Optimization of grid-drilling using computer simulation

A computer simulation method has been developed to find efficient drilling grids for mineral deposits. A well-known ore deposit is used as a model to develop an efficient pattern for undiscovered ore bodies in the same area or in other prospects where similar geometry is suspected. The model for this study is the Austinville, Virginia deposit, a Mississippi Valley-type deposit composed of 17 ore bodies totaling 34 million short tons (30 million metric tons). The method employs a computer program that simulates drilling the model deposit with different patterns, including various levels of follow-up drilling. Follow-up holes are drilled in fences at one half the original spacing around holes in the grid that show ore-grade mineralization. Each pattern is drilled 100 times from random starting locations to provide a range of outcomes of drilling, including the best, worst, and most likely. For this study, patterns of 100 drill holes were composed of 10 fences spaced 1000–5000 feet (305–1524 m) apart, each with 10 holes spaced 200–1000 feet (61–305 m) apart. In all, 25 grids were used with zero to three levels of follow-up drilling. The 600/2000 grid, with drill holes spaced 600 feet (183 m) apart in fences spaced 2000 feet (610 m) apart, was compared with the 200/5000 grid because they represented contrasting outcomes. The 600/2000 grid penetrated many ore bodies consistently but with few multiple hits to individual ore bodies; whereas the 200/5000 grid inconsistently penetrated few ore bodies with many multiple hits. The 600/2000 grid was more efficient than the 200/5000 grid at hitting large ore bodies of 1,000,000 short tons or greater (900,000 metric tons or greater) and was made more effective by adding one cycle of follow-up drilling. The 600/2000 grid had a 97% chance of hitting one or more large ore bodies with at least one drill hole per ore body, and the 200/5000 grid had a 64% chance. Once hit, there was an 82% chance that the largest ore body would be penetrated by three or more holes when using the 600/2000 grid and an 88% chance using the 200/5000 grid.     

Baryte and calcite cements in the 'breccias' of Ogmore-by-Sea, South Wales

Each year many hundreds, if not thousands, of Earth-science students visit the coastline at Ogmore-by-Sea, mid-Glamorgan. They study the excellent exposures of Lower Carboniferous Limestone, with their well-preserved coral and other shelly faunas, together with the presumed late Triassic 'breccias'* that rest unconformably on top. A study of the cements within the breccias may give an insight into syndepositional mineralization and the formation of sedimentary basins linked to the opening of the Atlantic in early Mesozoic times.     

Challenging a Paradigm: Do We Need Active and Inactive Areas to Account for Near-Nuclear Jet Activity?

We briefly describe an advanced 3D gas dynamical model developed for the simulation of theenvironment of active cometary nuclei. The model canhandle realistic nucleus shapes and alternative physical models for the gas and dust production mechanism.The inner gas coma structure is computed by solving self-consistently(a) near to the surface the Boltzman Equation(b) outside of it, Euler or Navier-Stokes equations.The dust distribution is computed from multifluid ``zero-temperature' Euler equations,extrapolated with the help of a Keplerian fountain model.The evolution of the coma during the nucleus orbital and spin motion,is computed as a succession of quasi-steady solutions. Earlier versions of the model using simple,``paedagogic' nuclei have demonstrated that the surface orographyand the surface inhomogeneity contribute similarly to structuring the near-nucleusgas and dust coma,casting a shadow on the automatic attribution of such structures to ``active areas'.The model was recently applied to comet P/Halley, for whichthe nucleus shape is available. In the companion paper of this volume,we show that most near-nucleus dust structuresobserved during the 1986 Halley flybys are reproduced, assuming that the nucleus is strictly homogeneous. Here, we investigate the effect of shape perturbations and homogeneityperturbations. We show that the near nucleus gas coma structure is robust vis-a-vissuch effects. In particular, a random distribution of active and inactive areaswould not affect considerably this structure, suggesting that such areas,even if present, could not be easily identified on images of the coma.     

