Comparative Life Cycle Assessment of Two Types of Truck Bumper Produced in the Algerian Auto Industry

Currently, the reduction of weight in automotive is a very important topic to reduce the air pollution. In this context, the purpose of the present paper is to analyze a real case study through a comparison of the environmental impacts between a conventional steel bumper and a polyester prototype. In the first part of this work, a door-to-door life-cycle assessment methodology was used throughout the study of the component manufacturing phase. The SimaPro 7.1 software is used to evaluate the impacts of both bumpers on the environment and health. The second part is devoted to dust analysis from the polyester workshop. The obtained results have allowed us to show the company that its choice of steel substitution by the polyester is advantageous for certain impacts including the impact of climate change, but unfortunately there may be, given the working conditions of the polyester workshop, a transfer of impact, since we will end up with a risk of health (irritations, cancers) for the workers. LCA has proven to be a very useful tool for validating a redesigned automotive component from an environmental point of view; from this case study, several recommendations were made for the company to design environmentally friendly components, and ecodesign should be introduced into the company’s procedures.     

The introduction of Sargassum muticum modifies epifaunal patterns in a Moroccan seagrass meadow

Marine macrophytes sustain valuable epiphytic biodiversity. Nonindigenous macroalgae may induce changes in composition and structure of epifaunal assemblages and therefore support different assemblages from those associated with native species. In this study, differences in faunal community structure between the introduced fucoid Sargassum muticum and the native seagrass Cymodocea nodosa were tested over a year on an intertidal shallow sandy bottom at the southern introduction front, the El Jadida coastline (NW Morocco). Epifaunal community structure consistently differed between macrophytes through seasons, with more species‐rich assemblages associated with S. muticum than C. nodosa despite comparable abundances. The significantly greater epifauna diversity on S. muticum may be related to its structural complexity. However, the species contributing most to differences in assemblages between both macrophytes, such as Steromphala umbilicalis and S. pennanti, were found on both habitats with temporally varying abundances. Some species‐specific affinities were detected (Stenosoma cf. acuminatum, Elasmopus vachoni, Chauvetia brunnea). Nitrogen, dissolved oxygen, suspended matter and temperature were identified as the best explanatory variables contributing to the observed macroepifaunal patterns. This study provides evidence that S. muticum acts as a favourable and additional habitat for epifaunal species and supports a more diverse epifaunal assemblage in this Moroccan seagrass meadow.     

Homological relations: A methodology for the certification of irregular tessellations

In GIS, spatial analysis is based on the use of spatial operations such as testing the spatial relations between features. Often, such tests are invalidated by errors in datasets. It is a very common experience that two bordering regions which should obey the topological relation “meet” fall instead in the “overlap” category. The situation is exacerbated when applying topological operators to regions that come from different datasets, where resolution and error sources are different. Despite the problem being quite common, up to now no standard approach has been defined to deal with spatial relations affected by errors of various origins. Referring to topological relations, we define a model to extend the eight Egenhofer relations between two simple regions: we call them homological relations (H‐relations). We discuss how exact topological relations can be extracted from observed relations and discuss the case of irregular tessellations, where errors have the most impact on vector data. In the proposed case study within the domain of geographic crowdsourced data, we propose algorithms for identifying homological regions and obtaining a corrected tessellation. This methodology can be considered as a step for quality control and the certification of irregular tessellations.     

Temporal and depth distribution of microepiphytes on Posidonia oceanica (L.) Delile leaves in a meadow off Tunisia

A survey on the epiphytic microorganisms growing on Posidonia oceanica leaves was conducted along a depth transect along the coast of Eastern Tunisia (Mahdia). Samples were collected by SCUBA diving at depths of 3, 5, 10 and 12 m in July 2008 and January 2009. A total of 58 microepiphyte taxa were identified. Multivariate analyses revealed temporal and spatial variation of the abundance of epiphytic microalgae. Water motion, light availability, temperature and motility of species seem to be responsible of temporal and bathymetric variations of epiphytic microalgae. Unlike diatoms, dinoflagellates were more abundant in deep waters, suggesting that they are more vulnerable to hydrodynamics. The significant correlation between leaf area index and abundance of epiphytic species indicates that the phenological parameters of the host plant influence the abundance of the epiphytic microorganisms. Among the epiphytic dinoflagellates, our data showed a great number of potentially toxic species (Alexandrium minitum, Amphidinium carterae, Karenia selliformis, Coolia monatis, Karlodinium veneficum, Ostreopsis siamensis, Prorocentrum concavum, Prorocentrum minimum, Prorocentrum rathymum and Prorocentrum lima). These species were more abundant in the deep station under more sheltered conditions than found at inshore shallower stations, which are subjected to high water motion.     

