The osmium isotopic composition of convecting upper mantle deduced from ophiolite chromites

Chromites separated from the upper mantle or lower crustal portions of 18 ophiolites ranging in age from 900 Ma to 50 Ma are examined for Re-Os isotopic systematics. The ophiolites include both MORB and back arc types, although most are from supra-subduction zone (SSZ) settings. The chromites are robust indicators of the initial Os isotopic compositions of the systems sampled. There is very limited range in calculated initial γ_Os values, with the entire group averaging +1.31. Least squares linear regression of the age of chromite formation (in Ga) versus initial ¹⁸⁷Os/¹⁸⁸Os of a filtered suite yields a slope of −0.0058±0.0019 (2σ) and a present day intercept of 0.12809±0.00085 (2σ), equivalent to a γ_Os value of +0.9±0.6. Of the suite of 51 samples analyzed, 68% lie within ±1% of this evolution trajectory.Although most of the samples formed in SSZ environments, there is little evidence to suggest modification of the mantle Os isotopic composition via radiogenic melts or fluids derived from subducting slabs. The ophiolite data are interpreted as representative of the convecting upper mantle and suggest that the present isotopic composition of the convecting upper mantle averages approximately 1.2% less radiogenic than the estimated minimum composition of the primitive upper mantle of 0.1296±8 (Meisel et al., 2001). The most likely explanation for the difference is the formation, subduction and isolation of some portion of the mafic oceanic crust. Using models based on the assumption that the convecting upper mantle comprises 50% of the total mass of the mantle, and that the average isolation period for subducted oceanic crust is 1.5 to 2.0 Ga, it is estimated that approximately 2 to 3% of the total mass of the mantle is composed of subducted mafic oceanic crust that remains isolated from the convecting upper mantle. Because the isotopic compositions of the DMM and PUM overlap within uncertainties, however, the results do not require any isolated slab component.     

Impact of suboxia on sinking particulate organic carbon: Enhanced carbon flux and preferential degradation of amino acids via denitrification

Fluxes of particulate organic carbon (POC) through the oxygen deficient waters in the eastern tropical North Pacific were found to be relatively less attenuated with depth than elsewhere in the eastern North Pacific. The attenuation coefficient (b) for the flux was found to be 0.40 versus the composite value of 0.86 determined by Martin et al. (1987). To examine this further, sinking POC was collected using sediment traps and allowed to degrade in oxic and suboxic experiments. Using a kinetic model, it was found that degradation proceeded at similar rates (roughly 0.8 day⁻¹) under oxic and suboxic conditions, but a greater fraction of bulk POC was resistant to degradation in the suboxic experiments (61% vs. 23%). Amino acids accounted for 37% of POC collected at 75m, but following degradation the value dropped to 17% and 16% in the oxic and suboxic experiments respectively. POC collected from 500m was 10% amino acids. The non-AA component of POC collected at 75m was not degraded under suboxic conditions, while under oxic conditions it was. These results suggest that microbes degrading OC under suboxic conditions via denitrification preferentially utilize nitrogen-rich amino acids. This preferential degradation of amino acids suggests that 9% more nitrogen may be lost via water column denitrification than is accounted for when a more “Redfieldian” stoichiometry for POC is assumed.     

Isotopic partitioning between scallop shell calcite and seawater: effect of shell growth rate

The relationship between molluscan shell growth rate and skeletal δ¹⁸O and δ¹³C was investigated in a detailed field study for the scallop, Pecten maximus. Seasonal variation in shell growth rate was found to be a governing factor influencing shell δ¹⁸O and δ¹³C. At low shell growth rates, shell δ¹⁸O were more positive (of the order +0.4‰) and δ¹³C more negative (up to −2‰) as compared with predicted values for precipitation of inorganic calcite in isotopic equilibrium with seawater. The deviations in δ¹⁸O were hypothesized as reflecting possible differences in solution carbonate chemistry at the site of mineralization in the extrapallial fluid as compared with that of the external seawater medium. The deviations in shell δ¹³C were consistent with incorporation of isotopically depleted respiratory ¹³C (i.e., a metabolic effect). A trend toward more depleted shell δ¹⁸O and δ¹³C values occurred at higher shell growth rates, with negative δ¹⁸O values as compared with predicted equilibrium at shell growth rates above 0.13 mm per day. These simultaneous negative deviations in skeletal δ¹⁸O and δ¹³C were interpreted as resulting from a kinetic effect. The implications for environmental reconstruction from molluscan isotopic records are discussed in light of a model of isotopic behavior based on the findings of the study.     

Multiple stressors in an estuarine system: Effects of nutrients, trace elements, and trophic complexity on benthic photosynthesis and respiration

The effects of nutrients, trace elements, and trophic complexity on benthic photosynthesis and respriation were studied in the Paxtuxent River estuary near St. Leonard, Maryland. Experiments were conducted over three years (1995–1997) in mesocosms containing riverine sediment and water. The experimental design was 2×2×3 factorial with two levels of nutrients (ambient and + nutrients), two of trace elements (ambient and + trace elements) and three of trophic complexity (plankton, plankton + fish, and plankton + fish + benthos). Trace elements included arsenic (As), copper (Cu), and cadmium (Cd). The experiment was conducted three times in 1995 and 1997 and four times in 1996. In 1995 and 1996, sediments were muddy, while in the final year sediments were sandy. In mesocoms with sandy sediments, nutrient additions increased benthic photosynthesis overall, while trace element additions increased benthic photosynthesis in two of three experimental runs. Benthic photosynthesis in these mesocosms appeared to be related to nitrogen loading. Benthic respiration increased in nutrient and trace element amended mesocosms with sandy sediments, apparently in response to higher benthic photosynthesis. Increasing trophic complexity, particularly the presence of benthic organisms, also increased benthic respiration in mesocosms with sandy sediments. There were no effects of nutrient or trace element additions on benthic photosynthesis and respiration when the sediments were muddy. The lack of consistent responses to nutrient additions was surprising given that benthic respiration rates (and presumably nutrient regeneration) were similar in all three years, regardless of sediment type. Muddy, sediments did not mask, the effects of nutrient addition by supplying more nutrients to benthic microalgae than sandy sediments. In 1996, the presence of filter feeding bivalves increased the relative heterotrophy of sediments, measured as production: respiration. Consistent with increased heterotrophy, effluxes of ammonium and soluble reactive phosphorus from sediments were greater in mesocosms containing benthic organisms. Anthropogenically-induced changes in estuaries, such as loading of nutrients and trace elements or reduced trophic complexity, can have important effects on benthic processes and potentially pelagic processes through feedback mechanisms.     

