Interplay between shoreline migration paths, architecture and pinchout distance for siliciclastic shoreline tongues: evidence from the rock record

Facies, geometry and key internal stratigraphic surfaces from eight Cretaceous and Eocene clastic shoreline tongues have been documented. The regressive parts of all the studied tongues represent storm‐wave influenced strandplains, deltas or fan‐deltas, and the regressive shoreline trajectories varied from descending to ascending. The transgressive parts of the tongues are dominated by either estuarine or coastal‐plain deposits. The distance from the coeval, up‐dip non‐marine deposits to the basinward pinchout of amalgamated shoreface sandstones, measured along depositional dip, is here termed the sand pinchout distance. The study shows that the angle of regressive‐to‐transgressive turnaround (defined by the angle between the regressive and subsequent transgressive shoreline trajectories) and the process regime during turnaround largely control the sand‐pinchout distance. The amount of transgressive erosion can also partly control the pinchout distance, but this parameter was comparable for the different examples presented here. If the type of depositional system at turnaround and the depth of transgressive erosion are constant, small angles of turnaround are associated with large pinchout distances, whereas larger angles of turnaround result in smaller pinchout distances. The model developed allows sand‐pinchout distance to be predicted, using data for the landward parts of shoreline tongues. The dataset also shows that steeply rising (aggrading) shoreline trajectories tend to produce more heterolithic sandstone tongues than those formed by lower‐angle trajectories.     

ESTIMATION OF ERRORS IN ABSORBANCE RATIO MEASUREMENTS

Ratio measurements are commonly used to address a variety of analytical problems in environmental,forensic and pharmaceutical laboratories.In absorbance ratioing techniques,analytical chemists rely onthe spectral features of the analyte(s)of interest.The absorbances at two wavelengths are monitored andthe ratio of these two absorbances is computed.This ratio is then used to confirm the identity of theanalyte(s)of interest,the purity of a product or the overlap of chromatographic peaks.These decisionsoften have far-reaching consequences(e.g.the identification of the source,biogenic or petrogenic,ofhydrocarbons in biological tissues or water).Given the cost and the liabilities associated with suchdecisions,it is unfortunate that these ratios are seldom reported with any statistical confidence.Thepurpose of this study is to delineate the parameters that affect absorbance ratio measurements.Themodels that can be used to estimate the statistical confidence in these measurements are derived andevaluated experimentally.The results show that these models can estimate the relative standard deviationsin absorbance ratios accurately.They can also estimate the effect of signal-to-noise ratio and the choiceof wavelengths on the precision of absorbance ratios.     

A new radiocarbon chronology of Baumkirchen,stratotype for the onset of the Upper Würmian in the Alps

The start of the Upper Würmian in the Alps was marked by massive fluvioglacial aggradation prior to the arrival of the Central Alpine glaciers. In 1984, the Subcommission on European Quaternary Stratigraphy defined the clay pit of Baumkirchen (in the foreland of the Inn Valley, Austria) as the stratotype for the Middle to Upper Würmian boundary in the Alps. Key for the selection of this site was its radiocarbon chronology, which still ranks among the most important datasets of this time interval in the Alps. In this study we re‐sampled all available original plant specimens and established an accelerator mass spectrometry chronology which supersedes the published 40‐year‐old chronology. The new data show a much smaller scatter and yielded slightly older conventional radiocarbon dates clustering at ca. 31 ¹⁴C ka BP. When calibrated using INTCAL13 the new data suggest that the sampled interval of 653–681 m in the clay pit was deposited 34–36 cal ka BP. Using two new radiocarbon dates of bone fragments found in the fluvioglacial gravel above the banded clays allows us to constrain the timing of the marked change from lacustrine to fluvioglacial sedimentation to ca. 32–33 cal ka BP, which suggests a possible link to the Heinrich 3 event in the North Atlantic. Copyright © 2013 John Wiley & Sons, Ltd.     

