Integrating Cavity Absorption Meter measurements of dissolved substances and suspended particles in ocean water

We have developed a new device to measure the separate contributions to the spectral absorption coefficient due to a pure liquid, due to the particles suspended in it, and due to the substances dissolved in it. This device, the Integrating Cavity Absorption Meter (ICAM), is essentially independent of scattering effects in the sample. In April 1993, a prototype of the ICAM was field tested on board the research vessel USNS Bartlett. A major part of the cruise track included criss-crossing the area where the Mississippi flows into the Gulf of Mexico at various ranges from the mouth of the river; thus samples were collected from areas of blue, green, and brown/black water. We evaluated 35 seawater samples collected with 5-l Niskin bottles from 22 locations to determine absorption spectra (380–700 nm) of suspended particles and dissolved substances (gelbstoff). Results validate the ICAM as a viable tool for marine optical absorption research. Gelbstoff absorption at 432.5 nm ranged from 0.024 to 0.603 m⁻¹. Over the spectral region 380→560 nm, gelbstoff absorption by each of the samples could be accurately fit to a decaying exponential. The particle absorption spectra are generally characteristic of those of phytoplankton and exhibit a local maximum at 430–440 nm. Absorption values at 432.5 nm ranged from zero to 1.0 m⁻¹. Some samples with moderate particulate absorption, however, did not show the characteristic local maximum of phytoplankton in the blue and instead resembled the characteristic decaying exponential of detritus with a shape similar to that observed in the gelbstoff. The ratio of gelbstoff to particulate absorption at 432.5 nm ranged from 0.46 to 152.     

Cross-Media Models of the Chesapeake Bay Watershed and Airshed

A continuous, deterministic watershed model of the Chesapeake Bay watershed, linked to an atmospheric deposition model is used to examine nutrient loads to the Chesapeake Bay under different management scenarios. The Hydrologic Simulation Program - Fortran, Version 11 simulation code is used at an hourly time-step for ten years of simulation in the watershed. The Regional Acid Deposition Model simulates management options in reducing atmospheric deposition of nitrogen. Nutrient loads are summed over daily periods and used for loading a simulation of the Chesapeake estuary employing the Chesapeake Bay Estuary Model Package. Averaged over the ten-year simulation, loads are compared for scenarios under 1985 conditions, forecasted conditions in the year 2000, and estimated conditions under a limit of technology scenario. Limit of technology loads are a 50%, 64%, and 42% reduction from the 1985 loads in total nitrogen, total phosphorus, and total suspended solids, respectively. Urban loads, which include point source, on-site wastewater disposal systems, combined sewer overflows, and nonpoint source loads have the highest flux of nutrient loads to the Chesapeake, followed by crop land uses.on assignment from NOAA Air Resources Laboratory     

Tectonically induced change in lake evolution recorded by seismites in the Eocene Green River Formation,Wyoming

Seismogenic sedimentary structures – seismites – provide an opportunity to understand the effects of syndepositional tectonics on lacustrine sedimentation. The lowermost Wilkins Peak Member (Eocene Green River Formation, Wyoming, USA) contains laterally extensive intervals displaying folds, load structures, mixed brittle–ductile deformation, microfaults, breccias and sedimentary dykes, which formed intrastratally in a low‐energy, sublittoral lacustrine environment. They developed in situ by liquefaction and plastic or brittle behaviour of semi‐lithified sediment, or by remobilization and injection of granular material. Their morphological attributes and lateral extent, zonation in deformation intensity and the depositional setting all imply deformation triggered by earthquake‐induced stresses in shallow‐buried sediment. Their stratigraphic distribution coincides with a shift in hydrological conditions from a balanced‐filled to an underfilled lake type, independent of climate change. This study is the first to ascribe seismites to a pulse of tectonic activity that caused a synchronous change in lacustrine evolution.     

Interactions between tides and other frequencies in the Indonesian seas

Interactions of tidal constituents and the transfer of energy from the tidal frequencies to other frequencies are investigated using 3-D tidal simulations for the Indonesian seas, focusing on an area of active internal tides. Semidiurnal tides strongly affect diurnal tides; however, semidiurnal tides are essentially unaffected by diurnal tides. The semidiurnal and diurnal constituents interact with each other through non-linear interference, both destructive and constructive. Semidiurnal tides generate harmonics at nearly the diurnal frequency and higher vertical wavenumbers. In Ombai Strait, these harmonics are out of phase with the diurnal tides and interact destructively with the diurnal tides, effectively negating the diurnal response in some locations. However, this is not a general response, and interactions differ between locations. Energy is also transferred from both semidiurnal and diurnal tides to other frequencies across the spectrum, with more energy originating from semidiurnal tides. These energy transfers are not homogeneous, and the spectral responses differ between the Makassar and Ombai Straits, with the region east of Ombai showing a more active surface response compared to a more intense benthic response in Makassar. In deep water away from topography, velocity spectra generally follow the Garrett–Munk (GM) relation. However, in areas of internal tide generation, spectral density levels exceed GM levels, particularly between 4 and 8 cycles per day (cpd), indicating increased non-linear interactions and energy transfer through resonant interactions. The model indicates strong surface trapping of internal tides, with surface velocity spectra having significantly higher energy between 4 and 8 cpd even 100 km away from the prominent sill generating the internal tides.     

