Preparation and Measurement of Cassiterite for Sn Isotope Analysis

Increased interest in the fractionation of Sn isotopes has led to the development of several techniques for preparing cassiterite (SnO₂, the primary ore of Sn) for isotopic analysis. Two distinct methods have been applied in recent isotopic studies of cassiterite: (a) reduction to tin metal with potassium cyanide (KCN) at high temperature (800 °C), with subsequent dissolution in HCl, and (b) reduction to a Sn solution with hydriodic acid (HI) at low temperature (100 °C). This study compares the effectiveness and accuracy of these two methods and contributes additional methodological details. The KCN method consistently yielded more Sn (> 70% in comparison with < 5%), does not appear to fractionate Sn isotopes at high temperatures over a 2‐hour period and produced consistent Sn isotope values at flux mass ratios of ≥ 4:1 (flux to mineral) with a minimum reduction time of 40 min. By means of a distillation experiment, it was demonstrated that HI could volatilise Sn, explaining the consistently low yields by this method. Furthermore, the distillation generated Sn vapour, which is up to 0.38‰ per mass unit different from the starting material, the largest induced Sn fractionation reported to date. Accordingly, the HI method is not recommended for cassiterite preparation for Sn isotopic analysis.     

Constraining the timing of porphyry mineralization in northwest Iran in relation to Lesser Caucasus and Central Iran; Re–Os age data for Sungun porphyry Cu–Mo deposit

The Neo-Tethyan subduction in Iran is characterized by the Urumieh–Dokhtar magmatic arc (UDMA), formed by northeast-ward subduction of the oceanic crust beneath the central Iran. This belt coincides with the porphyry copper metallogenic belt that comprises several metallogenic zones, including Ahar–Jolfa in northwest Iran. The Ahar–Jolfa metallogenic zone encompasses two main batholiths of Qaradagh and Sheyvardagh and numerous intrusive bodies of Cenozoic, which have produced many base and precious metal deposits and prospects. The former is considered as continuation of the Meghri–Ordubad pluton in South Armenian Block (SAB), which also hosts porphyry copper deposits (PCDs). The Sungun PCD is the largest occurrence in northwest Iran. Rhenium-Osmium ages of Sungun molybdenites are early Miocene and range between 22.9 ± 0.2 and 21.7 ± 0.2 Ma. Comparison of the ages obtained here with published ages for mineralization across the region suggests the following sequence. The earliest porphyry Cu–Mo mineralization event in northwest Iran is represented by Saheb Divan PCD of late Eocene age, which is followed by the second epoch of middle Oligocene, including the Cu–Mo–Au mineralization at Qarachilar and the Haftcheshmeh PCD. Mineralization in Sungun, Masjed Daghi, Kighal and Niaz deposits corresponds to the third mineralization event in northwest Iran. The first epoch in northwest Iran postdates all Eocene mineralizations in SAB, while the second epoch is coeval with Paragachay and the first-stage of Kadjaran PCDs. Its third epoch is younger than all mineralizations in SAB, except the second stage in Kadjaran PCD. Finally, the Cu mineralization epochs in northwest Iran are older than nearly all PCDs and prospects in Central Iran (except the Bondar Hanza PCD), altogether revealing an old to young trend along the UDMA and the porphyry Cu belt towards southeast, resulted from diachronous, later closure of the Neo-Tethyan oceanic basin in central and SE Iran.     

Estimating the seismic displacement of friction pendulum isolators based on non‐linear response history analysis

A procedure for developing equations that estimate the isolator displacement due to strong ground motion is applied to buildings isolated with the friction pendulum system. The resulting design equations, based on rigorous non‐linear analysis, offer an alternative to the iterative equivalent‐linear methods used by current U.S. building codes. The governing equations of the system are reduced to a form such that the median normalized displacement of the system due to an ensemble of ground motions is found to depend on only the isolation period—a function of the curvature of the isolator—and the friction force at incipient slip normalized by peak ground velocity. The normalization is effective in minimizing the dispersion of the normalized displacement for an ensemble of ground motions, implying that the median normalized displacement is a reliable estimate of response. The design equations reflect the significant (20 to 38%) increase in displacement when the excitation includes two lateral components of ground motion instead of just one component. Equivalent‐linear methods are shown to underestimate by up to 30% the exact median displacement determined by non‐linear response history analysis for one component of ground motion, and building codes include at most a 4.4% increase for a second component. Copyright © 2003 John Wiley & Sons, Ltd.     