Properties of geothermal resources in Kebilli region, Southwestern Tunisia

The Kebilli region is located in the Southwestern part of Tunisia, and is characterized by the presence of deep and shallow geothermal systems (continental intercalary and complex terminal). Chemical and isotopic contents are used to classify the type and determine the origin of thermal water. An evaluation of reservoir temperature and a possible geothermal fluid mixing are also carried out. Both continental intercalary-deep aquifer and complex terminal-shallow aquifer are of Na–(Ca)–Cl–(SO₄) mixed water type. The use of different geothermometers and the computation of saturation indexes for different solid phases suggests that the thermal reservoir temperature of the continental intercalary is between 92 and 105 °C, while the fluid temperature from the shallow complex terminal aquifer ranges from 50 to 75 °C. Also, the isotopic data indicates the old origin of all groundwater of Southwestern Tunisia. Mixing effects characterizing the continental intercalary and the complex terminal aquifers were identified using δ²H and δ¹⁸O relationship. It appears that the upward movement of thermal water from the deep aquifer to shallow ones is probably due to the abundant fractures in the research area.     

Investigation of active faults in Morocco using morphometric methods and drainage pattern analysis

A survey has been done of recently active faults in Morocco. In addition to field observations, morphometric methods were applied and an analysis was made of the drainage pattern. In the morphometric analysis, a map of vertical deformation was established from the elevations of summit level surfaces. This enables the recognition of neotectonic discontinuities and lithological contrasts; the actual discrimination of different rock-types can only be achieved by comparison with field observations. The analysis of drainage patterns — including their perturbations and anomalies — can also reveal the presence of features due to neotectonics, structural control or lithological variation. Certain faults can be detected which correspond to structures known from field geology or remote sensing (NE-SW and NW-SE oriented sets). Some new faults are observed which belong to these sets, as well as others which define a new N-S trending set. The present analysis leads to a distinction between ancient faults and currently active faults. The results of this study are shown on a map of recently active faults where the respective vertical displacements are also indicated.

---

Zusammenfassung Bei einer Untersuchung der heute aktiven Störungen in Marokko wurden zusätzlich zu Feldbeobachtungen morphometrische Untersuchungen sowie eine Analyse des Entwässerungsnetzes durchgeführt. Bei der morphometrischen Analyse wurde eine Karte der vertikalen Deformationen von Aufragungen aus den Gipfelfluren abgeleitet. Dadurch können neotektonische Diskontinuitäten sowie lithologische Kontraste erkannt werden; die wirkliche Unterscheidung verschiedener Gesteinstypen kann aber nur im Vergleich mit Feldbeobachtungen erreicht werden. Die Analyse des Gewässernetzes — auch seiner Komplikationen und Anomalien — kann gleichfalls Elemente aufdecken, welche neotektonischen Ursprungs bzw. strukturell bedingt oder aber auf lithologische Unterschiede zurückzuführen sind. Bestimmte Störungen korrespondieren mit Strukturen, die aus der Feldgeologie oder der Fernerkundung bekannt sind (NE/ SW- und NW/SE-gerichtete Scharen). Einige neu entdeckte Störungen gehören zu diesen Scharen, während andere ein neues, N/S-streichendes System deutlich machen. Die vorgelegte Analyse erlaubt, zwischen älteren und noch heute aktiven Störungen zu unterscheiden. Unsere Ergebnisse sind in einer Karte der aktiven Störungen zusammengefaßt, in die die vertikalen Versätze gleichfalls eingetragen wurden.

