Thorough wetting and drainage of a peat lysimeter in a climate change scenario

A peat deposit (Zennare basin, Venice coastland, Italy) was monitored in previous field studies to investigate the hydrological response of organic soil to meteorological dynamics. Field tests and modelling predictions highlighted the risk of the complete loss of this peat layer during the next 50 years, due to oxidation enhanced by the increased frequency of warmer periods. Unfortunately, despite the considerable impacts that are expected to affect peat bogs (in this area and worldwide), only a few experimental studies have been carried out to assess the hydrologic response of peat to severe water scarcity. Because of that, an undisturbed 0.7 m³ peat monolith was collected, transferred to the laboratory and instrumented. The total weight (representative of the water content dynamics of the peat monolith as a whole), and two vertical profiles of matric potentials and water content were monitored in controlled water-scarce conditions. After an extended air-drying period, the monolith was used as an undisturbed peat lysimeter and a complete cycle of wetting and drainage was performed. Supplementary measurements of matric potential ψ and water content θ were collected by testing peat subsamples on a suction table apparatus. A set of water retention curves was determined in a range of matric potentials broader (ψ down to −7 m) than the current natural conditions in the field (minimum ψ = −1 m). While water content at saturation showed values similar to those in the original natural conditions (θ ≅ 0.8), a remarkable loss of water holding capacity (even for low potentials) has been highlighted, especially in deep layers that are now permanently below the water table. The retention curves changed shape and values, with a more pronounced hysteresis visible in an increasing distance between wetting and drying data. Hydraulic non-equilibrium between the water content and water potential could be a possible cause and it is worth modelling in future studies. The parameters of the van Genuchten retention curves were obtained for the wetting and the drying phases.     

Connecting Coronal Mass Ejections to Their Solar Active Region Sources: Combining Results from the HELCATS and FLARECAST Projects

Coronal mass ejections (CMEs) and other solar eruptive phenomena can be physically linked by combining data from a multitude of ground-based and space-based instruments alongside models; however, this can be challenging for automated operational systems. The EU Framework Package 7 HELCATS project provides catalogues of CME observations and properties from the Heliospheric Imagers on board the two NASA/STEREO spacecraft in order to track the evolution of CMEs in the inner heliosphere. From the main HICAT catalogue of over 2,000 CME detections, an automated algorithm has been developed to connect the CMEs observed by STEREO to any corresponding solar flares and active-region (AR) sources on the solar surface. CME kinematic properties, such as speed and angular width, are compared with AR magnetic field properties, such as magnetic flux, area, and neutral line characteristics. The resulting LOWCAT catalogue is also compared to the extensive AR property database created by the EU Horizon 2020 FLARECAST project, which provides more complex magnetic field parameters derived from vector magnetograms. Initial statistical analysis has been undertaken on the new data to provide insight into the link between flare and CME events, and characteristics of eruptive ARs. Warning thresholds determined from analysis of the evolution of these parameters is shown to be a useful output for operational space weather purposes. Parameters of particular interest for further analysis include total unsigned flux, vertical current, and current helicity. The automated method developed to create the LOWCAT catalogue may also be useful for future efforts to develop operational CME forecasting.     

The role of near-surface cavities in the carbon dioxide cycle of karst areas: evidence from the Carburangeli Cave Natural Reserve (Italy)

Hydrological, chemical and meteorological data collected during the years 2006–2007 at Carburangeli Cave (Italy) have provided new insights on the near-surface cycle of carbon dioxide, particularly concerning the role played by fractures and karst conduits. Carbon dioxide is trapped in the underground atmosphere essentially when its temperature is lower than the outer one. By contrast, convective air circulation disperses all the excess CO₂ in the external environment when the thermal differential is inverted. The network of fractures and karst conduits then works, in the vadose zone, as a re-circulator of CO₂ from the soil to the atmosphere. The total amount of CO₂ fixed in the underground is controlled, during the wet season, by the amount of infiltrating waters, which act as the main carrier of CO₂ in the subsoil. By contrast, during the dry season, gravitational drainage is responsible for the accumulation of carbon dioxide in the underground voids. The quantitative balance demonstrated that the degassed CO₂ amounts are one order of magnitude higher than the dissolved CO₂. In light of this, if the near-surface outgassing processes are not taken into account, CO₂ budgets may be affected by significant errors.     

