Benthic Community Structure and Sediment Properties in Barnegat Bay,New Jersey,Before and After Hurricane Sandy

Hurricane Sandy was an extraordinarily large storm that affected most of the eastern coast of the USA in October 2012. To assess this storm’s impact, the benthic invertebrate community structure and sediment properties were compared in samples collected 3.5 months prior to (July 2012) and 8 months after (July 2013) the hurricane at 97 locations in Barnegat Bay, New Jersey, USA. Barnegat Bay is a shallow back-barrier estuary just north of where Sandy made landfall. For all locations taken together, sediment total nitrogen concentration was lower afterwards, while total organic carbon and total phosphorus concentrations were similar. Sediment median particle size was the same before and after, but the sediment was better sorted after the storm. There were no differences in total abundance of invertebrates, species richness, species diversity, or the abundance of polychaetes, bivalves, or gastropods. Malacostracan crustaceans were more abundant after Sandy (average 82 (0.04 m²)^?1) than they were before (average 64), due almost entirely to increased abundance of ampeliscid amphipods, which showed a shift toward smaller sizes in 2013. Annelids in the order Clitellata were on average less abundant after the hurricane (17) than before (53). The apparent minimal effect of Sandy on the benthic community in Barnegat Bay was probably because the passage of the hurricane had no detectable effects on salinity or dissolved oxygen concentrations throughout the bay.     

Dissolution of calcitic marble and dolomitic rock in high iron concentrated acid mine drainage: application to anoxic limestone drains

Oxidation of sulphide mining waste can generate acid mine drainage (AMD) that has the potential to seriously affect the ecosystems. Acid mine drainage is characterised by a high acidity, high concentrations of sulphates and metals. To reduce the environmental impacts due to AMD, neutralisation using limestone drains is an option proposed in the literature and used around the world. The present study focuses on the influence of the carbonate rock mineralogy and their particle size on the neutralising capacity. The tests were performed in two different anoxic conditions: in batch reactors, and in columns having a hydraulic retention time of 15?h. The results showed that the neutralisation capacity of calcite was more important than for dolomitic rock, and smaller particle size gave higher alkalinity production (fine calcite dissolved faster in contact with AMD). A characterization of metal precipitate in sludge and in limestone coating was performed and demonstrated that gypsum, lepidocrocite and goethite were the predominant secondary minerals to be formed. Finally, this study underlines that anoxic limestone drain cannot be used alone to treat high iron concentrated AMD.     

Oxide minerals in lithic fragments from Luna 20 fines

One hundred and seventy-six oxide mineral grains in the Luna 20 samples were analyzed by electron microprobe. Spinel is the most abundant oxide, occurring in troctolite fragments. Next most abundant is ilmenite, which occurs in all rock types except those containing spinel. Chromite also occurs in all rock types except those containing spinel. Minor amounts of ulvöspinel, armalcolite, zirkelite, baddeleyite and an unidentified TiO₂-rich phase were also found.Spinel grains are predominantly spinel-hercynite solid solutions, commonly with very minor chromite. The $\text{Fe}\text{(Fe + Mg)}$ ratio is generally lower than in spinel from Apollo 14 rocks. Chromites in non-mare rocks are similar to those from mare rocks. Ilmenite of mare origin is Mg-poor and Zr-rich compared to non-mare ilmenite; these elements may therefore be useful in determining the origin of ilmenite grains.Phase equilibria considerations suggest that spinel troctolite crystallized from a melt high in alumina; a likely candidate is the high-alumina basalt of Prinzet al. (1973a).Sub-micron wide rods of metallic Fe occur in plagioclase grains and may have formed by sub-solidus reduction processes.     

A lunar core of Fe-Ni-S

Several workers have proposed that lunar samples were magnetized by a field created by a lunar core of molten Fe. Low abundances of siderophile elements in lunar rocks are compatible with formation of a metallic lunar core. A molten Fe core requires that the bulk of the Moon was above, or close to, the melting point, a requirement which disagrees with most models of the lunar thermal regime.A core (or perhaps a layer or pockets) of molten Fe-Ni-S, at or close to the eutectic composition would act as a lunar dynamo, and be at a temperature (approx. 1000°C) consistent with some reasonable models of lunar thermal history. The existence of a Fe-Ni-S core would also partly explain the depletion in volatile elements in lunar basalts. Such a core, occupying up to 20 per cent of the Moon's radius requires a bulk S content for the moon of only 0.3 wt per cent.     