The eccentric case of a fast-rotating,gravity-gradient-perturbed satellite attitude solution

A closed-form first-order perturbation solution for the attitude evolution of a triaxial space object in an elliptical orbit is presented. The solution, derived using the Lie–Deprit method, takes into account gravity-gradient torque and is facilitated by an assumption of fast rotation of the object. The formulation builds on the earlier implementation of Lara and Ferrer, which assumes a circular orbit. The previously presented work—which assumes spin about an object’s axis of maximum inertia—is further extended by the explicit presentation of the transformations required to apply the solution to an object spinning about its axis of minimum inertia. Additionally, several numerical analyses are presented to more completely assess the utility of the solution. These studies (1) validate the elliptical solution, (2) assess the impact of varying the small parameter of the perturbation procedure, (3) analyze the assumption of fast rotation, and (4) apply the solution to the common and important scenario of a tumbling rocket body.     

Response of low‐angle dunes to variable flow

Current understanding of bedform dynamics is largely based on field and laboratory observations of bedforms in steady flow environments. There are relatively few investigations of bedforms in flows dominated by unsteadiness associated with rapidly changing flows or tides. As a consequence, the ability to predict bedform response to variable flow is rudimentary. Using high‐resolution multibeam bathymetric data, this study explores the dynamics of a dune field developed by tidally modulated, fluvially dominated flow in the Fraser River Estuary, British Columbia, Canada. The dunes were dominantly low lee angle features characteristic of large, deep river channels. Data were collected over a field ca 1·0 km long and 0·5 km wide through a complete diurnal tidal cycle during the rising limb of the hydrograph immediately prior to peak freshet, yielding the most comprehensive characterization of low‐angle dunes ever reported. The data show that bedform height and lee angle slope respond to variable flow by declining as the tide ebbs, then increasing as the tide rises and the flow velocities decrease. Bedform lengths do not appear to respond to the changes in velocity caused by the tides. Changes in the bedform height and lee angle have a counterclockwise hysteresis with mean flow velocity, indicating that changes in the bedform geometry lag changes in the flow. The data reveal that lee angle slope responds directly to suspended sediment concentration, supporting previous speculation that low‐angle dune morphology is maintained by erosion of the dune stoss and crest at high flow, and deposition of that material in the dune trough.     

Analysis of COMPTEL gamma-ray burst locations and spectra

In its first three years of operation, the COMPTEL instrument on theCompton Gamma-Ray Observatory has measured the locations (mean accuracy 1°) and spectra (0.75-30 MeV) of 18 gamma-ray bursts and continues to observe new events at a rate of 1/month. With good angular resolution and sensitivity at MeV energies, the growing COMPTEL burst catalog is an important new piece of evidence in the on-going GRB mystery. The COMPTEL burst locations are consistent with an isotropic distribution of sources, yet the spatial coincidence of two of the bursts indicates the possibility of repetition. The COMPTEL burst spectra are in most cases consistent with a single power law model with spectral index in the range 2–3. However, two bursts show evidence of a spectral break in the MeV range. Measurement of rapid variability at MeV energies in the stronger bursts provides evidence that either the sources are nearby (within the Galaxy) or the gamma-ray emission is relativistically beamed. We present an overview of analysis results obtained from the COMPTEL burst catalog concentrating on the search for burst repetition and the implications of highly variable MeV emission.     

Harzburgite to lherzolite and back again: metasomatic processes in ultramafic xenoliths from the Wesselton kimberlite, Kimberley, South Africa

