Calibration of regional pollen data to construct maps of former forest types in southern Sweden

A method was developed to construct maps of former forest types based on regional pollen data in southern Sweden. The considered species were Alnus, Betula, Carpinus, Corylus, Fagus, Fraxinus, Juniperus, Picea, Pinus, Populus, Quercus, Salix, Tilia and Ulmus. A network of 37 regional pollen sites with high data quality from lakes and peat deposits were selected from Sweden south of 60 ° N. Pollen percentage values were calculated and converted into estimates of tree composition. For controlling the reliability of the reconstruction, the estimates from the core-tops were compared with present day forest inventory data, and local pollen diagrams were compared with the regional pollen diagrams. An inverse distance weighted interpolation algorithm was used to generate maps for each tree species distribution at 2000 BP, 1500 BP, 1000 BP, 500 BP and 0 BP. A supervised classification routine was implemented to generate nine different forest types common to the five studied time intervals. The maps show that the amounts and patterns of distribution of the species and the forest types have varied in a significant but systematic manner through time. The changes are due to human activities, migrational patterns and changes in climate. These maps will be of value as a basis for future landscape planning, forestry and conservation of biodiversity.This is the 20th in a series of papers published in this special AMQUA issue. These papers were presented at the 1994 meeting of the American Quaternary Association held 19–22 June, 1994, at the University of Minnesota, Minneapolis, Minnesota, USA. Dr Linda C. K. Shane served as guest editor for these papers.     

Statewide Estimates of Undiscovered Deposits of Gold,Silver, Copper,Lead, and Zinc

Estimates of the number of undiscovered deposits on a statewide basis offer a different perspective on the nation's undiscovered resources of gold, silver, copper, lead, and zinc. Mean estimates of the number of undiscovered deposits statewide were extracted from the estimates of undiscovered deposits nationwide. More than 50 undiscovered deposits are estimated to occur in Alaska, Arizona, Nevada, and Wisconsin. Estimating the number of undiscovered deposits statewide serves as a measure of a state's total remaining mineral resources in known conventional deposit types.     

Private rights,public benefits: Industry-driven seabed protection

New Zealand has a large exclusive economic zone (EEZ) that contains a variety of marine habitats and commercially-important species. The commercial fishing industry operating within New Zealand's EEZ is of significant value to the economy and fisheries resources are managed through the extensive use of Individual Transferable Quotas (ITQs). One of the benefits of ITQs has been to better align some of the private incentives of quota owners with the public interest. These incentives contributed to an initiative proposed by the fishing industry to close large areas of New Zealand's EEZ to protect the seabed from trawling. These closed areas are termed benthic protection areas (BPAs) and protect the benthic biodiversity of about 1.1 million square kilometres of seabed—approximately 30% of New Zealand's EEZ. A significant proportion of New Zealand's known seamounts and active hydrothermal vents are protected by these closed areas. We describe and discuss the criteria used to select BPAs and some of the criticism of this marine protection initiative. We argue that the assignment of strong property rights in fishing resources was an important precondition to an industry initiative that has a significant public benefit. Where private and public interests are well aligned, government can adopt an enabling and facilitation role, ceding direct control of processes in order to get the results the align with the public interest.     

Acute toxicity of bromochlorinated seawater to selected estuarine species with a comparison to chlorinated seawater toxicity

The acute toxicity of bromochlorinated estuarine water (ca. 20%) was determined for several estuarine organisms. The most sensitive species were oysters (Crassostrea virginica, larvae and juveniles) and copepods (Acartia tonsa) with 48-h LC₅₀'s of 0·10 to 0·21 mg BrCl/litre. Palaemonetes pugio was most tolerant with a 96-h LC₅₀ of 0·70 mg BrCl/litre. The fish species tested (Menidia menidia, Brevoortia tyrannus and Leiostomus xanthurus) all had a 96-h LC₅₀ of 0·21–0·23 mg BrCl/litre.The BrCl toxicity data are compared with Cl₂ toxicity data for the same species. When the LC₅₀'s are expressed as equivalents per litre, BrCl is found to be two to four times less toxic than Cl₂. The ranking of species in terms of sensitivity is the same for both disinfectants.Some data are provided concerning the decay rates of BrCl and Cl₂ in estuarine water. BrCl was found to decay more rapidly than Cl₂ at higher ammonia levels (0·25 mg NH₄-N/litre). The question of chemical speciation is discussed with particular reference to the differential toxicities.     