Transfer function‐noise modelling of an aquifer system in NE Italy

In this article, we use a transfer function‐noise (TFN) modelling strategy with single output and multiple/single inputs to study the relationships among a large unconfined aquifer in the upper Venetian plain (Northeast Italy), its recharge components (rainfalls and losing river) and a multi‐layered confined system located in the middle Venetian plain. Model identification from the data raises a range of difficulties when seeking models with consistent physical behaviour, but no information related to the transfer function order and the lags with no zero weights is available. Therefore we use an automatic identification procedure for TFN models. The obtained results suggest that the rainfall component is more important than the river discharge in the unconfined aquifer, and the behaviours of the deep‐confined aquifers are synchronous with that observed in the Badoere area. Copyright © 2010 John Wiley & Sons, Ltd.     

Land uplift due to subsurface fluid injection

The subsurface injection of fluid (water, gas, vapour) occurs worldwide for a variety of purposes, e.g. to enhance oil production (EOR), store gas in depleted gas/oil fields, recharge overdrafted aquifer systems (ASR), and mitigate anthropogenic land subsidence. Irrespective of the injection target, some areas have experienced an observed land uplift ranging from a few millimetres to tens of centimetres over a time period of a few months to several years depending on the quantity and spatial distribution of the fluid used, pore pressure increase, geological setting (depth, thickness, and area extent), and hydro-geomechanical properties of the injected formation. The present paper reviews the fundamental geomechanical processes that govern land upheaval due to fluid injection in the subsurface and presents a survey of some interesting examples of anthropogenic uplift measured in the past by the traditional levelling technique and in recent times with the aid of satellite technology. The examples addressed include Long Beach, Santa Clara Valley, and Santa Ana basin, California; Las Vegas Valley, Nevada; Cold Lake and other similar sites, Canada; Tokyo and Osaka, Japan; Taipei, Taiwan; Krechba, Algeria; Upper Palatinate, Germany; Chioggia and Ravenna, Italy.     

Stability of (Cs,K)Al<Subscript>4</Subscript>Be<Subscript>5</Subscript>B<Subscript>11</Subscript>O<Subscript>28</Subscript> (londonite) at high pressure and high temperature: a potential neutron absorber material

The stability and the thermo-elastic behaviour of a natural londonite

Rheological behaviour of the crust in Southern Apennine (Italy): results from a thermal and seismological study

To add information on the brittle/ductile transition of the Southern Apennine, we investigated a rheological profile of the crust along a WSW–ENE‐oriented cross‐section running from Neapolitan Volcanic Zone to Apulia foreland. The rheological model was obtained computing a thermal modelling and constrained by a relocalization of earthquakes of the area. Results show that the area is characterized by horizontal rheological variations, with two horizons interlayered with ductile horizons, that are quite predominant with respect to vertical ones. The horizontal stratification of lithospheric rheology has important geodynamic consequence and could provide new insights to better understand the tectonic processes which have played a major role to construct the Southern Apennine belt. Results of this study suggested that well‐constrained rheological models, built integrating information from both relocated earthquakes and thermal state, could give important hints on the mechanical behaviour of the crust and its related tectonic processes.     

Superconducting filter for radio astronomy using interdigitated, capacitively loaded spirals

A matched pair of microstrip spiral superconducting filters with centre frequency 357.5?MHz and 29.4% bandwidth has been developed for radio astronomy. The high coupling coefficients required for the large bandwidth have been achieved through interdigitating the spirals to provide a large interaction length, and by adding loading capacitors on the inner ends of the resonators, together with previously reported features. A low-pass filter has been cascaded with each band-pass filter to mitigate spurious responses. Measurements show 0.09?dB loss, thought to arise mainly from sources outside the filter itself, plus 0.12?dB maximum ripple.