Empirical Assessment of Ground Water–to-Indoor Air Attenuation Factors for the CDOT-MTL Denver Site

The area surrounding the Colorado Department of Transportation Materials Testing Laboratory in Denver was the subject of intense investigation, involving the collection of thousands of ground water, soil-gas, and indoor air samples in order to investigate indoor air impacts associated with a subsurface release of chlorinated solvents. The preremediation portion of that data set is analyzed and reduced in this work to ground water–to-indoor air attenuation factors (α_gw= the ratio of the measured indoor air concentration to the soil-gas concentration predicted to be in equilibrium with the local ground water concentration). The empirical α_gw values for this site range from about 10⁻⁶ to 10⁻⁴ with an overall average of 3 × 10⁻⁵ (μg/L indoor air)/(μg/L soil gas). The analysis of this data set highlights the need for a thorough data review and data screening when using large data sets to derive empirical relationships between subsurface concentrations and indoor air. More specifically, it is necessary to identify those parts of the data that contain a strong vapor intrusion pathway signal, which generally will require concentrations well above reported detection levels combined with spatial or temporal correlation of subsurface and indoor concentrations.     

Using GIS and Dispersion Modelling Tools to Assess the Effect of the Environment on Health

A feasibility study in progress to integrate health and air quality information is presented. The methods of using integrated GIS and air quality dispersion modelling tools to assess the effect of the environment on health are discussed. The main aim is to model human personal exposure to air pollutants and compare the predictions to respiratory health data for asthmatics in a health telematics project. The MEDICATE project develops and tests the feasibility of using a health telematic system for asthmatics. Key to this is the determination of the real-time health (lung function) response to the ambient environment. For this, air quality information is related to respiratory measurements by modelling personal exposure through a GIS. The methods of integrating environmental modelling and assessment tools (GIS) in this case are examined. ESRI's ArcView is used to locate and compile environmental information about the patients' locations and lifestyles in the study areas (London and Barcelona). A dispersion modelling extension to ArcView, ADMS Urban, is used to interrogate the spatial environmental databases (e.g. emission inventories) to model air pollution concentrations. Patients' personal exposure is modelled by time-weighted estimates of their exposure to ambient air quality at each defined location. Lung function data can be compared on a time-wise basis with these air quality indicators to see if there is a relationship on an hourly, daily or lagged-day basis. The aim of this paper is to propose a methodology and discuss the integration and practicalities of using air quality assessment tools (inventories, dispersion modelling and a GIS) in assessing the impacts of the environment on human health.     

Geographic signatures of North American West Coast estuaries

West Coast estuaries are geologically young and composed of a variety of geomorphological types. These estuaries range from large fjords to shallow lagoons; from large to low freshwater flows. Natural hazards include E1 Niños, strong Pacific storms, and active tectonic activity. West Coast estuaries support a wide range of living resources: five salmon species, harvestable shellfish, waterfowl and marine birds, marine mammals, and a variety of algae and plants. Although populations of many of these living resources have declined (salmonids), others have increased (marine mammals). West Coast estuaries are also centers of commerce and increasingly large shipping traffic. The West Coast human population is rising faster than most other areas of the U.S. and Canada, and is distributed heavily in southern California, the San Francisco Bay area, around Puget Sound, and the Fraser River estuary. While water pollution is a problem in many of the urbanized estuaries, most estuaries do not suffer from poor water quality. Primary estuarine problems include habitat alterations, degradation, and loss; diverted freshwater flows; marine sediment contamination; and exotic species introductions. The growing West Coast economy and population are in part related to the quality of life, which is dependent on the use and enjoyment of abundant coastal natural resources.     

