Early Triassic potassic volcanism in the Afyon Zone of the Anatolides/Turkey: implications for the rifting of the Neo-Tethys

Afyon Zone, which was derived from the Anatolide–Tauride platform during closure of the Neo-Tethys, is made up of pre-Mesozoic basement and unconformably overlying Triassic–Early Tertiary cover series. The Afyon Zone contains widespread metavolcanic rocks, which are dominated by rhyolite, dacite, and trachyandesite. They form a distinct volcanic succession, which is separated from the underlying Silurian–Lower Carboniferous metacarbonates and meta-siliciclastics by a regional unconformity. Trachyandesitic metavolcanics are made up of massive lava flows, pyroclastics and epiclastics, less frequently, domes and dikes, which were developed on a deeply eroded subaerial landmass. U/Pb and Pb/Pb zircon geochronology yielded Lower Triassic (~250 Ma) ages, which are interpreted as extrusion age of trachyandesitic volcanics. Based on the stratigraphic, geochronological, and geochemical data, we suggest that these Lower Triassic magmatic rocks represent an extensional tectonic setting on the northern active margin of the Gondwana, which led to the development of the northern branch of the Neo-Tethys.     

Electron microscopic examination of hydrothermally treated bentonite clay

Water-saturated Na bentonite clay with a bulk density of 2 g/cm³ was autoclaved at 150 and 200°C for up to 0.5 years and then left to rest under confined conditions at room temperature for several weeks. Transmission electron microscopy with elemental micro-analysis was applied to study hydrothermally induced changes, which were found to have the form of particle reorganization and, at 200°C, release and precipitation of silica. The precipitations are suspected to be hydrated amorphous silica gels. The microstructural alteration, which was more obvious at 200°C than at 150°C, involved regrouping of previously dispersed and expanded stacks of montmorillonite flakes to yield dense branches of interwoven, contracted stacks separated by large voids.     

Juvenile slender tuna from New Zealand (note)

Two juvenile slender tuna Allothunnus fallai Serventy, 278 mm and 282 mm fork length, were identified from a catch by a purse seiner 23 km off the Moko Hinau Islands, New Zealand, on 23 January 1974. As the slender tuna were observed to school in association with skipjack tuna Katsuwonus pelamis L., it is probable that adults also school, and could be available as a yet unexploited resource to New Zealand fishermen, especially to the south‐east of New Zealand.     

Formation of mud clast breccias and the process of sedimentary autobrecciation in the hominin-bearing (Homo naledi) Rising Star Cave system,South Africa

Unconsolidated mud clast breccia facies in the hominin-bearing (Homo naledi) Rising Star Cave, Cradle of Humankind, South Africa, are interpreted to have formed through a process termed sedimentary autobrecciation in this study. This process, by which most of the angular mud clast breccia deposits are thought to have formed autochthonously to para-autochthonously via a combination of erosion, desiccation, diagenesis and microbial alteration of laminated mud deposits, is thought to have taken place under relatively dry (i.e. non-flooded) conditions inside the cave. Subsequently, gravitational slumping and collapse was the dominant mechanism that produced the mud clast breccia deposits, which commonly accumulate into debris aprons. The mud clast breccia is typically associated with (micro) mammal fossils and is a common facies throughout the cave system, occurring in lithified and unlithified form. This facies has not been described from other cave localities in the Cradle of Humankind. Additionally, sedimentary autobrecciation took place during the deposition of some of the fossils within the Rising Star Cave, including the abundant Homo naledi skeletal remains found in the Dinaledi Subsystem. Reworking of the mud clast breccia deposits occurs in some chambers as they slump towards floor drains, resulting in the repositioning of fossils embedded in the breccias as evidenced by cross-cutting manganese staining lines on some Homo naledi fossil remains. The formation of the unlithified mud clast breccia deposits is a slow process, with first order formation rates estimated to be ca 8 × 10⁻⁴ mm year⁻¹. The slow formation of the unlithified mud clast breccia facies sediments and lack of laminated mud facies within these deposits, indicates that conditions in the Dinaledi Chamber were probably stable and dry for at least the last ca 300 ka, meaning that this study excludes Homo naledi being actively transported by fluvial mechanisms during the time their remains entered the cave.     

Earthquake swarms at Upptyppingar,north-east Iceland: A sign of magma intrusion?

In 2007, intense swarms of deep, tectonic earthquakes, amounting to at least 5 300 epicentres, were detected near to Mount Upptyppingar, which forms part of the Kverkfjöll volcano system in Iceland’s Northern Volcanic Zone. Although micro-seismicity is common within such volcanic regions, the Upptyppingar swarms have been more intensive and persistent than any other deep-seated seismicity observed in Iceland. Here we outline the spatial and temporal changes in ongoing seismicity that began in February 2007; in addition, we document enhanced levels of GPS-derived crustal deformation, recorded within 25 km of the area of swarming. Besides displaying spatial clustering, the Upptyppingar micro-earthquakes are noteworthy because: (i) they concentrate at focal depths of 14–22 km; (ii) the swarms comprise brittle-type earthquakes < 2 in magnitude, yielding a b-value of 2.1; and (iii) several of the swarms originate at focal depths exceeding 18 km. Additionally, different parts of the affected region have exhibited seismicity at different times, with swarm sites alternating between distinct areas. The activity moved with time towards east-north-east and to shallower depths. Linear regression approximates the seismicity on a southward-dipping, ～41° plane. Alongside sustained earthquake activity, significant horizontal displacement was registered at two permanent GPS stations in the region. High strain rates are required to explain brittle fracturing under visco-elastic conditions within the Earth’s crust; similarly, intense, localised deformation at considerable depth is necessary to reconcile the measured surface deformation. Such remarkable seismicity and localised deformation suggests that magma is ascending into the base of the crust.     