The lunar crust: a product of heterogeneous accretion or differentiation of a homogeneous Moon?

The outer portion of the Moon including the Al-rich crust and the source regions of mare basalts was either accreted heterogeneously or was the product of widespread differentiation of an originally homogeneous source. A number of constraints make the heterogeneous accretion model unlikely; the differentiation model appears more plausible.If the differentiation model is correct, a series of cumulate rocks complimentary to the Al-rich crustal rocks must exist. The mare basalts may have been derived from such a complimentary cumulate for several reasons. For example, Philpottset al. (1973) on the basis of REE studies, suggest that Apollo 11 and 17 mare basalts were formed by partial melting of a cumulate rich in a phase(s) containing high Ti and heavy REE. The high Ti of Apollo 11 and 17 basalts is not readily explained in terms of partial melting of an undifferentiated mantle, but is consistent with partial melting of a pyroxene cumulate enriched in Fe, Ti oxides. The characteristic Fe-rich nature of mare basalts would be partly a consequence of melting of oxide cumulate minerals. It is postulated that the plagioclase-poor source region of mare basalts was enriched in an intercumulus residual liquid. During the partial melting that produced mare basalts, this material was largely incorporated into the melt, thus explaining the ancient model ages observed in most mare basalts. If the cumulate model is correct, then samples derived from the true (undifferentiated) lunar mantle have not been identified.     

6: Classification of VMS deposits: Lessons from the South Uralides

VMS deposits of the South Urals developed within the evolving Urals palaeo-ocean between Silurian and Late Devonian times. Arc-continent collision between Baltica and the Magnitogorsk Zone (arc) in the south-western Urals effectively terminated submarine volcanism in the Magnitogorsk Zone with which the bulk of the VMS deposits are associated. The majority of the Urals VMS deposits formed within volcanic-dominated sequences in deep seawater settings. Preservation of macro and micro vent fauna in the sulphide bodies is both testament to the seafloor setting for much of the sulphides but also the exceptional degree of preservation and lack of metamorphic overprint of the deposits and host rocks. The deposits in the Urals have previously been classified in terms of tectonic setting, host rock associations and metal ratios in line with recent tectono-stratigraphic classifications. In addition to these broad classes, it is clear that in a number of the Urals settings, an evolution of the host volcanic stratigraphy is accompanied by an associated change in the metal ratios of the VMS deposits, a situation previously discussed, for example, in the Noranda district of Canada.Two key structural settings are implicated in the South Urals. The first is seen in a preserved marginal allochthon west of the Main Urals Fault where early arc tholeiites host Cu–Zn mineralization in deposits including Yaman Kasy, which is host to the oldest macro vent fauna assembly known to science. The second tectonic setting for the South Urals VMS is the Magnitogorsk arc where study has highlighted the presence of a preserved early forearc assemblage, arc tholeiite to calc-alkaline sequences and rifted arc bimodal tholeiite sequences. The boninitc rocks of the forearc host Cu–(Zn) and Cu–Co VMS deposits, the latter hosted in fragments within the Main Urals Fault Zone (MUFZ) which marks the line of arc-continent collision in Late Devonian times. The arc tholeiites host Cu–Zn deposits with an evolution to more calc-alkaline felsic volcanic sequences matched with a change to Zn–Pb–Cu polymetallic deposits, often gold-rich. Large rifts in the arc sequence are filled by thick bimodal tholeiite sequences, themselves often showing an evolution to a more calc-alkaline nature. These thick bimodal sequences are host to the largest of the Cu–Zn VMS deposits.The exceptional degree of preservation in the Urals has permitted the identification of early seafloor clastic and hydrolytic modification (here termed halmyrolysis sensu lato) to the sulphide assemblages prior to diagenesis and this results in large-scale modification to the primary VMS body, resulting in distinctive morphological and mineralogical sub-types of sulphide body superimposed upon the tectonic association classification.It is proposed that a better classification of seafloor VMS systems is thus achievable using a three stage classification based on (a) tectonic (hence bulk volcanic chemistry) association, (b) local volcanic chemical evolution within a single edifice and (c) seafloor reworking and halmyrolysis.     

