The Swedish Geotechnical Society’s methodology for risk management: a tool for engineers in their everyday work

The Swedish Geotechnical Society has adopted a general methodology for risk management in geotechnical engineering projects to reduce the costs related to negative outcomes of geotechnical risks. This technical note highlights the main features of the methodology and strives to inspire the international geotechnical community to apply sensible risk management methods. In the authors’ opinion, a successful geotechnical risk management needs to be structured, be tailored to the project, and permeate the engineers’ everyday work. Then, sufficient quality can be achieved in the project with larger probability.     

The Holocene paleolimnology of Lake Sämbosjön,southwestern Sweden

The Holocence paleolimnology of Lake Sämbosjön is described using geochemical and diatom analyses. The objective of this study is the reconstruction of major changes in trophic state and productivity, and to interpret the major causative processes. The accumulation of organic matter indicates a relatively high productivity in early Holocene, and the diatom analysis indicates a relatively high trophic state and pH. A succeeding decrease in productivity and trophic state and lowering in pH is recorded from about 8000 BP. If lake development had been primarily edaphically conditioned, viz. determined by nutrient supply from catchment soils, such a progressive oligotrophication would represent the common development of temperate lakes. Between about 6000 BP and 4000 BP Lake Sämbosjön was characterized by relatively stable productivity and pH. From about 4000 BP the analyses reveal an increase again in trophic state, productivity, and in pH. This eutrophication, which continued throughout the late Holocene, was caused by an exceptionally strong human influence on the catchment of Lake Sämbosjön. The increased supply of nutrients from cleared and deforested catchment soils changed the trophic state and provided the basis for increased lake productivity.     

Strengthening ties in production systems. Two approaches exemplified by the Volvo case

The effects of corporate efforts to reduce tied-up capital is exemplified by the production system of Volve cars. Two approaches are applied. The first one shows how Volvo gradually integrated production units into the system, through takeovers and new establishments. The second one discusses the integration of one particular process, the body assembly, against varying technologies and contracts of cooperation between the two companies involved.     

Suspension and calibration of a sediment trap

The aim of this technical note is to introduce a new, simple construction of a buoy-carried, suspended sediment trap that meets given demands concerning design (geometry of vessels) and stability during the registration period. The device is based on a ball-and-socket joint in the center and two Plexiglas cylinders (D=5cm, H=30cm) on PVC plastic arms. The suspension consists of only three parts. To determine the optimal construction, the apparatus has been calibrated in a circulating flume at various water velocities.     

Earthquake data analysis: An example from Sweden

Methods and results of earthquake data analysis are illustrated by the seismicity of Sweden in the period 1951–1976, summarizing a comprehensive research project for the past five years. Starting from the regional structural properties, methods are given for the evaluation of instrumental and macroseismic observations, including error analysis and source identification. The resulting earthquake distribution is investigated in relation to space (various types of seismicity mapping), time (periodicities) and magnitude (frequency-magnitude and energy-magnitude relations). The tectonophysical explanations of the earthquake origin are still subject to considerable uncertainty and can be treated only by way of discussions. The engineering applications, stimulated recently by the nuclear power industry, can be placed on much more reliable ground. They include calculations of seismic risk and fracture risk as well as investigations of certain phenomena of practical consequences, especially rockbursts.This review is primarily addressed to those who have use for seismological data in their work, especially geologists, tectonophysicists and engineers. It is important for them to realize how the seismological data are obtained, their reliability and their range of application. Sweden is here mainly used as an example, but the developed methods have a general applicability to any earthquake region, with proper modifications.In short, our purpose is two-fold: (1) to summarize recent research on the seismicity of Sweden: (2) to introduce all users of seismological data into methods and results.     

