Lake sediment records on climate change and human activities since the Holocene in Erhai catchment,Yunnan Province,China

Climate of Yunnan Plateau is mainly controlledby the system of southwest Asian monsoon, and alsoaffected by westerlies and local climate of the Qing-hai-Tibet Plateau. Since the Cenozoic, a large numberof structural lake basins have formed with the uplift ofthe Qinghai-Tibet Plateau[1]. As the information aboutthe climate and environment change was faithfullydocumented in lake sediments, which have the char-acteristics of continuity, high resolution, abundant in-formation, lake sediments p…     

Functional equations in emitting atmospheres

Astrophysics and Space Science - Starting with the equation of transfer in a plane-parallel inhomogeneous atmosphere which emits and scatters radiation anisotropically, we obtain a set of...     

The variability of Magellanic cluster infrared stars

We report on the light variations of the infrared stars that were discovered recently in the Magellanic clusters NGC 419, 1783 and 1978. Their periods, of 528, 458 and 491 days, are among the longest known for carbon-rich Mira variables in the Clouds. All three IR stars were found to lie on the extension of the period– M _bol relation derived from the shorter-period C-rich Miras while they were 0.45–0.70 mag fainter than the extension of the period– M _K relation. Their main sequence masses were determined by isochrone fitting to be 1.5–1.6 M_⊙, consistent with the prediction of the evolutionary models of Vassiliadis & Wood.     

Mineralogical alteration of a type A CAI from Allende CV3 chondrite: Formation of secondary dmisteinbergite and its phase transition to anorthite

Dmisteinbergite, a hexagonal form of CaAl₂Si₂O₈, was found in a compact type A Ca-Al-rich inclusion (CAI) in the Allende CV3 chondrite. Scanning and transmission electron microscopic observations show that dmisteinbergite was always in contact with grossular and grossular was in contact with melilite. In addition, there is a crystallographic relationship between dmisteinbergite and anorthite. Based on the textural and crystallographic evidence, the following mineralogical alteration processes are proposed to have occurred in the CAI. (1) Melilite was replaced by grossular. High densities of vesicles in the grossular indicate that hydrogrossular might have been the primary alteration phase and dehydrated by later metamorphism. (2) Dmisteinbergite formed from (hydro)grossular through a reaction with Si-rich fluid. (3) Nano-sized minerals are formed within dmisteinbergite. (4) Dmisteinbergite was transformed to anorthite. (5) Both anorthite and dmisteinbergite were altered to nepheline. (6) Hydrogrossular was dehydrated to grossular. (Hydro)grossular, dmisteinbergite, anorthite, and nepheline in the CAI seem to have formed in the course of metasomatism that occurred in the Allende parent body. Except for the hydrogrossular dehydration, these reactions could have occurred at moderate temperature (200–250°C) in high pH fluids (pH 13–14) according to past experimental studies. Episodic changes in fluid composition seem to have occurred before reactions (2), (4), and (5), because these reactions were not completed before the next reaction started. Higher temperature is required for reactions (5) and (6) to occur. Our observation of the CAI suggests that it experienced multiple episodes of metasomatism as temperatures were rising in the Allende parent asteroid.     

Orbit determination of the SELENE satellites using multi-satellite data types and evaluation of SELENE gravity field models

The SELENE mission, consisting of three separate satellites that use different terrestrial-based tracking systems, presents a unique opportunity to evaluate the contribution of these tracking systems to orbit determination precision. The tracking data consist of four-way Doppler between the main orbiter and one of the two sub-satellites while the former is over the far side, and of same-beam differential VLBI tracking between the two sub-satellites. Laser altimeter data are also used for orbit determination. The contribution to orbit precision of these different data types is investigated through orbit overlap analysis. It is shown that using four-way and VLBI data improves orbit consistency for all satellites involved by reducing peak values in orbit overlap differences that exist when only standard two-way Doppler and range data are used. Including laser altimeter data improves the orbit precision of the SELENE main satellite further, resulting in very smooth total orbit errors at an average level of 18 m. The multi-satellite data have also resulted in improved lunar gravity field models, which are assessed through orbit overlap analysis using Lunar Prospector tracking data. Improvements over a pre-SELENE model are shown to be mostly in the along-track and cross-track directions. Orbit overlap differences are at a level between 13 and 21 m with the SELENE models, depending on whether 1-day data overlaps or 1-day predictions are used.     

The RCP greenhouse gas concentrations and their extensions from 1765 to 2300

We present the greenhouse gas concentrations for the Representative Concentration Pathways (RCPs) and their extensions beyond 2100, the Extended Concentration Pathways (ECPs). These projections include all major anthropogenic greenhouse gases and are a result of a multi-year effort to produce new scenarios for climate change research. We combine a suite of atmospheric concentration observations and emissions estimates for greenhouse gases (GHGs) through the historical period (1750?C2005) with harmonized emissions projected by four different Integrated Assessment Models for 2005?C2100. As concentrations are somewhat dependent on the future climate itself (due to climate feedbacks in the carbon and other gas cycles), we emulate median response characteristics of models assessed in the IPCC Fourth Assessment Report using the reduced-complexity carbon cycle climate model MAGICC6. Projected ??best-estimate?? global-mean surface temperature increases (using inter alia a climate sensitivity of 3°C) range from 1.5°C by 2100 for the lowest of the four RCPs, called both RCP3-PD and RCP2.6, to 4.5°C for the highest one, RCP8.5, relative to pre-industrial levels. Beyond 2100, we present the ECPs that are simple extensions of the RCPs, based on the assumption of either smoothly stabilizing concentrations or constant emissions: For example, the lower RCP2.6 pathway represents a strong mitigation scenario and is extended by assuming constant emissions after 2100 (including net negative CO₂ emissions), leading to CO₂ concentrations returning to 360 ppm by 2300. We also present the GHG concentrations for one supplementary extension, which illustrates the stringent emissions implications of attempting to go back to ECP4.5 concentration levels by 2250 after emissions during the 21^st century followed the higher RCP6 scenario. Corresponding radiative forcing values are presented for the RCP and ECPs.     