Regional variation in springtime ichthyoplankton assemblages in the northeast Pacific Ocean

The coastal regions of the northeast Pacific support large, economically valuable fishery resources and provide nursery areas for many fish species. Over the last few decades, there have been dramatic shifts in species abundance and composition in this area. In this paper, we examine the springtime spatial patterns in the ichthyoplankton of three oceanographically different regions, the Southeast Bering Sea, the Gulf of Alaska and the U.S. West Coast. The data examined are a subset of a larger database (comprising data from cruises conducted from 1972 to 1997) that is being used to investigate spatial, seasonal and interannual patterns in ichthyoplankton of the northeast Pacific in relation to environmental conditions. Ichthyoplankton were collected during seven cruises using 60-cm bongo nets. Spatial patterns of ichthyoplankton were examined using both classification and ordination techniques. Relative Bray-Curtis dissimilarity coefficients calculated from the log₁₀ (n+1) of abundance data were used as input to the numerical classification of species and stations. Nonmetric multidimensional scaling was also applied to the abundance data to examine geometric patterns in the data. The numerical analyses of the species abundance data sets for each cruise revealed spatial patterns in the ichthyoplankton that suggest the occurrence of geographically distinct assemblages of fish larvae in each region. For all three sampling regions, the assemblage structure is primarily related to bathymetry, and Shelf, Slope, and Deep-Water assemblages are described. This shallow to deep-water gradient in species occurrence and abundance reflects the habitat preference and spawning location of the adult fish. Another degree of complexity is superimposed on this primary assemblage structure in each region and seems to be related to local topography and the prevailing current patterns. The patterns in ichthyoplankton assemblages of the three regions in the northeast Pacific Ocean described here form the basis for future investigations of spatial and temporal patterns in the ichthyoplankton of the subarctic Pacific.Regional Index Terms: Northeast Pacific Ocean, Southeast Bering Sea, Gulf of Alaska, U.S. West Coast.     

Potential implications of differential preservation of testate amoeba shells for paleoenvironmental reconstruction in peatlands

Testate amoebae are now commonly used in paleoenvironmental studies but little is known of their taphonomy. There is some experimental evidence for differential preservation of some testate amoeba shell types over others, but it is unclear what, if any impact this has on palaeoenvironmental reconstruction. To investigate this issue we looked at palaeoecological evidence for the preservation of different shell types. We then investigated the possible impact of selective preservation on quantitative palaeoenvironmental inference. We first used existing palaeoecological data sets to assess the vertical patterns of relative abundance in four testate amoeba shell types: (1) shells made of secreted biosilica plates (idiosomes, e.g. Euglypha), (2) idiosomes with thick organic coating (Assulina), (3) proteinaceous shells (e.g. Hyalosphenia), (4) shells built from recycled organic or mineral particles (xenosomes) (e.g. Difflugia, Centropyxis). In three diagrams a clear pattern of decay was only observed for the idiosome type. In order to assess the implications of differential preservation of testate amoeba taxa for paleoenvironmental reconstruction we then carried out simulations using three existing transfer functions and a wide range of scenarios, downweighting different test categories to represent the impact of selective test decomposition. Simulation results showed that downweighting generally reduced overall model performance. However downweighting a shell type only produced a consistent directional bias in inferred water table depth where that shell type is both dominant and shows a clear preference along the ecological gradient. Applying a scenario derived from previous experimental work did not lead to significant difference in inferred water table. Our results show that differential shell preservation has little impact on paleohydrological reconstruction from Sphagnum-dominated peatlands. By contrast, for the minerotrophic peatlands data-set loss of idiosome tests leads to consistent underestimation of water table depth. However there are few studies from fens and it is possible that idiosome tests are not always dominant, and/or that differential decomposition is less marked than in Sphagnum peatlands. Further work is clearly needed to assess the potential of testate amoebae for paleoecological studies of minerotrophic peatlands.     

Numerical analyses of deformability tests in jointed rock — “Joint Perturbation” and “No Tension” Finite Element solutions

SummaryNumerical Analyses of Deformability Tests in Jointed Rock — Joint Perturbation and No Tension Finite Element Solutions Sound design of structures in or upon rock requires a thorough knowledge of the rock mass deformability. Field test data interpretation has generally relied upon analytical or Finite Element linear elastic solutions. However, when testing in jointed rock, these can no longer be readily used since the medium cannot resist the tension induced upon loading. Accordingly, other solutions are required. If the discontinuities of the rock mass can all be mapped and their surface properties determined, the Finite Element model will use a Joint Perturbation solution where the joint elements have variable stiffnesses to account for movements along the fractures. If the discontinuities cannot be satisfactorily mapped, a global approach is provided by a No Tension analysis of the stress transfer type. The two techniques are compared in the case of bore hole jack deformability tests and found to agree remarkably well, indicating an appreciable difference from results of linear elasticity.