---

Résumé Un recensement des failles à jeu récent (néotectonique) a été fait sur l'ensemble du Maroc. Outre les observations de terrain, les méthodes de la morphométrie et celles de l'analyse du réseau hydrographique sont appliquées. En morphométrie, l'établissement d'une carte de la déformation verticale d'après la situation altimétrique de la surface sommitale permet la reconnaisance de structures (discontinuités) néotectoniques et d'alternances lithologiques (la discrimination ne peut être faite que sur le terrain). De même l'analyse du réseau hydrographique, de ses perturbations et de ses anomalies (cf. infra) met en évidence des discontinuités dues à la néotectonique, à la structure des terrains et à la lithologie. Les ensembles morphostructuraux marocains (Meseta, Rif, Atlas), ressortent nettement de la carte de synthèse. On y retrouve les failles connues par la géologie de terrain et par l'analyse des images satellitaires (ensembles de direction NE-SW et NW-SE), de nouvelles failles appartenant à ces deux familles, ainsi qu'un nouvel ensemble de failles de direction N-S. Cette analyse permet de distinguer failles actives et failles anciennes. Les résultats sont portés sur la carte des principales failles à jeu récent avec leurs rejets verticaux respectifs.

---

, , , , . . .. , , . , , , , , . , , , NE-SW NW-ES . , , . . , , , .

     

Adaptive state estimation of groundwater contaminant boundary input flux in a 2-dimensional aquifer

In many circumstances involving heat and mass transfer issues, it is considered impractical to measure the input flux and the resulting state distribution in the domain. Therefore, the need to develop techniques to provide solutions for such problems and estimate the inverse mass flux becomes imperative. Adaptive state estimator (ASE) is increasingly becoming a popular inverse estimation technique which resolves inverse problems by incorporating the semi-Markovian concept into a Bayesian estimation technique, thereby developing an inverse input and state estimator consisting of a bank of parallel adaptively weighted Kalman filters. The ASE is particularly designed for a system that encompasses independent unknowns and /or random switching of input and measurement biases. The present study describes the scheme to estimate the groundwater input contaminant flux and its transient distribution in a conjectural two-dimensional aquifer by means of ASE, which in particular is because of its unique ability to efficiently handle the process noise giving an estimation of keeping the relative error range within 10% in 2-dimensional problems. Numerical simulation results show that the proposed estimator presents decent estimation performance for both smoothly and abruptly varying input flux scenarios. Results also show that ASE enjoys a better estimation performance than its competitor, Recursive Least Square Estimator (RLSE) due to its larger error tolerance in greater process noise regimes. ASE’s inherent deficiency of being slower than the RLSE, resulting from the complexity of algorithm, was also noticed. The chosen input scenarios are tested to calculate the effect of input area and both estimators show improved results with an increase in input flux area especially as sensors are moved closer to the assumed input location.     

Assessment of future climate change impact on rainfed wheat yield in the semi-arid Eastern High Plain of Algeria using a crop model

Natural Hazards - Maintaining sustainability in rainfed wheat production under changing climate is a grave concern for food security in Algeria. This study aims to assess the impact of future...     

Tectonique quaternaire et plis de rampe dans le golfe d'Hammamet (offshore tunisien)

The Jriba trough is an Upper Miocene graben located within the Tunisian offshore Gulf of Hammamet area, east of the Atlas front. This distensive structure suffered a compressive event during the Early Quaternary (Villafranchian). The Jriba structure was previously interpreted as ‘flower structure’, which possibly complicated by halokinetics movements. A new analysis of a set of seismic lines crossing the Jriba trough allows us to propose a new tectonic model where the Villafranchian deformation is characterized by (1) occurrence of a decollement level cutting Messinian to Pliocene layers; and (2) the growth of fault-related folds (fault-propagation fold). The NE–SW Miocene, inherited normal faults, locate the position of the ramps and folds whereas the NW–SE inherited normal faults are reactivated as tear faults. These NW–SE tear faults define various domains of different shortening values (one kilometre at maximum). To cite this article: M. Ben Romdhane et al., C. R. Geoscience 338 (2006).