Flood monitoring, mapping and assessing capabilities using RADARSAT remote sensing, GIS and ground data for Bangladesh

Remote sensing is the most practical method available to managers of flood-prone areas for quantifying and mapping flood impacts. This study explored large inundation areas in the Maghna River Basin, around the northeastern Bangladesh, as determined from passive sensor LANDSAT data and the cloud-penetrating capabilities of the active sensors of the remote imaging microwave RADARSAT. This study also used passive sensor LANDSAT wet and dry images for the year 2000. Spatial resolution was 30 m by 30 m for comparisons of the inundation area with RADARSAT images. RADARSAT images with spatial resolution of 50 m by 50 m were used for frequency analysis of floods from 2000 to 2004. Time series images for 2004 were also used. RADARSAT remote sensing data, GIS data, and ground data were used for the purpose of flood monitoring, mapping and assessing. A supervised classification technique was used for this processing. They were processed for creating a maximum water extent map and for estimating inundation areas. The results of this study indicated that the maximum extent of the inundation area as estimated using RADARSAT satellite imaging was about 29, 900.72 km² in 2004, which corresponded well with the heavy rainfall around northeast region, as seen at the Bhairab Bazar station and with the highest water level of the Ganges–Brahmaputra–Meghna (GBM) Rivers. A composite of 5 years of RADARSAT inundation maps from 2000 to 2004, GIS data, and damage data, was used to create unique flood hazard maps. Using the damage data for 2004 and the GIS data, a set of damage maps was also created. These maps are expected to be useful for future planning and flood disaster management. Thus, it has been demonstrated that RADARSAT imaging data acquired over the Bangladesh have the ability to precisely assess and clarify inundation areas allowing for successful flood monitoring, mapping and disaster management.     

Assessment of nitrogen loading from the Kiso-Sansen Rivers into Ise Bay using stable isotopes

Concentrations of particulate organic nitrogen (PN), dissolved inorganic nitrogen (DIN), and their nitrogen isotope ratios (δ ¹⁵N) in the Kiso-Sansen Rivers were determined from monthly observations over the course of a year to assess variations in the form and sources of riverine nitrogen discharged into Ise Bay. The δ ¹⁵N values of NO₃ ⁻ observed in the Kiso-Sansen Rivers showed a logarithmic decreasing trend from 8 to 0‰, which varied with the river discharge, indicating mixing between point sources with high δ ¹⁵N and non-point sources with low δ ¹⁵N. The influence of isotope fractionation of in situ biogeochemical processes (mainly DIN assimilation by phytoplankton) on δ ¹⁵N of NO₃ ⁻ was negligible, because sufficient concentrations of NH₄ ⁺ for phytoplankton demand would inhibit the assimilation of NO₃ ⁻. A simple relationship between river discharge and δ ¹⁵N of NO₃ ⁻ showed that the fraction of total NO₃ ⁻ flux arising from point sources increased from 4.0–6.3% (1.1–1.8 tN day⁻¹) during higher discharge (>600 m³ s⁻¹) to 30.2–48.3% (2.6–4.1 tN day⁻¹) during lower discharge (<300 m³ s⁻¹). Riverine NO₃ ⁻ discharge from the Kiso-Sansen Rivers can explain 75% of the variations in surface NO₃ ⁻ at the head of Ise Bay over the year.     

Investigation of cutting methods for small samples of Hayabusa and future sample return missions

We report the investigation of cutting methods for Hayabusa samples. The purpose of our study is to explore the possibility of applying multiple analyses to a single particle effectively. We investigated the cutting performance of a blade dicing saw, laser, focused ion beam (FIB), and physical breaking by microindenter. Cutting performance was examined by estimating the aspect ratio of the cut slit, i.e., depth over width of the slit. We also investigated the possible contamination and sample damage by cutting. The result of the investigation shows that we can cut the samples from <50 μm to 500 μm using those methods with aspect ratios from 10 to 20, although they would introduce some contamination or damage to the samples. Our investigations also provide an important basis for the analysis of samples obtained by future sample return missions.     

Three‐dimensional microstructure of samples recovered from asteroid 25143 Itokawa: Comparison with LL5 and LL6 chondrite particles

In this study, the three‐dimensional (3‐D) microstructure of 48 Itokawa regolith particles was examined by synchrotron microtomography at SPring‐8 during the preliminary examination of Hayabusa samples. Moreover, the 3‐D microstructure of particles collected from two LL6 chondrites (Ensisheim and Kilabo meteorites) and an LL5 chondrite (Tuxtuac meteorite) was investigated by the same method for comparison. The modal abundances of minerals, especially olivine, bulk density, porosity, and grain size are similar in all samples, including voids and cracks. These results show that the Itokawa particles, which are surface materials from the S‐type asteroid Itokawa, are consistent with the LL chondrite materials in terms of not only elemental and isotopic composition of the minerals but also 3‐D microstructure. However, we could not determine whether the Itokawa particles are purely LL5, LL6, or a mixture of the two. No difference between the particles collected from Rooms A and B of the sample chamber, corresponding to the sampling sequence of the spacecraft's second and first touchdowns, respectively, was detected because of the statistically small amount of particles from Room B.