---

ZusammenfassungNumerische Analyse von Verformungsversuchen in geklüfteten Fels — Lösungen mittels Kluft-Perturbation und No Tension Analysis auf Grund der Methode der Finiten Elemente Der Entwurf von Bauwerken in oder auf Fels erfordert eine genaue Kenntnis des Formänderungsverhaltens der Felsmasse. Im allgemeinen basiert die Interpretation der Ergebnisse von Feldversuchen auf den Lösungen des zugehörigen Randwertproblems der linearen Elastostatik mittels klassischer analytischer Methoden oder der Methode der Finiten Elemente. Wenn die Versuche aber in geklüftetem Fels durchgeführt werden, müssen die theoretischen Methoden modifiziert werden, da das Medium keine Zugspannungen aufnehmen kann. Zwei Fälle können unterschieden werden. Erstens: die Kluftflächen der Felsmasse können geometrisch erfaßt und ihre Oberflächeneigenschaften können bestimmt werden; in diesem Falle kann die Finite-Elemente-Lösung eine Kluft-Perturbations-Methode verwenden, in welcher spezielle Kluft-Elemente verschiedener Steifigkeiten normal und tangential zu den Kluftflächen die Bewegungen entlang derselben bestimmen. Zweitens: die Diskontinuitäten der Felsmasse können nicht hinreichend beschrieben werden; für diesen Fall ist vorgekehrt durch die Finite-Element-Analyse vom Typ der Spannungsumlagerung unter Ausschaltung der Zugspannungen (No Tension Analysis), um das globale Verhalten der geklüfteten Felsmasse zu erfassen. Die Lösungen dieser beiden Methoden wurden für den Fall der Bohrloch-Verformungs-Tests verglichen; der Vergleich zeigt ausgezeichnete Übereinstimmung, im Gegensatz zu den Lösungen als lineares Elastizitätsproblem.

---

RésuméLa méthode des Eléments Finis appliquée aux résultats d'essais de vérins cylindriques dans les roches fissurées — solutions dites Joint Pertubé et Sans Traction La construction de structures sur ou dans des roches nécessite une connaissance approfendie de la déformabilité du massif rocheux. L'analyse des résultats d'essais en place se fait généralement à l'aide de solutions analytiques ou par Eléments Finis, qui supposent une élasticité linéaire du milieu. De fait, dans les roches fissurées, ces solutions sont inadéquates puisque le milieu ne peut résister aux sollicitations de traction. Il s'agit donc d'utiliser d'autres méthodes d'analyse. Lors qu'il est possible de déterminer la géométrie et les propriétés de toutes les discontinuités, l'on pourra utiliser une solution par Eléments Finis, dite Joint Perturbé dans laquelle la rigidité de surface du joint (ou fissure) peut varier lorsque des movements prennent place au niveau du joint. Si cela est impossible, il faudra utiliser une approche globale dite Sans Traction qui redistribue les contraintes de traction et les dissipe. On compare ces deux types de solutions dans le cas des essais de vérins cylindriques unidirectionnels. Leurs résultats sont identiques et ont nettement différents de ceux obtenus avec une solution élastique linéaire.

---

---

Research supported by the National Aeronautics and Space Administration — Contract NAS 8-21432.

---

With 8 Figures     

Summary of Conference

The recent apparition of comet Hale-Bopp has provided the first opportunity to study a truely “Great Comet” with modern observational equipment, from ground and from space. An enormous amount of data was gathered and is still in the process of being analysed. When compared with elaborate and realistic theoretical considerations, important new insights are now being obtained into the complex physical and chemical processes in the cometary environment. This summary highlights some of the main achievements of this work, as they were presented at the first major international conference on comet Hale-Bopp in February 1998. This revised version was published online in July 2006 with corrections to the Cover Date.     

Chemical abundances in a UV-selected sample of galaxies

We discuss the chemical properties of a sample of UV-selected intermediate-redshift  (0≲z≲0.4)  galaxies in the context of their physical nature and star-formation history. This work represents an extension of our previous studies of the rest-frame UV-luminosity function (Treyer et al.) and the star-formation properties of the same sample (Sullivan et al.) . We revisit the optical spectra of these galaxies and perform further emission-line measurements restricting the analysis to those spectra with the full set of emission lines required to derive chemical abundances. Our final sample consists of 68 galaxies with heavy-element abundance ratios and both UV and CCD B -band photometry. Diagnostics based on emission-line ratios show that all but one of the galaxies in our sample are powered by hot, young stars rather than by an AGN. Oxygen-to-hydrogen (O/H) and nitrogen-to-oxygen (N/O) abundance ratios are compared with those of various local and intermediate-redshift samples. Our UV-selected galaxies span a wide range of oxygen abundances, from ∼0.1 to 1 Z_⊙, intermediate between low-mass H  ii galaxies and massive starburst nuclei. For a given oxygen abundance, most have strikingly low N/O values. Moreover, UV-selected and H  ii galaxies systematically deviate from the usual metallicity–luminosity relation in the sense of being more luminous by  2–3 mag  . Adopting the 'delayed-release' chemical evolution model, we propose our UV-selected sources are observed at a special stage in their evolution, following a powerful starburst that enriched their ISM in oxygen and temporarily lowered their mass-to-light ratios. We discuss briefly the implications of our conclusions on the nature of similarly selected high-redshift galaxies.