Influence of Temporal Variations in River Discharge, pH, Alkalinity and Ca on the Speciation and Concentration of Heavy Metals in Some Mining Polluted Rivers

Dissolved (dialysis in situ) and total concentrations ofCu, Zn, Cd and Al in eight mining polluted rivers in the Røros area, central Norway, were determinedby atomic absorption spectrometry (flame and graphite furnace) and compared to pH, Caconcentration and alkalinity through seasonal variations in river discharge. Totalconcentrations of the metals were highest during early spring flood and during summer andautumn rain episodes. Dissolved concentrations also increased as the spring floodproceeded, but small discharge peaks within this 2 month period as well as a considerableautumn flood episode appeared to lower rather than to raise the dissolved metal concentrations.Consequently the dissolved fractions of Zn, Cd and Al showed a significant negative correlationwith river discharge, and were low at the discharge peaks. Possibly high sediment concentrationsoccurring at high flood conditions more than counteracted desorption induced by pHdecrease, and led to decreased dissolved fractions through adsorption. Cu speciationon the other hand seemed to be more closely linked to pH. Alkalinity and Ca concentration,both assumed to protect aquatic life from metal pollution, were significantly lowerduring episodes with high Cu and Al total concentrations.     

Ilmenite composition in the Tellnes Fe–Ti deposit,SW Norway: fractional crystallization,postcumulus evolution and ilmenite–zircon relation

Major and trace element XRF and in situ LA-ICP-MS analyses of ilmenite in the Tellnes ilmenite deposit, Rogaland Anorthosite Province, SW Norway, constrains a two stage fractional crystallization model of a ferrodioritic Fe-Ti-P rich melt. Stage 1 is characterized by ilmenite-plagioclase cumulates, partly stored in the lower part of the ore body (Lower Central Zone, LCZ), and stage 2 by ilmenite-plagioclase-orthopyroxene-olivine cumulates (Upper Central Zone, UCZ). The concentration of V and Cr in ilmenite, corrected for the trapped liquid effect, (1) defines the cotectic proportion of ilmenite to be 17.5 wt% during stage 1, and (2) implies an increase of D _V^Ilm during stage 2, most likely related to a shift in fO₂. The proportion of 17.5 wt% is lower than the modal proportion of ilmenite (ca. 50 wt%) in the ore body, implying accumulation of ilmenite and flotation of plagioclase. The fraction of residual liquid left after crystallization of Tellnes cumulates is estimated at 0.6 and the flotation of plagioclase at 26 wt% of the initial melt mass. The increasing content of intercumulus magnetite with stratigraphic height, from 0 to ca. 3 wt%, results from differentiation of the trapped liquid towards magnetite saturation. The MgO content of ilmenite (1.4–4.4 wt%) is much lower than the expected cumulus composition. It shows extensive postcumulus re-equilibration with trapped liquid and ferromagnesian silicates, correlated with distance to the host anorthosite. The Zr content of ilmenite, provided by in situ analyses, is low (<114 ppm) and uncorrelated with stratigraphy or Cr content. The data demonstrate that zircon coronas observed around ilmenite formed by subsolidus exsolution of ZrO₂ from ilmenite. The U-Pb zircon age of 920 ± 3 Ma probably records this exsolution process. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

River flow mass exponents with fractal channel networks and rainfall

An important problem in hydrologic science is understanding how river flow is influenced by rainfall properties and drainage basin characteristics. In this paper we consider one approach, the use of mass exponents, in examining the relation of river flow to rainfall and the channel network, which provides the primary conduit for transport of water to the outlet in a large basin. Mass exponents, which characterize the power-law behavior of moments as a function of scale, are ideally suited for defining scaling behavior of processes that exhibit a high degree of variability or intermittency. The main result in this paper is an expression relating the mass exponent of flow resulting from an instantaneous burst of rainfall to the mass exponents of spatial rainfall and that of the network width function. Spatial rainfall is modeled as a random multiplicative cascade and the channel network as a recursive replacement tree; these fractal models reproduce certain types of self-similar behavior seen in actual rainfall and networks. It is shown that under these modeling assumptions the scaling behavior of flow mirrors that of rainfall if rainfall is highly variable in space, and on the other hand flow mirrors the structure of the network if rainfall is not so highly variable.     