A PNEUMATIC SEISMIC ENERGY SOURCE FOR SHALLOW WATER / MARSH AREAS*

Non dynamite seismic energy sources have shown only limited success in difficult shallow-water or marsh prospect areas, and none have applicability to both environments. Recently, a method has been devised to adapt a marine pneumatic source for operation in abrasive surroundings. A system composed of four of these modified sources together with associated emplacement and retrieval mechanisms has been developed and has proven to be a reliable and efficient seismic energy source for both shallow-water and marsh applications.     

Braided rivers within an arid alluvial plain (example from the Lower Triassic,western German Basin): recognition criteria and expression of stratigraphic cycles

Based on a detailed sedimentological analysis of Lower Triassic continental deposits in the western Germanic sag Basin (i.e. the eastern part of the present‐day Paris Basin: the ‘Conglomérat basal’, ‘Grès vosgien’ and ‘Conglomérat principal’ Formations), three main depositional environments were identified: (i) braided rivers in an arid alluvial plain with some preserved aeolian dunes and very few floodplain deposits; (ii) marginal erg (i.e. braided rivers, aeolian dunes and aeolian sand‐sheets); and (iii) playa lake (an ephemeral lake environment with fluvial and aeolian sediments). Most of the time, aeolian deposits in arid environments that are dominated by fluvial systems are poorly preserved and particular attention should be paid to any sedimentological marker of aridity, such as wind‐worn pebbles (ventifacts), sand‐drift surfaces and aeolian sand‐sheets. In such arid continental environments, stratigraphic surfaces of allocyclic origin correspond to bounding surfaces of regional extension. Elementary stratigraphic cycles, i.e. the genetic units, have been identified for the three main continental environments: the fluvial type, fluvial–aeolian type and fluvial/playa lake type. At the time scale of tens to hundreds of thousands of years, these high‐frequency cycles of climatic origin are controlled either by the groundwater level in the basin or by the fluvial siliciclastic sediment input supplied from the highland. Lower Triassic deposits from the Germanic Basin are preserved mostly in endoreic basins. The central part of the basin is arid but the rivers are supplied with water by precipitation falling on the remnants of the Hercynian (Variscan)–Appalachian Mountains. Consequently, a detailed study of alluvial plain facies provides indications of local climatic conditions in the place of deposition, whereas fluvial systems only reflect climatic conditions of the upstream erosional catchments.     

PERFORMANCE OF 2000 AND 6000 PSI AIR GUNS: THEORY AND EXPERIMENT*

Air guns have been used in various applications for a number of years. They were first used in coal-mining operations and were operated at up to 16000 psi charge pressures. Later, single air guns, operated at 2000 psi, found application as an oceanographic survey tool. Air gun arrays were first used in offshore seismic exploration in the mid-1960's. These early arrays were several hundred cubic inches in total volume and were operated at 2000 psi; they were either tuned arrays or several large guns of the same size with wave-shape kits. Today's arrays have total volumes greater than 5000 cu in. and are typically operated at 2000 psi. Recently, higher-pressure, lower-volume arrays operated at 4000–5000 psi have been introduced; guns used in these arrays are descendants of the coal-mining gun. On first thought one would equate increased gun pressure linearly with the amplitude of the initial pulse. This is approximately true for the signature radiated by a “free-bubble” (no confining vessel) and recorded broadband. The exact relation depends on the depth at which the gun is operated; from solution of the free-bubble oscillation equation, the relation is If P_c,1= 6014.7 psia, P_c,2= 2014.7 psia and P_{O, 1}=P_{O, 2}= 25.8 psia (corresponding to absolute pressure at 25 ft water depth), then Experiments were conducted offshore California in deep water to determine the performance of several models of air guns at pressures ranging from 2000 to 6000 psi and gun volumes ranging from 5 to 300 cu in. At a given gun pressure, the initial acoustic pulse P_a correlated with gun volume V_c according to the classical relation For 1 ms sampled data the ratio varied between 4.5 and 5.5 dB depending on gun model. Pulse width of the 2000 psi signatures indicated they are compatible with 2 ms sample-rate recording while pulse width of the 6000 psi signatures was greater, indicating they are less compatible with 2 ms sample-rate recording. Conclusions reached were that 2000 psi air guns are more efficient than higher pressure guns and are more compatible with 2 ms sample-rate requirements.