Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.     

The present-day active deformation in the central and northern parts of the Gulf of Suez area,Egypt, from earthquake focal mechanism data

The average seismic strain rate is estimated for the seismotectonic zone of the northern/central parts of the Gulf of Suez. The principal strain rate tensor and velocity tensor were derived from a combination of earthquake focal mechanisms data and seismic moment of small-sized earthquakes covering a time span of 13 years (1992–2004). A total of 17 focal mechanism solutions have been used in the calculation of the moment tensor summation. The local magnitudes (MLs) of these events range from 2.8 to 4.7. The analysis indicates that the dominant mode of deformation in the central and northern parts of the Gulf of Suez is extension at a rate of 0.008 mm/year in N28°E direction and a small crustal thinning of 0.0034 mm/year. This low level of strain means that this zone experienced a little seismic deformation. There is also a right lateral shear motion along the ESE–WNW direction. This strain pattern is consistent with the predominant NW–SE normal faulting and ESE–WNW dextral transtensive faults in this zone. Comparing the results obtained from both stress and strain tensors, we find that the orientations of the principal axes of both tensors have the same direction with a small difference between them. Both tensors show a predominantly extensional domain. The nearly good correspondence between principal stress and strain orientations in the area suggests that the tectonic strength is relatively uniform for this crustal volume.     

FT-IR measurements of cold C3H8 cross sections at 7–15 μm for Titan atmosphere

We present absorption cross sections of propane (C₃H₈) at temperatures from 145 K to 297 K in the 690–1550 cm⁻¹ region. Pure and N₂-broadened spectra were measured at pressures from 3 Torr to 742 Torr using a Bruker IFS125 FT-IR spectrometer at JPL. The gas absorption cell, developed at Connecticut College, was cooled by a closed-cycle helium refrigerator. The cross sections were measured and compiled for individual spectra recorded at various experimental conditions covering the planetary atmosphere and Titan. In addition to the cross sections, a propane pseudoline list with a frequency grid of 0.005 cm⁻¹, was fitted to the 34 laboratory spectra. Line intensities and lower state energies were retrieved for each line, assuming a constant width. Validation tests showed that the pseudoline list reproduces discrete absorption features and continuum, the latter contributed by numerous weak and hot band features, in most of the observed spectra within 3%. Based on the pseudoline list, the total intensity in the 690–1550 cm⁻¹ region was determined to be 52.93 (±3%) × 10⁻¹⁹ cm⁻¹/(molecule cm⁻²) at 296 K; this value is within 3% of the average from four earlier studies. Finally, the merit of the pseudoline approach is addressed for heavy polyatomic molecules in support of spectroscopic observation of atmospheres of Titan and other planets. The cold cross sections will be submitted to the HITRAN database (hitran.harvard.edu), and the list of C₃H₈ pseudolines will be available from a MK-IV website of JPL (http://mark4sun.jpl.nasa.gov/data/spec/Pseudo).     

Geotechnical consequences of the Newcastle Coal Measures rocks

This paper attempts to relate the lithology and fabric of four main groups of Newcastle Coal Measures rock types to their geotechnical properties and engineering behaviour. The four groups comprise: massive sandstone and conglomerate; claystones and tuffs; mudstone, shale and siltstone; and the coal itself. Although their geological relevance is primarily concerned with underground coal mining, these rocks are exposed at the surface across most of Newcastle and its suburbs, and are thus significant in terms of urban environmental geology. The key mining issues include longwall support design and panel layouts, caving and subsidence mechanisms, soft floors and stiff roofs, water inflows and pillar design. The urban geotechnical issues include landslides and rock falls, shallow abandoned mine workings, reactive and erodible soils, waste disposal and potential sources for geomaterials.     

Charge distribution on the atmospheric aerosol over the North Atlantic and the Indian Ocean

The distribution of electric charge on the marine aerosol was determined near the sea surface of the Indian Ocean and the North Atlantic during the final stage of the Snellius II-expedition. Mean values for small ion concentrationsn ⁺=455 cm^–3 andn ^–=340 cm^–3 were found over the Atlantic, whilen ⁺=310 andn ^–=250 cm^–3 were the mean values over the Indian Ocean. The ration ⁺/n^– increased from 1.2 to 2.0 with decreasing wind velocity. At wind velocities below 5 m/s 75% of the net space charge near the ocean surface was found to be carried by small ions.     

Crustal complexity in the Lachlan Orogen revealed from teleseismic receiver functions

There is an ongoing debate about the tectonic evolution of southeast Australia, particularly about the causes and nature of its accretion to a much older Precambrian core to the west. Seismic imaging of the crust can provide useful clues to address this issue. Seismic tomography imaging is a powerful tool often employed to map elastic properties of the Earth's lithosphere, but in most cases does not constrain well the depth of discontinuities such as the Mohorovi?i? (Moho). In this study, an alternative imaging technique known as receiver function (RF) has been employed for seismic stations near Canberra in the Lachlan Orogen to investigate: (i) the shear-wave-velocity profile in the crust and uppermost mantle, (ii) variations in the Moho depth beneath the Lachlan Orogen, and (iii) the nature of the transition between the crust and mantle. A number of styles of RF analyses were conducted: H-K stacking to obtain the best compressional–shear velocity (V _P /V _S) ratio and crustal thickness; nonlinear inversion for the shear-wave-velocity structure and inversion of the observed variations in RFs with back-azimuth to investigate potential dipping of the crustal layers and anisotropy. The thick crust (up to 48 km) and the mostly intermediate nature of the crust?mantle transition in the Lachlan Orogen could be due to the presence of underplating at the base of the crust, and possibly to the existing thick piles of Ordovician mafic rocks present in the mid and lower crust. Results from numerical modelling of RFs at three seismic stations (CAN, CNB and YNG) suggest that the observed variations with back-azimuth could be related to a complex structure beneath these stations with the likelihood of both a dipping Moho and crustal anisotropy. Our analysis reveals crustal thickening to the west beneath CAN station which could be due to slab convergence. The crustal thickening may also be related to the broad Macquarie volcanic arc, which is rooted to the Moho. The crustal anisotropy may arise from a strong N–S structural trend in the eastern Lachlan Orogen and to the preferred crystallographic orientation of seismically anisotropic minerals in the lower and middle crust related to the paleo-Pacific plate convergence.     

Choppy waters ahead in “a sea of peace cooperation and friendship”?: Slow progress towards the application of maritime joint development to the East China Sea

China and Japan’s June 2008 agreement in principle on maritime cooperation in the East China Sea raised hopes of a significant breakthrough in the parties' complex and long-standing disputes in the area. Subsequent progress towards the realisation of a legally binding, formal treaty on, for example, offshore petroleum joint development has been slow to materialise. In fact, the area under dispute appears to have become more rather than less extensive. This paper examines competing maritime and sovereignty claims in the East China Sea together with progress towards maritime cooperation in the context of overlapping jurisdictional claims. The paper identifies some of the key challenges that need to be overcome in realizing a functioning joint resource management regime in the East China Sea.