Heat flow and thermal modeling of the Yinggehai Basin, South China Sea

Geothermal gradients are estimated to vary from 31 to 43 °C/km in the Yinggehai Basin based on 99 temperature data sets compiled from oil well data. Thirty-seven thermal conductivity measurements on core samples were made and the effects of porosity and water saturation were corrected. Thermal conductivities of mudstone and sandstone range from 1.2 to 2.7 W/m K, with a mean of 2.0±0.5 W/m K after approximate correction. Heat flow at six sites in the Yinggehai Basin range from 69 to 86 mW/m², with a mean value of 79±7 mW/m². Thick sediments and high sedimentation rates resulted in a considerable radiogenic contribution, but also depressed the heat flow. Measurements indicate the radiogenic heat production in the sediment is 1.28 μW/m³, which contributes 20% to the surface heat flow. After subtracting radiogenic heat contribution of the sediment, and sedimentation correction, the average basal heat flow from basement is about 86 mW/m².Three stages of extension are recognized in the subsidence history, and a kinematic model is used to study the thermal evolution of the basin since the Cenozoic era. Model results show that the peak value of basal heat flow was getting higher and higher through the Cenozoic. The maximum basal heat flow increased from 65 mW/m² in the first stage to 75 mW/m² in the second stage, and then 90 mW/m² in the third stage. The present temperature field of the lithosphere of the Yinggehai Basin, which is still transient, is the result of the multistage extension, but was primarily associated with the Pliocene extension.     

Numerical Calculation of Equivalent Cell Permeability Tensors for General Quadrilateral Control Volumes

A new method for upscaling fine scale permeability fields to general quadrilateral-shaped coarse cells is presented. The procedure, referred to as the conforming scale up method, applies a triangle-based finite element technique, capable of accurately resolving both the coarse cell geometry and the subgrid heterogeneity, to the solution of the local fine scale problem. An appropriate averaging of this solution provides the equivalent permeability tensor for the coarse scale quadrilateral cell. The general level of accuracy of the technique is demonstrated through application to a number of flow problems. The real strength of the conforming scale up method is demonstrated when the method is applied in conjunction with a flow-based gridding technique. In this case, the approach is shown to provide results that are significantly more accurate than those obtained using standard techniques.     

四川省房屋建筑易损性研究

研究房屋建筑易损性特征是防震减灾工作必不可少的环节之一，本文通过对多年工作的系统总结，得出四川省不同地区的房屋建筑易损性矩阵，全省房屋建筑抗震性能总体水平不高，这是造成地震灾害加重的主要原因之一，随着经济发展实力的提高，适当提高全省房屋建筑抗震设防水平可大大减轻特别是中强地震所造成的经济损失。     

漾濞地震震源位置分析

采用一致的地震震相和台网布局，应用昆明数字地震台网资料，对2002年月1月4日－1月7日的漾濞地震及序列作进一步核定，得出了更精确的地震震源位置，并作出三维空间图。     

1993年中甸M5.8地震前后区域尾波衰减研究

以Aki,K和Chouet^[1]提出的地方震尾波散射理论为基础，利用1993年7月17日中甸MS5．8地震的前震和余震资料，研究了该次地震前后的尾波振幅衰减率β和QC^-1值的时空变化。结果表明，主震前后区域尾波振幅衰减率β和QC^-1值发生了明显的变化。主震前，区域平均β值为0．0122s^-1，相应的QC值为111；主震后，区域平均β值为0．023s^-1，相应的QC值为60。主震前后的QC值变化为1．85倍，表明在以主震为中心，半径约50km的小范围内主震前后的介质背景发生了明显变化。用释放的地震应变能ε（t)的空间分布特点分析，表明主震前高QC值地区与高应变能释放地区是相一致的。中甸地震序列的尾波振幅衰减β和QC值显示了具有前兆意义地空变化的过程，并以力学观点分析解释了产生这种变化的成因。     

数字化射线照相技术对轻物质的判断

本文介绍了数字化射线照相技术对轻物质进行判断的方法。经实践证明，该方法是合理和有效的，可大大增强对轻物质的识别能力，是一种非常可行的识别技术。     

2001年四川省雅江-康定6.0级地震烈度考察及发震构造背景雏议

2001年2月23日四川省发生的6.0级地震，其宏观震中位于雅江县与康定县之间的高山峡谷地带．极震区烈度可达Ⅷ 度，Ⅷ 度区、Ⅶ 度区和Ⅵ 度区面积分别为180km2，1472 km2和3998 km2，等震线分布总体形态呈椭圆形，长轴近南北向．震区建筑物普遍受损，极震区山地灾害较为严重．初步分析认为，此次地震的发生与理塘断裂和玉农希断裂的长期活动有关，主干断裂活动造成的地壳应力调整和集中，最终在块体内部的次级断裂上释放而产生地震．      

企业地震预警系统应用研究

在充分调研国外地震预警系统现状的基础上，进行了地震预警系统的研究，研制了相应的数据分析软件。采用数字化观测技术、GIS技术等高新技术，在中国石油天然气股份有限公司大连分公司建立了地震预警试验系统，并将该地震预警系统与地震应急系统相连，为今后开展类似工作积累了经验。     

乌鲁木齐区域数字遥测台网各子台背景噪声分析

选取乌鲁木齐区域数字遥测台网中 1 1个子台的背景噪声数字记录 ,计算并分析其背景噪声地动速度均方根值 RMS、有效测量动态范围以及噪声功率谱 ,最后确定出各台址背景噪声相对集中的频段     

近几十年来西北江三角洲网河区顶点的河相关系

据西北江三角洲网河区顶点马口、三水两水文站1959－1988年的实测大断面、流量、流速和水位资料，采用Leopold的水力几何形态关系建立断面河相关系，探讨两水文观测断面的河相关系特征、年际变化及河相关系的差异。河相关系表明，西北江三角洲的断面水力几何形态指数β1值相对较小，而β3值相对较大，代表了珠江特有的丰水少沙河流的河相关系。