measurements of bedload and suspended load transport rates, Maddock’s Table is reviewed and updated. Long‐term average partitioning could be a function of the catchment geology, the fraction of the catchment covered by glaciers and the extent of forest, but the available data are insufficient to draw final conclusions. At a given drainage area, scatter is large, but the data show a minimal fraction of sediment transported in suspended load, which increases with increasing drainage area and with decreasing rock strength for gravel‐bed rivers, whereby in large catchments the bedload fraction is insignificant at ca 1%. For sand‐bed rivers, the bedload fraction may be substantial (30% to 50%) even for large catchments. However, available data are scarce and of varying quality. Long‐term partitioning varies widely among catchments and the available data are currently not sufficient to discriminate control parameters effectively.     

In situ formation of palisade bodies in calcium,aluminum-rich refractory inclusions

Abstract— It has been suggested that palisade bodies—shells of spinel found within some calcium, aluminum-rich inclusions (CAIs) and the phases the shells enclose—are intact mini-CAIs that predate and were captured by their current hosts while the latter were still molten. We present new data and observations that indicate that most palisade bodies formed instead in situ while their host inclusions were crystallizing. The evidence includes observations of spinel-lined cavities and glass-filled, circular structures outlined by spinel in experimental run products crystallized from melts; a partially formed palisade body in an inclusion; a fassaite crystal that is optically continuous across a palisade wall; and similarity of unusual mineral compositions in some palisade bodies and their hosts. Our observations can be used to refute arguments for exotic origin and are most consistent with a model for in situ formation involving: (1) formation of vesicles in a largely molten inclusion; (2) nucleation of spinel upon and/or adherence to vapor-melt interfaces, forming spinel shells around vesicles; (3)leakage of vesicles and filling with melt while spinel shells remain largely intact; and (4) crystallization of melt inside shells. This model is similar to one proposed for formation of segregation vesicles, which are partially- to completely-filled vesicles found in some terrestrial basalts. In addition, we interpret framboids (i.e., dense clusters of spinel with little material between grains, found in most inclusions that contain palisade bodies) as polar or near-polar sections through palisade bodies and therefore do not make a genetic distinction between the two features.