Predicted interplanetary distribution of Lyman-σ intensity and polarization

Our current understanding of the spatial and temporal distribution of interplan etary neutral hydrogen is currently limited to a comparison of Lyman-σ photometric data with predictions of the solar backscattered radiation using theoretical models. In this paper, how the uncertainties in current model calculations could be reduced through the future use of polarization measurements made from interplanetary spacecraft is investigated. In particular, inquiry into how a mapping of the degree of linear polarization made from a spacecraft at various locations in the Solar System can improve knowledge of the interstellar wind parameters, number density, temperature, and velocity, is made. A polarization measurement can, in principle, be made with very high precision. In this regard, being a relative quantity, a polarization measurement can be made independent of instrumental calibration and long-term sensitivity degredation. Furthermore, the sky distribution of both intensity and polarization has been calculated using a variety of models for the neutral hydrogen. It is found that the polarization distribution over the sky is quite different from that of the intensity distribution. It is also showed that the maximum degree of polarization of the Laymam-σ line increases with heliocentric distance of the spacecraft, varying from 0 up to ～ 18% at 20 AU.     

The determination and analysis of the orbit of NIMBUS 1 ROCKET, 1964-52B: Part 1: The orbits

Orbital parameters of the satellite NIMBUS 1 ROCKET (1964-52B) have been determined at 285 epochs using about 14,500 optical and radar observations during the last 2233 days of its life. 1964-52B was in an orbit inclined at about 98.7° to the Equator and it decayed on 13 August 1974. The orbital elements were found using the RAE orbit refinement program PROP 6 giving average orbital accuracies in perigee height and inclination at 110 m and 0.002° respectively.     

Local potential analysis of MHD instability

In many astrophysical problems, the study of the stability of an atmosphere in the presence of a magnetic field is of importance. In most cases the MHD instabilities of atmospheres are studied by energy principle of Bernsteinet al. (1958). In this paper, a general method for studying the stability of a system subject to MHD equations of conditions has been proposed. This is based on the local potential concept put forward by Glansdorff and Prigogine (1964). The scheme for securing stability criteria has been demonstrated in two particular cases.     

Low energy ions in the shuttle environment: Evidence for strong ambient-contaminant interactions

The quadrupole mass spectrometer flown by the Air Force Geophysics Laboratory on STS-4 in 1982 detected large intensities of several ions, primarily O⁺, H₂O⁺ and H₃O⁺, with energies less than 1.5 e V with respect to the Shuttle Orbiter. Ion-molecule reactions and non-reactive scattering between the outgassing neutral flux from the Orbiter surfaces and the ambient ionic species are identified as the primary source of these low energy ions.     

Wave Beams in an Inhomogeneous Plasma in a Transverse Magnetic Field

The propagation of axisymmetric magnetohydrodynamic waves near the equatorial plane of the crust of a neutron star in a transverse magnetic field is considered. The magnetic field is perpendicular to the equatorial plane. The magnetic fields and electric currents excited by this wave beam at the stellar surface are determined.     

Thaw modification of frost-fissure wedges,Richards Island,Pleistocene Mackenzie Delta,Western Arctic Canada

Thaw modification is the general process whereby frost-fissure wedges are modified during thaw, and by which frost-fissure pseudomorphs may develop. Specific processes of thaw modification are inferred from ice-wedge pseudomorphs, composite-wedge pseudomorphs and deformed sand wedges in the Pleistocene Mackenzie Delta: i.e. thermal erosion, collapse, subsidence, refreezing, loading, buoyancy, spreading, folding and shearing. Thaw modification is believed to result in selective preservation of pseudomorphs and wedges. Sand wedges are more likely to be preserved than are ice-wedge pseudomorphs or compositewedge pseudomorphs, because only those sand wedges that penetrate massive ice or icy sediments are prone to thaw modification. Furthermore, whereas ice wedges preferentially develop in ice-rich, fine-grained sediments (thaw-sensitive), their pseudomorphs appear to be selectively preserved in ice-poor, coarse-grained sediments (thaw-stable).