Integrated Two-Dimensional Modeling of Fluid Flow and Compaction in a Sedimentary Basin

In this paper we employ mixed finite elements and numerically study an integrated two-dimensional model of fluid flow and compaction in a sedimentary basin. This model describes a single phase incompressible flow in a two-dimensional section of a sedimentary basin with vertical compaction. At each time step, an iterative algorithm is used to solve this model. The determination of the grid movement is based on the mass conservation and movement of sediments in the basin, while the mixed method is utilized to solve the fluid flow over the moving grid. Numerical experiments are presented to verify this iterative algorithm and show representative solutions for the model under consideration.     

Determining Q of near-surface materials from Rayleigh waves

High-frequency (≥2 Hz) Rayleigh wave phase velocities can be inverted to shear (S)-wave velocities for a layered earth model up to 30 m below the ground surface in many settings. Given S-wave velocity (V_S), compressional (P)-wave velocity (V_P), and Rayleigh wave phase velocities, it is feasible to solve for P-wave quality factor Q_P and S-wave quality factor Q_S in a layered earth model by inverting Rayleigh wave attenuation coefficients. Model results demonstrate the plausibility of inverting Q_S from Rayleigh wave attenuation coefficients. Contributions to the Rayleigh wave attenuation coefficients from Q_P cannot be ignored when Vs/V_P reaches 0.45, which is not uncommon in near-surface settings. It is possible to invert Q_P from Rayleigh wave attenuation coefficients in some geological setting, a concept that differs from the common perception that Rayleigh wave attenuation coefficients are always far less sensitive to Q_P than to Q_S. Sixty-channel surface wave data were acquired in an Arizona desert. For a 10-layer model with a thickness of over 20 m, the data were first inverted to obtain S-wave velocities by the multichannel analysis of surface waves (MASW) method and then quality factors were determined by inverting attenuation coefficients.     

The Skeptical Environmentalist: A Sociocultural Perspective

Bjorn Lomborg's critique of environmentalism has been praised by The Economist as ‘right’ on its main points and ‘just’ in its criticism of much green activism, and damned by Scientific American as a ‘failure’ in its purpose of describing the state of the world. Most of the debate has centred on Lomborg's treatment of environmental issues. But the book is about more than the environment, and its flaws extend beyond his use and interpretation of the data. This revised version was published online in July 2006 with corrections to the Cover Date.     

Drainage, sediment transport, and denudation rates on the Nanga Parbat Himalaya, Pakistan

The Nanga Parbat Himalaya presents some of the greatest relief on Earth, yet sediment production and denudation rates have only been sporadically addressed. We utilized field measurements and computer models to estimate bank full discharge, sediment transport, and denudation rates for the Raikot and Buldar drainage basins (north slope of Nanga Parbat) and the upper reach of the Rupal drainage basin (south slope).The overall tasks of determining stream flow conditions in such a dynamic geomorphic setting is challenging. No gage data exist for these drainage basins, and the overall character of the drainage basins (high relief, steep flow gradients, and turbulent flow conditions) does not lend itself to either ready access or complete profiling.Cross-sectional profiles were surveyed through selected reaches of these drainage basins. These data were then incorporated into software (WinXSPRO) that aids in the characterization (stage, discharge, velocity, and shear stress) of high altitude, steep mountain stream conditions.Complete field measurements of channel depths were rarely possible (except at several bridges where the middle of the channel could actually be straddled and probed) and, when coupled with velocity measurements, provided discrete points of field-measured discharge calculations. These points were then used to calibrate WinXSPRO results for the same reach and provided a confidence level for computer-generated results.Flow calculations suggest that under near bank full conditions, the upper Raikot drainage basin produces discharges of 61 cm and moves about 11,000 tons day⁻¹ (9980 tons day⁻¹) of sediment through its channel. Bank full conditions on the upper portion of the Rupal drainage basin generate discharges of 84 cm and moves only about 3800 tons day⁻¹ (3450 tons day⁻¹) of sediment. Although the upper Rupal drainage basin moves more water, the lower slope of the drainage basin (0.03) generates a much smaller shear stress (461 Pa) than does the higher slope (0.12) of the upper Raikot drainage basin (1925 Pa).Dissolved and suspended sediment loads were measured from water/sediment samples collected throughout the day and night over a period of 10 days at the height of the summer melt season but proved to be a minor variable in transport flux. Channel bed loads were measured using a pebble count method of bank material and then used to generate ratings curves of bed loads relative to discharge volumes. When coupled with discharge data and basin area, mean annual sediment yield and denudation rates for Nanga Parbat are produced. Denudation rates calculated in this fashion range from 0.2 mm year⁻¹ in the slower, more sluggish Rupal drainage basin to almost 6 mm year⁻¹ in the steeper, faster flowing Raikot and Buldar drainage basins.