Recognition of down-valley translation in tidally influenced meandering fluvial deposits,Athabasca Oil Sands (Cretaceous), Alberta,Canada

The vast Athabasca Oil Sands of Alberta, Canada has an estimated resource of more than 1.7 trillion barrels of bitumen in-place, the majority of which is hosted in the Lower Cretaceous McMurray Formation. Despite its economical significance the depositional environment of the formation, and particularly the middle part that is the primary reservoir in most areas, is still a matter of considerable debate. These strata of interest are widely known to comprise fluvial and estuarine point bar deposits that were subject to varying degrees of marine influence. The orientation of point bar strata from the formation is tabulated and the majority is observed to dip paleo-basinward, to the north. This observation has proven difficult to explain by geologists attempting to build predictive models for the formation over the last two decades. However, the basinward-dipping point bar strata can be attributed to widespread down-valley translation of point bars in confined north-south oriented valleys, which have previously been delineated in the region. Differentiating the deposits of lateral point bar migration and down-valley translation in the rock record is not possible at the facies scale, and thus translated point bars have not been previously recognized or interpreted in the rock record, despite their prevalence in numerous modern fluvial valley systems. Their identification in the McMurray Formation has important implications for the delineation and development of Canada’s economically significant oil sands resources.     

Which catchment characteristics control the temporal dependence structure of daily river flows?

Hydrological classification systems seek to provide information about the dominant processes in the catchment to enable information to be transferred between catchments. Currently, there is no widely agreed‐upon system for classifying river catchments. This paper develops a novel approach to classifying catchments based on the temporal dependence structure of daily mean river flow time series, applied to 116 near‐natural ‘benchmark’ catchments in the UK. The classification system is validated using 49 independent catchments. Temporal dependence in river flow data is driven by the flow pathways, connectivity and storage within the catchment and can thus be used to assess the influence catchment characteristics have on moderating the precipitation‐to‐flow relationship. Semi‐variograms were computed for the 116 benchmark catchments to provide a robust and efficient way of characterising temporal dependence. Cluster analysis was performed on the semi‐variograms, resulting in four distinct clusters. The influence of a wide range of catchment characteristics on the semi‐variogram shape was investigated, including: elevation, land cover, physiographic characteristics, soil type and geology. Geology, depth to gleyed layer in soils, slope of the catchment and the percentage of arable land were significantly different between the clusters. These characteristics drive the temporal dependence structure by influencing the rate at which water moves through the catchment and/or the storage in the catchment. Quadratic discriminant analysis was used to show that a model with five catchment characteristics is able to predict the temporal dependence structure for un‐gauged catchments. This method could form the basis for future regionalisation strategies, as a way of transferring information on the precipitation‐to‐flow relationship between gauged and un‐gauged catchments. © 2014 The Authors. Hydrological Processes by published by John Wiley & Sons, Ltd.     

Evidence for Increasing Indoor Sources of 1,2-Dichloroethane Since 2004 at Two Colorado Residential Vapor Intrusion Sites

Groundwater contamination associated with two former industrial facilities in Denver, Colorado, has led to concerns about vapor intrusion into residences adjacent to the facilities. 1,1,1-Trichloroethane (1,1,1-TCA), 1,1-dichloroethene (1,1-DCE), and trichloroethene (TCE) are the main contaminants of concern in groundwater, with trace levels of 1,2-dichloroethane (1,2-DCA) present at one of the sites. Indoor air monitoring programs have been ongoing at these two sites since 1998 and recent results have suggested that background, indoor source, 1,2-DCA has been increasing in the frequency of detection, and median and maximum concentration over the past several years. A lines of evidence evaluation was undertaken for both sites in order to document the predominance of indoor sources of 1,2-DCA. Evidence utilized included spatial evaluation of 1,2-DCA in indoor air; comparison of 1,2-DCA concentrations in mitigated and unmitigated homes; a phone survey to evaluate the potential for smoking to contribute to indoor air 1,2-DCA levels; evaluation of mitigation system effluent data; and an evaluation of volatile organic compound (VOC) ratios in groundwater and indoor air. The results of this evaluation indicated that smoking had no demonstrable influence on measured indoor air concentrations. In addition, it appears that consumer products have had a markedly increased influence on indoor air concentrations since 2005. Data from one of the industrial facilities at one of the sites also indicated that polyvinyl chloride (PVC) and vinyl composite floor adhesive used in a building remodel in 2005 apparently generated elevated levels of indoor 1,2-DCA and vinyl chloride, which have been sustained up to the present time.     

Chromium Augite - A New Microprobe Reference Sample

A microprobe reference sample was made from a portion of a large and homogeneous single crystal of augite which contains 0.85% of Cr₂O₃. The relatively high chromium content of this augite increases its usefulness as a microprobe reference sample.