Garnets from phlogopite harzburgite xenoliths from the Wesselton kimberlite show zoning from low-Ca harzburgitic cores to rims with lherzolitic Ca-Cr relations. Garnet cores are depleted in Y and HREE, but have sinuous REE patterns enriched in the MREE. Rimwards increase in Ca and decrease in Cr and Mg is accompanied by increases in Zr, Y, Ti and HREE. Secondary replacement rims on some garnets consist of garnet with low Ca and Cr, but high Mg, Ti and HREE. The zoning, and the secondary replacement rims, are attributed to different stages of a metasomatic process that has converted harzburgite to lherzolite, at temperatures near 1000 °C. Modelling of zoning profiles suggests that the process can be divided into three parts: (a) Inwards diffusion of Ca, Zr and Y over periods of 10,000–30,000 years, from a fluid depleted in Ti, Ga and Y; (b) formation of overgrowths high in Ca, Zr, Y and Ti, followed by annealing over periods of several thousand years; (c) formation of secondary reaction rims of low-Ca garnet, on very short timescales prior to eruption. The sinuous REE patterns of the garnet cores are regarded as “primary” features reflecting an ancient metasomatic event superimposed on a depleted protolith. The high Zr/Y, Zr/Ti and Zr/Ca of the fluids corresponding to stage (a) are ascribed to the presence of phlogopite and garnet in the matrix near the fluid source (presumed to be a melt, possibly a kimberlite precursor), leading to the development of concentration fronts in the percolating fluid. The overgrowths of stage (b) appear to coincide with the precipitation of phlogopite in the rock. The low Ca of the fluid responsible for the secondary replacement rims of stage (c) may reflect the late precipitation of clinopyroxene or Ca-carbonate as part of the metasomatic assemblage. These processes have significantly modified the modal, major- and trace-element composition of the mantle volume sampled by the Wesselton kimberlite, within <1 Ma of eruption. Recognition of such effects and their distribution in time and space is essential to understanding of the evolution of the subcontinental lithospheric mantle. Received: 11 February 1998 / Accepted: 24 June 1998     

Assessing the response of watersheds to catastrophic (logging) and possible secular (global temperature change) perturbations using sediment-chemical chronologies

Geochemical profiles of sediment cores from two oligotrophic lakes (Elk and Mullett) in northern Lower Michigan were studied to examine the response and recovery of watersheds to large-scale logging that occurred between 1850 and 1920. Specific questions addressed were: can the impact of extensive clear-cutting of forests be recognized in the sediment-chemical chronologies, can states of system stability be identified prior to the logging, and are there indications that the systems are recovering and possibly returning to a stable state? To answer these questions, elements were put into four groups as proxies for watershed runoff or export (e.g., Al, Mg), pollution (e.g., Pb, Cu), redox (e.g., Fe, As), and productivity (e.g., Ca, P). It was observed that vertical patterns of all proxies were influenced by logging and the early increases in concentration of pollution proxies were due to increased watershed export, not pollution. System stability might be recognized by relatively symmetrical vertical patterns among all of the proxies or secular changes of slowly increasing or decreasing vertical concentration trajectories. Some pre-logging trajectories were punctuated by episodes of slightly elevated concentrations that appear to be related to comparatively warmer periods during the Little Ice Age. Iron and Mn enrichments caused by increased watershed runoff might be misinterpreted as paleo-redox horizons. Results are interpreted to indicate that (1) reference conditions may be better defined as the temporal trends among proxy groups and not individual concentrations, (2) simply assuming pre-1800 conditions as a reference may not be appropriate, (3) inter-proxy group comparisons are needed to help for interpretations of intra-proxy group patterns, (4) the possible regime shift identified here might be expected for other ecosystems because of the intensity of human disturbances and secular changes, and (5) without consideration of a possible regime shift, recovery from logging is estimated to be on the order of 75–130 a, but shorter if regime shifts are considered.     

Response of hybrid isolation system during a shake table experiment of a full‐scale isolated building

A full‐scale 5‐story steel moment frame building was subjected to a series of earthquake excitations using the E‐Defense shake table in August, 2011. For one of the test configurations, the building was seismically isolated by a hybrid system of lead‐rubber bearings and low friction roller bearings known as cross‐linear bearings, and was designed for a very rare 100 000‐year return period earthquake at a Central and Eastern US soil site. The building was subject to 15 trials including sinusoidal input, recorded motions and simulated earthquakes, 2D and 3D input, and a range of intensities including some beyond the design basis level. The experimental program was one of the first system‐level full‐scale validations of seismic isolation and the first known full‐scale experiment of a hybrid isolation system incorporating lead‐rubber and low friction bearings. Stable response of the hybrid isolation system was demonstrated at displacement demands up to 550 mm and shear strain in excess of 200%. Torsional amplifications were within the new factor stipulated by the code provisions. Axial force was observed to transfer from the lead‐rubber bearings to the cross‐linear bearings at large displacements, and the force transfer at large displacements exceeded that predicted by basic calculations. The force transfer occurred primarily because of the flexural rigidity of the base diaphragm and the larger vertical stiffness of the cross‐linear bearings relative to the lead‐rubber bearings.