Geology, tectonics, and the 2002-2003 eruption of the Semeru volcano, Indonesia: Interpreted from high-spatial resolution satellite imagery

The paper illustrates the application of high-spatial resolution satellite images in interpreting volcanic structures and eruption impacts in the Tengger-Semeru massif in east Java, Indonesia. We use high-spatial resolution images (IKONOS and SPOT 5) and aerial photos in order to analyze the structures of Semeru volcano and map the deposits. Geological and tectonic mapping is based on two DEMs and on the interpretation of aerial photos and four SPOT and IKONOS optical satellite images acquired between 1996 and 2002. We also compared two thermal Surface Kinetic Temperature ASTER images before and after the 2002-2003 eruption in order to delineate and evaluate the impacts of the pyroclastic density currents. Semeru's principal structural features are probably due to the tectonic setting of the volcano. A structural map of the Tengger-Semeru massif shows four groups of faults orientated N40, N160, N75, and N105 to N140. Conspicuous structures, such as the SE-trending horseshoe-shaped scar on Semeru's summit cone, coincide with the N160-trending faults. The direction of minor scars on the east flank parallels the first and second groups of faults. The Semeru composite cone hosts the currently active Jonggring-Seloko vent. This is located on, and buttressed against, the Mahameru edifice at the head of a large scar that may reflect a failure plane at shallow depth. Dipping 35° towards the SE, this failure plane may correspond to a weak basal layer of weathered volcaniclastic rocks of Tertiary age. We suggest that the deformation pattern of Semeru and its large scar may be induced by flank spreading over the weak basal layer of the volcano. It is therefore necessary to consider the potential for flank and summit collapse in the future. The last major eruption took place in December 2002-January 2003, and involved emplacement of block-and-ash flows. We have used the 2003 ASTER Surface Kinetic Temperature image to map the 2002-2003 pyroclastic density current deposits. We have also compared two 10 m-pixel images acquired before and after the event to describe the extent and impact of an estimated volume of 5.45 × 10⁶ m³ of block-and-ash flow deposits. An ash-rich pyroclastic surge escaped from one of the valley-confined block-and ash flows at 5 to 8 km distance from the crater and swept across the forest and tilled land on the SW side of the Bang River Valley. Downvalley, the temperature of the pyroclastic surge decreased and a mud-rich deposit coated the banks of the Bang River Valley. Thus, hazard mitigation at Semeru should combine: (1) continuous monitoring of the eruptive activity through an early-warning system, and (2) continuous remote sensing of the morphological changes in the drainage system due to the impact of frequent pyroclastic density currents and lahars.     

Quartz latite rheoignimbrite flows of the Etendeka Formation,north-western Namibia

The Etendeka Formation of north-western Namibia consists of a sequence of interbedded quartz latites and tholeiitic basalts and forms part of the Karoo Igneous Province in southern Africa. The age of the Etendeka Formation is approximately 130–135 Ma. The quartz latites make up a significant proportion of the stratigraphic succession (<25% of the total stratigraphic thickness) and form as much as 60% of the outcrop area in the southern Etendeka. Apart from some systematic differences between pitchstones and devitrified quartz latite, largely explained by alteration processes, individual quartz latite units exhibit remarkably uniform compositions with no significant vertical or lateral variation. Geochemistry can be used as a primary criterion for the correlation of major quartz latite units over much of the southern Etendeka area enabling the reconstruction of the Etendeka Formation stratigraphy in this region. Individual quartz latite units occur as voluminous (400–2600 km³), widespread (up to 8800 km²), sheet-like deposits typically between 40 and 300 m thick. Each unit consists of basal, main and upper zones. The main zone generally constitutes over 70% of the thickness of the unit and typically consists of texturally featureless devitrified quartz latite. In contrast the basal and upper zones of the flow are characterised by flow banding, pitchstone lenses and breccia, with rare occurrences of pyroclastic textures. The quartz latites are sparsely porphyritic (<10% phenocrysts) with glassy or devitrified groundmass textures. The phenocrysts consist of plagioclase, pyroxene, titanomagnetite and rare ilmenite. Pyroxene geothermometry indicates high (1000–1100°C) temperatures of crystallisation which, coupled with the absence or primary hydrous phases, indicates that the quartz latites were relatively hot, H₂O-undersaturated magmas. The quartz latites display features common to both rhyolite lavas and ignimbrites and are clearly the products of an unusual eruption style. The local preservation of pyroclastic textures and the broad areal extent of these units lead to the conclusion that the quartz latites are high-temperature rheomorphic ignimbrites (i.e. rheoignimbrites). A combination of high eruption temperature and relatively low viscosity helps to explain the often completely welded and homogeneous textures observed in most quartz latite outcrops in the Etendeka area.     