Deep seismic reflection experiments at Kiruna

Summary In August 1955 a series of specially arranged quarry blasts in the Kiruna iron ore mines was recorded with a refraction apparatus at approx. 10 km distance. The experiments are the first seismic investigations of the deeper crustal structure in Fennoscandia and were mainly undertaken in order to study near-vertical reflections from crustal discontinuities. The records show clear directP waves with sharp onsets and a velocity of 5.65±0.13 km/sec (in porphyry), furthermoreS waves of less definite onsets and sound waves through the atmosphere.P waves reflected from crustal discontinuities are weak and of erratic occurrence, in agreement with theoretical expectation for near-vertical reflections. Approx. depths to the Conrad and the Mohorovii'c discontinuities are calculated as 19 km and 33–34 km. There is general agreement with the explosion records written by the Grenet seismograph at Kiruna, and the differences which exist can be explained by the different frequency response of the two instruments.

---

Zusammenfassung Im August 1955 wurde eine Reihe speziell angeordneten Steinbruchsprengungen in den Eisenerzgruben bei Kiruna mittels einer Refraktionsapparatur in rund 10 km Entfernung registriert. Diese Versuche sind die ersten seismischen Untersuchungen der tieferen Krustenstruktur in Fennoskandien und wurden hauptsächlich wegen eines Studiums von Reflexionen an krustalen Diskontinuitäten bei nahe vertikalem Einfall der Wellen vorgenommen. Deutliche, direkteP-Wellen mit scharfen Einsätzen und einer Geschwindigkeit von 5.65±0.13 km/sec (Porphyr) wurden registriert, ausserdemS-Wellen mit weniger scharfen Einsätzen und Schallwellen durch die Atmosphäre. An krustalen Diskontinuitäten reflektierteP-Wellen sind schwach und unregelmässig, im Einklang mit theoretischen Erwartungen für Reflexionen bei nahe vertikalem Einfall. Die Tiefen der Conrad- und der Mohorovii-Diskontinuitäten wurden annähernd zu 19 km bzw. 33–34 km berechnet. Es besteht allgemeine Übereinstimmung mit den Explosionsregistrierungen des Grenet-Seismographen in Kiruna, und die Unterschiede können lediglich durch die unterschiedliche Frequenzempfindlichkeit der Instrumente erklärt werden.

     

A method for determination of epicenters of near earthquakes

Summary A method is developed, which permits a rapid and reliable determination of the location of near epicenters (within about 10^o) using the differences of arrival times of a common phase (usually Sg) to a net of three stations. The resulting equation for computation of epicentral distances is solved numerically once for all by an electronic computer for every station triangle and for all possible time differences for every wave used. The calculated epicentral distances and coordinates are arranged in tables with the two travel-time differences for each triangle as entries. Such tables permit an immediate solution of the problem in every special case. The accuracy of the method is investigated, and necessary precautions in its use are emphasized. Application is made to a few cases of Sg recorded at the Swedish stations.

---

Zusammenfassung Eine Methode wird entwickelt, die eine schnelle und zuverlässige Bestimmung der Lage von nahegelegenen Epizentren (innerhalb rund 10^o) mittels der Laufzeitdifferenzen einer gegebenen Welle (gewöhnlichSg) in einem Netz von drei Stationen ermöglicht. Die erhaltene Gleichung für die Berechnung der Herdentfernungen wird mittels einer elektronischen Rechenmaschine für jedes Stations-dreieck und für alle möglichen Zeitdifferenzen für jede verwendete Welle ein für allemal numerisch gelöst. Die berechneten Herdentfernungen und-Koordinaten werden in Tabellenform dargestellt mit den beiden Laufzeitdifferenzen für jedes Dreieck als Eingangswerte. Solche Tabellen ermöglichen eine unmittelbare Lösung des Problems in jedem einzelnen Fall. Die Genauigkeit der Methode wird untersucht, und die notwendigen Vorsichtsmassregeln bei ihrer Verwendung werden hervorgehoben. Die Methode wird auf einige Registrierungen vonSg an den schwedischen Stationen angewendet.