Spatial patterns of sub-tidal seagrasses and their tissue nutrients in the Torres Strait,northern Australia: Implications for management

The distribution and nutritional profiles of sub-tidal seagrasses from the Torres Strait were surveyed and mapped across an area of 31,000 km². Benthic sediment composition, water depth, seagrass species type and nutrients were sampled at 168 points selected in a stratified representative pattern. Eleven species of seagrass were present at 56 (33.3%) of the sample points. Halophila spinulosa, Halophila ovalis, Cymodocea serrulata and Syringodium isoetifolium were the most common species and these were nutrient profiled. Sub-tidal seagrass distribution (and associated seagrass nutrient concentrations) was generally confined to northern-central and south-western regions of the survey area (<longitude 142.60), where mean water depth was relatively shallow (approximately 13 m below MSL) and where sediments were comprised primarily muddy sand to gravelly sand. Seagrass nitrogen and starch content, the most important nutrients for marine herbivores, were significantly correlated with species and with the plant component (above or below ground). For all seagrass species, the above-ground component (shoots and leaves) possessed greater nitrogen concentrations than the below-ground component (roots and rhizomes), which possessed greater starch concentrations. S. isoetifolium had the highest total nitrogen concentrations (1.40±0.05% DW). However, it also had higher fibre concentrations (38.2±0.68% DW) relative to the other four species. H. ovalis possessed the highest starch concentrations (2.76±0.12% DW) and highest digestibility (83.24±0.66% DW) as well as the lowest fibre (27.2±0.66% DW). The high relative abundance (found at 55% of the sites that had seagrass) and nutrient quality characteristics of H. ovalis make it an important source of energy to marine herbivores that forage sub-tidally in the Torres Strait. There were two regions in Torres Strait (north-central and south-western) where sub-tidal seagrass meadows were prevalent and of relatively higher nutritional value. This spatial and nutritional information can be used by local agencies to manage and to protect the ecological, economic and cultural values of the sub-tidal seagrass ecosystems and associated fisheries of the Torres Strait.     

Electrical conductivity of H-bearing orthopyroxene single crystals measured with impedance spectroscopy

In this study, the electrical conductivity of synthetic and natural orthopyroxene single crystals containing various amounts of hydrogen and cation impurities (i.e., Al, Fe) was investigated using impedance spectroscopy. A new cell was developed to measure conductivities of submillimeter-sized oriented single crystals with impedances up to 10¹⁰?Ohm. In contrast to previous studies on olivine and orthopyroxene, results from this study do not show a simple correlation of the concentration of protons and the electrical conductivity. Instead, the electrical conductivity appears to be a complex function of iron content, hydrogen content, crystal orientation and concentration of other impurity cations and shows similar activation energies to hydrogen diffusion. Model calculations considering proton conduction rather exclude than suggest orthopyroxene as responsible phase for high-conductivity regions in the Earth’s upper mantle.     

Ice fracturing during jökulhlaups: implications for englacial floodwater routing and outlet development

Theoretical studies of glacial outburst floods (jökulhlaups) assume that: (i) intraglacial floodwater is transported efficiently in isolated conduits; (ii) intraglacial conduit enlargement operates proportionally to increasing discharge; (iii) floodwater exits glaciers through pre‐existing ice‐marginal outlets; and (iv) the morphology and positioning of outlets remains fixed during flooding. Direct field observations, together with historical jökulhlaup accounts, confirm that these theoretical assumptions are not always correct. This paper presents new evidence for spatial and temporal changes in intraglacial floodwater routing during jökulhlaups; secondly, it identifies and explains the mechanisms controlling the position and morphology of supraglacial jökulhlaup outlets; and finally, it presents a conceptual model of the controls on supraglacial outbursts. Field observations are presented from two Icelandic glaciers, Skeiðarárjökull and Sólheimajökull. Video footage and aerial photographs, taken before, during and after the Skeiðarárjökull jökulhlaup and immediately after the Sólheimajökull jökulhlaup, reveal changes in floodwater routing and the positioning and morphology of outlets. Field observations confirm that glaciers cannot transmit floodwater as efficiently as previously assumed. Rapid increases in jökulhlaup discharge generate basal hydraulic pressures in excess of ice overburden. Under these circumstances, floodwater can be forced through the surface of glaciers, leading to the development of a range of supraglacial outlets. The rate of increase in hydraulic pressure strongly influences the type of supraglacial outlet that can develop. Steady increases in basal hydraulic pressure can retro‐feed pre‐existing englacial drainage, whereas transient increases in pressure can generate hydraulic fracturing. The position and morphology of supraglacial outlets provide important controls on the spatial and temporal impact of flooding. The development of supraglacial jökulhlaup outlets provides a new mechanism for rapid englacial debris entrainment. Copyright © 2000 John Wiley & Sons, Ltd.     

Strain parameters of discontinuities in rock for finite element calculation

The bulk strain induced by excavation of rooms for storage of highly radioactive waste is usually unimportant, but the change in aperture and shear displacement of permeable fractures may be of practical importance. Hence, the normal and shear of such discontinuities have to be considered and are commonly predicted by using special deformation moduli termed “normal” and “shear” stiffnesses in numerical calculations. For the use of some finite element methods, these have to be converted to compression and shear moduli ,which, in turn, requires that the thickness of the discontinuity is known. The normal and shear strain can be expressed in terms of soil mechanical parameters, yielding the compression modulus M and the shear modulus G, with the required form for finite element calculations. By definition they are functions of the normal and shear stiffness K_n and K_s. It is concluded that calculation of the normal and shear strain of discontinuities with clastic fillings by the use of finite element methods and deformation moduli derived from stiffness numbers is very uncertain except when the geometry of the weaknesses can be accurately defined.