A stochastic model for active fire detection using the thermal bands of MODIS data

Active fire detection using satellite thermal sensors usually involves thresholding the detected brightness temperature in several bands. Most frequently used features for fire detection are the brightness temperature in the 4-/spl mu/m wavelength band (T/sub 4/) and the brightness temperature difference between 4- and 11-/spl mu/m bands (/spl Delta/T=T/sub 4/-T/sub 11/). In this letter, the task of active fire detection is examined in the context of a stochastic model for target detection. The proposed fire detection method consists of applying a decorrelation transform in the (T/sub 4/,/spl Delta/T) space. Probability density functions for the fire and background pixels are then computed in the transformed variable space using simulated Moderate Resolution Imaging Spectroradiometer (MODIS) thermal data under different atmospheric humidity conditions and for cases of flaming and smoldering fires. The Pareto curve for each detection case is constructed. Optimal thresholds are derived by minimizing a cost function, which is a weighted sum of the omission and commission errors. The method has also been tested on a MODIS reference dataset validated using high-resolution SPOT images. The results show that the detection errors are comparable with the expected values, and the proposed method performs slightly better than the standard MODIS absolute detection method in terms of the lower cost function.     

Holocene thermal optimal and climate variability of East Asian monsoon inferred from forest reconstruction of a subalpine pollen sequence, Taiwan

The East Asian monsoon Holocene optimal period has been debated both about duration and whether conditions were a maximum in thermal conditions or in precipitation. In this study we show Holocene climate variability inferred by a forest reconstruction of a subalpine pollen sequence from peat bog deposits in central Taiwan, based on modern analogues of various altitudinal biomes in the region. A warmer interval occurred between 8 and 4 ka BP (calibrated ¹⁴C years) when the subtropical forests were more extensive. The Holocene thermal optimum is represented by an altitudinal tropical forest at 6.1–5.9 ka BP and 6.9 ka BP and only the latter was accompanied by wet conditions, indicating decoupling of thermal and precipitation mechanism in the middle Holocene. Abrupt and relative severe cold phases, shown by biome changes, occurred at about 11.2–11.0 ka BP; 7.5 ka BP; 7.2 ka BP; 7.1 ka BP; 5.2 ka BP, 5.0 ka BP and 4.9 ka BP. A spectral analysis of pollen of a relatively cold taxon — Salix, reveals that the time series is dominated by a 1500 yr periodicity and similar to the cold cycle reported in the marine records of Indian and western Pacific Oceans. The cold–warm conditions inferred by the change of forests show close relationship to solar energy in comparison with the production rate of Be-10.     

Experimental evaluation of force analogy method (FAM) by element type

The force analogy method(FAM) is considered as one of the most time-saving and cost-efficient methods for analyzing frames. Through a set of assumptions and restoring forces, FAM analyzes nonlinear frames responses through Hooke's law. This study evaluates the effect of element type on FAM through numerical and experimental tests. The conventional Euler Bernoulli(EB) element is replaced by the Timoshenko(TS) beam-column element and the results are interpreted and compared with experimental findings. Three experimental tests were conducted for benchmarking and comparison purposes via 2 D aluminum frames. The results indicated that during the analysis, when the frame response is in the linear region, there is no difference between the element types in the response of the frames. When the frame entered the plastic region, the frames which were analyzed by the TS element revealed closer responses to the experimental outcomes. The gap between the results of the frame which was analyzed by EB and TS enlarged especially when the frame experienced a sharp or huge rotation of more than 0.2 rad. The final recorded deformations based on the TS element revealed an accuracy between 98.05% to 98.65%, while the EB element showed 14.66% to 45.14% for rotations of more than 0.2 rad at plastic hinge locations(PHLs).     