Contribution of hydrodynamic conditions during shallow water stages to the sediment balance on a tidal flat: Mont-Saint-Michel Bay, Normandy, France

Field measurements were conducted in Mont-Saint-Michel Bay, a megatidal embayment (spring tidal range of 15 m), in order to monitor, over the course of a tidal cycle, sediment transport variability due to waves and tides on the upper part of a tidal flat characterised by shallow water depths. Sensors used to measure currents, water depth and turbidity were installed just above the bed (0.04 m). Two experiments were conducted under contrasting hydrodynamic conditions. The results highlight wave activity over the tidal flat even though observed wind waves were largely dissipated due to the very shallow water depths. Very high suspended sediment concentrations (up to 6 kg/m³) were recorded in the presence of wave activity at the beginning of the local flood, when significant sediment transport occurred, up to 7 times as much as under conditions of no wave activity. This influence may be attributed to the direct action of waves on bed sediments, to wave-induced liquefaction, and to the erosive action of waves on tidal channel banks. The sediment composition, comprising a clay fraction of 2-5%, may also enhance sediment transport by reducing critical shear stress through the sand lubrication effect. The results also show that antecedent meteorological conditions play an important role in suspended sediment transport on the tidal flat. Total sediment flux directions show a net transport towards the inner part of the bay that contributes to deposition over the adjacent salt marshes, and this tendency also prevails during strong wave conditions. Such sediment transport is characterised by significant variability over the course of the tidal cycle. During fair and moderate weather conditions, 83% and 71% of the total flux was observed, respectively, over only 11% and 28% of the duration of the local tidal cycle and with water depths between 0.04 and 0.3 m. These results suggest that in order to improve our understanding of sediment budgets in this type of coastal environment, it is essential to record data just at the beginning and at the end of tidal submergence close to the bed.     

Future projections of temperature-related climate change impacts on the railway network of Great Britain

Great Britain’s main line railway network is known to experience various temperature-related impacts, e.g. track buckling and overhead power line sag at high ambient temperatures. Climate change could alter the frequency of occurrence of these impacts. We have therefore investigated the climate change impact on various temperature-related issues, identified during workshops with rail industry specialists, using a perturbed physics ensemble (PPE) of the Met Office’s regional climate model (RCM), HadRM3. We have developed novel approaches to combine RCM data with railway industry knowledge, typically by identifying key meteorological thresholds of interest and analysing exceedance of these out to the 2040s. We performed a statistical analysis of the projected changes for each issue, via bootstrapping of the unperturbed PPE member. Although neither the PPE nor the bootstrapping analysis samples the full range of uncertainty in the projections, they nonetheless provide complementary perspectives on the suitability of the projections for use in decision-making. Our main findings include projected increases in the summertime occurrence of temperature conditions associated with (i) track buckling, (ii) overhead power line sag, (iii) exposure of outdoor workers to heat stress, and (iv) heat-related delays to track maintenance; and (v) projected decreases in the wintertime occurrence of temperatures conditions associated with freight train failure owing to brake problems. For (i), the statistical significance varied with track condition and location; for (ii) and (iii), with location; and for (iv) and (v), projected changes were significant across Great Britain. As well as assessing the changes in climate-related hazard, information about the vulnerability of the network to past temperature-related incidents has been summarised. Combining the hazard and vulnerability elements will eventually support a climate risk assessment for the industry.     

Late Miocene lacustrine sedimentation in the Mytilinii Basin,Samos Island,Greece

The Mytilinii Basin, eastern Samos Island, Greece, is one of many basins that developed in southeastern Europe during the Upper Neogene. The oldest lacustrine portion is of Late Miocene age, and besides tuffs, includes bituminous limestones, marlstones, dolostones and porcelanites of the Pythagorion Formation, and the limestones and diatomites of the overlying Hora Beds. Younger sedimentary rocks of Turolian through Pliocene age partially covered the Pythagorion Formation and Hora Beds (PFHB). Diatom floras range from well preserved to highly corroded and from sparse to abundant. The main taxa include Cyclotella aegaea, C. aegaea var. pythagoria, an unidentified Cyclotella and Nitzschia frustulum, and less common Epithemia turgida, E. reichelti, Synedra ulna, Tryblionella granulata, Encyonema silesiaca, Diploneis ovalis and Cocconeis placentula. Chrysophyte cysts, Hydrobia molluscs and trace fossils occur sporadically. The environmental evolution of the PFHB can be divided into three major stages. Fluctuating shallow to deeper waters in a saline lake characterized Stage A. Saline lake and playa environments with evidence for frequent earthquake events in the form of convolute bedding, drape folds and brecciated sediments characterized Stage B. During Stage C, the lake may have partially or completely split into two separate lakes. In the southeast, a saline playa passed laterally into a deeper-water lake. Locally, fresher-water ponds occurred. Subsequently, a deeper, possibly oligotrophic lake developed. In contrast, a saline lake with abundant diatoms formed in the northwest of the basin, in which diatom blooms led to whiting events and deposition of carbonate laminae. Cyclotella dominated the early floras in this water body, with later assemblages being co-dominated by Cyclotella and Nitzschia frustulum, possibly reflecting seasonal changes. Sedimentation was terminated by uplift and (or) increasing aridity associated with the Messinian Salinity Crisis.