The Rhenohercynian passive margin of SW England: Development,inversion and extensional reactivation

The SW England Rhenohercynian passive margin initiated with rift-related non-marine sedimentation and bimodal magmatism (Late Lockhovian). Continued lithospheric extension resulted in the exhumation of mantle peridotites and limited seafloor spreading (Emsian-Eifelian). Variscan convergence commenced during the Late Eifelian and was coeval with rifting further north. Collision was marked by the Early Carboniferous emergence of deep marine sedimentary/volcanic rocks from the distal continental margin, oceanic lithosphere, pre-rift basement and upper plate gneisses (correlated with the Mid-German Crystalline High of the Saxothuringian Zone). Progressive inversion of the passive margin was strongly influenced by rift basin geometry. Convergence ceased in the Late Carboniferous and was replaced by an extensional regime that reactivated basin controlling/thrust faults and reorientated earlier fabrics (Start-Perranporth Zone). The resultant exhumation of the lower plate was accompanied by emplacement of the Early Permian SW England granites and was contemporaneous with upper plate sedimentary basin formation above the reactivated Rhenohercynian suture. The Rhenohercynian passive margin probably developed in a marginal basin north of the Rheic Ocean or, possibly, a successor basin following its closure. The Lizard ophiolite is unlikely to represent Rheic Ocean floor or associated forearc (SSZ) crust. The Rheic and Rhenohercynian sutures may be coincident or the Rheic suture may be located further south in the Léon Domain.     

Formation of silica oncoids around geysers and hot springs at El Tatio, northern Chile

Siliceous oncoids, up to 4 cm in diameter, are common on the laterally extensive sinter aprons that surround the spectacular geysers and hot springs at El Tatio in northern Chile. Many of these complex oncoids developed close to geyser and spring vents that discharge boiling water. Internally the oncoids, which are composed of precipitated amorphous silica, are formed of complex arrays of spicules and concentric laminae as well as detrital volcanic grains. Spicular growth is dominant in most examples. The formation and growth of the spicules and concentric laminae were mediated by a microbial community which included filamentous microbes, mucus, and possibly bacteria. The microbes and mucus were silicified by replacement and encrustation. In some laminae the filamentous microbes lay parallel to the growth surface; in other laminae most filaments forming the thin mats were suberect. Amorphous silica precipitated between the filaments occluded porosity and commonly disguised the microbial fabric. The oncoids grew on the proximal sinter aprons around the geyser vents and hot spring pools. Most growth took place subaerially with the silica delivered to the precipitation sites by splashing water from the geysers and/or periodic shallow flooding of the discharge aprons. Unlike silica oncoids at other geothermal sites, vertical growth of oncoids that formed in some rimstone pools was not limited by water depth.     

The ups and downs of “Tectonic Quiescence”—recognizing differential subsidence in the epicontinental sea of the Oxfordian in the Swiss Jura Mountains

Recent studies in northern Switzerland have shown that epicontinental areas thought to have been tectonically stable during the Mesozoic were not necessarily as rigid as presumed. By comparing Oxfordian facies boundaries and depocenters in their palinspastic position with known faults in the basement, a direct relationship between the two can be demonstrated. Previously, the lack of obvious synsedimentary tectonic features has lulled scientists into believing that the realm of the Swiss Jura was tectonically stable during the Mesozoic. However, it can be shown that facies and sedimentary structures are largely influenced by tectonics. Subsurface data provide evidence for the presence of Paleozoic troughs in the basement which, apparently, were prone to reactivation during the Pan-European stress-field reorganization taking place in the Late Jurassic. This led to differential subsidence along pre-existing lineaments within the study area, which can be recognized in the distribution of Oxfordian epicontinental basins and their coeval shallow-water counterparts. Eustatic sea-level fluctuations played an important role in the development of shallow-water facies patterns, but a subordinate role in the control of accommodation space in basins.

While tectonic activity is often recorded in the sedimentary record in the form of platform break-ups and associated sedimentary debris, more subtle indicators may be overlooked or even misinterpreted. Sedimentary structures and isopach maps, as well as subsurface data in the study area suggest that subtle synsedimentary tectonic movements led to the formation of two shallow, diachronous epicontinental basins during the Late Jurassic. It becomes possible to recognize and differentiate the combined effects of local and regional tectonism, eustasy and sedimentation.