Mapping QTLs of caudal fin length in common carp (Cyprinus carpio L.)

Common carp (Cyprinus carpio L.) exhibits significant morphological variability in the shape and size of the caudal fin. In this study, we used 190 progeny from two F₁ parents to identify and map quantitative trait loci (QTLs) that influence caudal fin length (CFL) and the ratio (RCS) between caudal fin length and standard length (SL) based on a microsatellite genetic map of common carp. A total of 15 QTLs were detected in seven different linkage groups. One significant and eight suggestive QTLs affecting CFL were identified on LG8, LG14, LG29, LG32 and LG44, which explained 8.0%–22.1% of the phenotypic variation; six suggestive QTLs affecting RCS were detected on LG8, LG32, LG46 and LG48, which explained 7.0%–15.4% of the phenotypic variation. The QTLs for caudal fin length detected in this study may serve as a starting point for identification of genes involved in caudal fin development in common carp.     

长白山及邻区地壳、上地幔顶部三维速度结构

根据沿长白山布设的宽频带流动地震台站及吉林省地震台网所记录的近震P波走时数据,利用层析成像方法对长白山及邻区（39°N-45°N、122°E-130°E）深至40 km的地壳和上地幔顶部三维速度结构进行了研究。结果表明：地震的发生和分布多集中于断裂等复杂地质构造。利用较高分辨率的地壳、上地幔顶部三维速度结构证实了长白山火山区岩浆囊存在,并推测岩浆囊的位置位于火山口的西南方向,深度为10~40 km。壳内岩浆囊分布对进一步解释、认识火山灾害提供了重要的深部信息。     

巴西坎波斯盆地和桑托斯盆地油气分布差异及主控因素

巴西坎波斯盆地和桑托斯盆地均为典型的被动陆缘盆地。随着勘探程度的增加和近年来在桑托斯盆地深水区盐下油气的重大发现,坎波斯盆地和桑托斯盆地之间的构造-沉积演化和油气地质特征的差异性越来越明显。通过对坎波斯盆地和桑托斯盆地区域地质特征和油气成藏条件差异性的比较,总结出两个盆地油气分布特征的截然不同。研究表明,盐窗比较发育的坎波斯盆地中已发现的油气主要富集于盐上浊积砂岩,而连续盐岩发育的桑托斯盆地已发现的油气则主要富集于盐下湖相碳酸盐岩。对于盐下层系,连续分布的盐岩和圣保罗高地的发育控制了盐下层系油气的分布;对于盐上层系,盐相关构造的发育则为油气垂向运移提供了有利通道,从而控制了盐上油气藏的形成与分布。     

交通荷载作用下公路路基工作区深度研究

根据路面不平整实测资料,获得了汽车动荷载的计算模型和参数,并利用此荷载模式来分析公路结构的动力响应。考虑到公路结构的三维分层性状,利用Fourier变换技术和求解层状结构的精确刚度矩阵法,研究了公路结构在移动汽车荷载作用下的动力响应问题。为了方便工程应用,利用Odemark厚度和模量的当量转换公式,将公路结构简化为由路面、路基及地基组成的3层体系,并以此为基础分析了路基动应力的衰减规律,同时重点研究了汽车轴载大小、当量路面厚度及路基模量对路基工作区深度的影响,最后建议了路基工作区深度的定量表达式,研究结果可为公路路基设计提供参考。     

Geomorphological site classification for the Fujian province

Geomorphological classification of the Fujian province was done based on remote-sensing imaging, digital elevation maps, and slope gradient data acquired by ArcGIS 9.2. The engineering geological units in the Fujian province were divided into five types by the geomorphologic shape and genesis. The relationship among geomorphological type, engineering geological unit, and site category was determined using engineering geological data and site category data. Then, after making a preliminary site classification adjusted by drill hole data, the site was classified into four types: I₀, I₁, II, and III according to site classification standards of equivalent shear-wave velocity and overburden thickness. The results showed that the site categories in the Fujian province mainly consist of type II, which accounts for 85.26 % of the land area. The percentage of I₀ was the smallest, which accounts for only 2.44 % of the total area.     

����Chapman�������ݵ��������ܶ�

????Chapman?????????г????????????????????????????????й?????GPS CORS???????????й????????????????????????????????????????????????????в???????0.311 m???????????????????????????????????仯???о???????????÷????????????????н????????????????????????????????????仯????????     

��ѹ����dz�ѹ��ˮλ��ϫЧӦ���䶨������

???????????????λ????Ч??????????????????????????     

��ƵGPSʵʱ�������������

?????????????λ??????????????????????????????????t??????????????????????????????????????????????????λ?????GPS????????????????????????????mm/s?????????????1 cm/s??     

滇西地区近期重力场变化与地震活动

对2010—2012年川滇西部地区流动重力资料进行统一处理,得到区域重力场变化图象,并以此为基础研究2012年宁蒗-盐源5.7、彝良5.7级地震与区域重力场变化及安宁河-则木河断裂带的关系。结果显示:震区局部重力场在两次地震前均出现了快速、大幅的上升变化,在约一年的时间内增加了约60×10 nms-2的重力变化量。     

山东重力场季节性变化特征

利用山东地区2010—2012年6期流动重力测量资料,研究了鲁南网重力场的变化特征。结果表明重力场呈明显的季节性变化,即每年的3月与8月,重力场存在反向变化,变化幅值相近;季节性变化与降水有关。