Simulation of heavy precipitation episode over eastern Peninsular Malaysia using MM5: sensitivity to cumulus parameterization schemes

A comparative study has been conducted to investigate the skill of four convection parameterization schemes, namely the Anthes–Kuo (AK), the Betts–Miller (BM), the Kain–Fritsch (KF), and the Grell (GR) schemes in the numerical simulation of an extreme precipitation episode over eastern Peninsular Malaysia using the Pennsylvania State University—National Center for Atmospheric Research Center (PSU-NCAR) Fifth Generation Mesoscale Model (MM5). The event is a commonly occurring westward propagating tropical depression weather system during a boreal winter resulting from an interaction between a cold surge and the quasi-stationary Borneo vortex. The model setup and other physical parameterizations are identical in all experiments and hence any difference in the simulation performance could be associated with the cumulus parameterization scheme used. From the predicted rainfall and structure of the storm, it is clear that the BM scheme has an edge over the other schemes. The rainfall intensity and spatial distribution were reasonably well simulated compared to observations. The BM scheme was also better in resolving the horizontal and vertical structures of the storm. Most of the rainfall simulated by the BM simulation was of the convective type. The failure of other schemes (AK, GR and KF) in simulating the event may be attributed to the trigger function, closure assumption, and precipitation scheme. On the other hand, the appropriateness of the BM scheme for this episode may not be generalized for other episodes or convective environments.     

Coastal eutrophication, land use changes and Ceratium furca (Dinophyceae) blooms in Pago Pago Harbor, American Samoa 2007-2009

The bloom forming dinoflagellate, Ceratium furca, has been linked with coastal eutrophication worldwide in tropical and subtropical locations. During the summer of 2007, an unusual 6-month long bloom of C. furca was observed in Pago Pago Harbor, Tutuila Island, American Samoa. Incidents of dinoflagellate blooms in this area have not been previously reported. The bloom was first reported in May and dissipated in November 2007. In February-March 2009, a similar C. furca bloom was observed. During both blooms,...     

Wave climate simulation for southern region of the South China Sea

This study investigates long-term variability and wave characteristic trends in the southern region of the South China Sea (SCS). We implemented the state-of-the art WAVEWATCH III spectral wave model to simulate a 31-year wave hindcast. The simulation results were used to assess the inter-annual variability and long-term changes in the SCS wave climate for the period 1979 to 2009. The model was forced with Climate Forecast System Reanalysis winds and validated against altimeter data and limited available measurements from an Acoustic Wave and Current recorder located offshore of Terengganu, Malaysia. The mean annual significant wave height and peak wave period indicate the occurrence of higher wave heights and wave periods in the central SCS and lower in the Sunda shelf region. Consistent with wind patterns, the wave direction also shows southeasterly (northwesterly) waves during the summer (winter) monsoon. This detailed hindcast demonstrates strong inter-annual variability of wave heights, especially during the winter months in the SCS. Significant wave height correlated negatively with Niño3.4 index during winter, spring and autumn seasons but became positive in the summer monsoon. Such correlations correspond well with surface wind anomalies over the SCS during El Nino events. During El Niño Modoki, the summer time positive correlation extends northeastwards to cover the entire domain. Although significant positive trends were found at 95 % confidence levels during May, July and September, there is significant negative trend in December covering the Sunda shelf region. However, the trend appears to be largely influenced by large El Niño signals.     

DNA identification of the phyllosoma diet of Jasus edwardsii and Scyllarus sp. Z

The development of an effective artificial larval diet has been a major stumbling block for advancing the aquaculture of spiny lobsters internationally. Attempts to determine the natural diet of spiny lobster larvae have been impeded by their small size and sparse distribution in the open ocean, making these larvae difficult to study using conventional methods. Recent advances in molecular genetic techniques have provided a novel route for identifying the natural prey of spiny lobster larvae (phyllosoma). In this study, sequences from zooplankton found associated with phyllosomas, along with sequences from GenBank, were used to design a suite of group-specific primers. These primers were able to amplify via the polymerase chain reaction (PCR) a short (100–200 base pair) DNA fragment from the 16S or COI locus of potential prey but not from lobster. These methods were applied to four wild-caught phyllosomas of Jasus edwardsii and two phyllosomas of Scyllarus sp. Z. Gadiforme, Cnidaria, Gastropoda and Decapoda crustacean (non-lobster) DNA sequences were obtained from the gut contents of these lobster larvae and inferred as prey. These initial results confirm previous studies using other less definitive methods which have indicated that phyllosomas are opportunistic predators of a wide range of zooplankton taxa.