准噶尔盆地基底火山岩中的辉石及其对盆地基底性质的示踪

根据钻井和航磁资料，准噶尔盆地基底可划分为西、北、南三区。3个地区火山岩中辉石的化学成分、种属名称各不相同。辉石化学成分反映出来的寄主岩的碱度、碱度演化趋势以及寄主岩形成的构造环境、构造环境演化史均各有差异，佐证了准噶尔盆地基底是由哈萨克斯坦板块东南缘、西伯利亚板块西南缘和塔里木板块北缘增生大陆拼合而成。其中西、北两区拼合较早，早石炭世末的早海西运动时抬升成陆；南区成陆较晚，晚古炭世末的晚海西运动使南区与西、北两区联合大陆对接，形成完整的准噶尔盆地海西褶皱基底。     

离散裂隙渗流方法与裂隙化渗透介质建模

流体渗流模拟的连续介质方法通常适用于多孔地质体，并不一定适用于裂隙岩体，由于裂隙分布及其特征与孔隙差异较大。若流体渗流主要受裂隙的控制，对于一定尺寸的裂隙岩体，多孔介质假设则较难刻划裂隙岩体的渗流特征。离散裂隙渗流方法不但可直接用于模拟裂隙岩体非均质性和各向异性等渗流特征，而且可用其确定所研究的裂隙岩体典型单元体及其水力传导（渗透）张量大小。主要讨论了以下问题：（1）饱和裂隙介质中一般的离散流体渗流模拟；（2）裂隙岩体中的REV（典型单元体）及其水力传导（渗透）张量的确定；（3）利用离散裂隙网络流体渗流模型研究裂隙方向几何参数对水力传导系数和REV的影响；（4）在二维和三维离散裂隙流体渗流模型中对区域大裂隙和局部小裂隙的处理方法。调查结果显示离散裂隙流体渗流数学模型可用来评价不同尺度上的裂隙岩体的水力特征，以及裂隙方向对裂隙化岩体的水力特征有着不可忽视的影响。同时，局部小裂隙、区域大裂隙应当区别对待，以便据其所起的作用及水力特征，建立裂隙化岩体相应的流体渗流模型。     

熊耳山地区太古宙超镁铁质岩的地球化学特征及成因探讨

熊耳山地区太古宙超镁铁质岩在空间分布上具有不均一性、成带性和多方向性特征 ,岩石以橄榄岩、辉石岩、角闪石岩为主 ,蚀变强烈。岩石贫钙、镁 ,低铝、K2 O Na2 O,稀土总量较高 ,轻重稀土分馏显著。地球化学特征表明大部分超镁铁质岩体为岩浆侵入成因     

X射线衍射峰五基本要素的物理学意义与应用

本文根据Bragg衍射方程、Scherrer方程、衍射强度计算原理，研究讨论了X射线衍射5构成要素中的衍射峰位置、衍射峰宽度、衍射峰高度的物理学意义。根据实验研究证明了衍射峰不对称性的几何条件特征，并用地质事实验证了衍射形态变化与晶格应变和粒度大小的内在联系。从而阐明了单个衍射峰5基本构成要素的完整物理学意义，并以实例论证了5要素的实际应用价值。     

含油玄武岩中绿泥石的形成温度

以苏北盆地高邮凹陷闵桥地区含油玄武岩中的绿泥石为研究对象，探讨了其成因和形成温度，认为玄武岩中绿泥石有两种形成方式、五条形成途径：其一为蚀变演化，包括：火山玻璃、斜长石、辉石的蚀变，交代橄榄石斑晶，以及皂石的进一步演化；其二为沉淀结晶，包括从热液中直接沉淀生长和胶体溶液充填后的结晶。计算结果显示，蚀变演化形成的绿泥石，其形成温度为128－271℃；沉淀结晶形成的绿泥石，其形成温度为31－63℃。玄武岩中绿泥石形成温度与埋藏深度间没有明显的线性相关。进一步研究表明，本区玄武岩作为储油层，其进油时的温度为62－118℃，不超出48－137℃。     

微波作用下化学助剂在细粉煤脱水中的应用研究

探讨了在微波加热条件下加入表面活性剂和溶剂油等有机溶剂对脱水效果的影响，力求找出其中的脱水规律。结果表明：微波脱水效果明显，同时，表面活性剂能够大大降低滤饼含湿量，而且非离子表面活性剂的效果比阳离子、阴离子好，柴油也能促进粉煤的脱水。     

Origin of Gold—Bearing Fluid and Its Initiative Localization Mechanism in Xiadian Gold Deposit,Shandong Province

The composition of quartz inclusions and trace elements in ore indicate that gold-bearing fluid in the Xiadian gold deposit,Shandong Province,stemmed from both mantle and magma,belonging to a composite origin.Based on theoretical analysis and high temperature and high pressure experimental studies,gold-bearing fluid initiative localization mechanism and the forming environment of ore-host rocks are discussed in the present paper.The composite fluid extracted gold from rocks because of its expanding and injecting forces and injecting forces and flew through ore-conducive structures,leading to the breakup of rocks.The generation of ore-host faults and the precipitation of gold-bearing fluid occurred almost simultaneously.This study provides fur-ther information about the relationships between gold ore veins and basic-ultrabasic vein rocks and intermediate vein rocks,the spatial distribution of gold ore veins and the rules governing the migration of ore fluids.     

Ordovician Graptolite Rhabdosome Complication and Its Implications on Sea Level Changes

A total of four times of rhabdosome complication events, i.e., the lateral branching of graptolite stipes during the Late Middle Ordovician, the secondary branching of graptolite stipes at the earliest Upper Ordovician, the early Qiantangjiangian of Upper Ordovician and the middle Qiantangjiangian, respectively, is discussed in this paper. These events and other adaptation events demonstrate close relationships between a diverse graptolite fauna and sea level changes, and consequently can be employed to study sea level fluctuations. It is safe to conclude that the complication of rhabdosome started at the maximum flooding surface (MFS) and terminated at the beginning of regression.     

Heat flow and thermal modeling of the Yinggehai Basin, South China Sea

Geothermal gradients are estimated to vary from 31 to 43 °C/km in the Yinggehai Basin based on 99 temperature data sets compiled from oil well data. Thirty-seven thermal conductivity measurements on core samples were made and the effects of porosity and water saturation were corrected. Thermal conductivities of mudstone and sandstone range from 1.2 to 2.7 W/m K, with a mean of 2.0±0.5 W/m K after approximate correction. Heat flow at six sites in the Yinggehai Basin range from 69 to 86 mW/m², with a mean value of 79±7 mW/m². Thick sediments and high sedimentation rates resulted in a considerable radiogenic contribution, but also depressed the heat flow. Measurements indicate the radiogenic heat production in the sediment is 1.28 μW/m³, which contributes 20% to the surface heat flow. After subtracting radiogenic heat contribution of the sediment, and sedimentation correction, the average basal heat flow from basement is about 86 mW/m².Three stages of extension are recognized in the subsidence history, and a kinematic model is used to study the thermal evolution of the basin since the Cenozoic era. Model results show that the peak value of basal heat flow was getting higher and higher through the Cenozoic. The maximum basal heat flow increased from 65 mW/m² in the first stage to 75 mW/m² in the second stage, and then 90 mW/m² in the third stage. The present temperature field of the lithosphere of the Yinggehai Basin, which is still transient, is the result of the multistage extension, but was primarily associated with the Pliocene extension.