Relict mountain slope deposits of northern Portugal: facies,sedimentogenesis and environmental implications

This paper deals with the formation processes and the palaeoenvironmental significance of relict slope deposits located on the uppermost part of the north Portugal mountains. For this purpose, seven key sites representative of the different lithofacies have been selected and analysed in detail. The data show that three main dynamic processes are responsible for the emplacement of regional fossil slope deposits: runoff, debris flows and dry grain flows. The ubiquity of these processes and the lack of frost‐related features or landforms do not support the existence of severe Pleistocene climates in this part of the lberian Peninsula as postulated by previous work. Pedological data gathered at one of the study sites show that a subalpine environment was probably present at 700–800 m altitude between 29 and 14 kyr. Using data from the Pyrenees Mountains, a 6.5 to 12°C depression in mean annual temperature has been tentatively postulated for this Pleniglacial period. Copyright © 2003 John Wiley & Sons, Ltd.     

The Somme valley terrace system (northern France); a model of river response to Quaternary climatic variations since 800,000 bp

Recent research on the Somme Valley terrace deposits, that began in 1987, has resulted in an integrated sequence of geological and geomorphological evidence for this area that is of particular significance for prehistoric investigations. This has been achieved using previous evidence and new results from archaeological and geological excavations. These include longitudinal profiles, cartography and detailed synthesis of sections of alluvial deposits, stratigraphy of river deposits and overlying loess sequences. The work, based on a study of the geometry of the terrace system, has resulted in the identification of ninestepped alluvial formations that occur along 70 km of the valley. Detailed study permits the integration of the various alluvial sequences. This suggests that each alluvial sequence results from sedimentation through a single glacial-interglacial climatic cycle. This hypothesis is confirmed by investigation of soil and loess sequences of the deposits overlying the fluvial sediments. The synthesis presented provides a basis for understanding the deposition of the terrace system and an initial chronostratigraphic interpretation for the deposits.     

Microbial Diversity in Nankai Trough Sediments at a Depth of 3,843 m

Dense populations of bivalves, primarily Calyptogena sp., were observed at cold seeps of the Nankai Trough. Bacterial input to the sediment was estimated through determination of phospholipid ester-linked fatty acid (PLFA) and DNA profiles. Results indicated a bacterial biomass of 10⁹ cells (g dry wt)^-1 while individual fatty acid profiles revealed a predominance of monounsaturated fatty acids, mainly 18:1 isomers. The presence of these fatty acids can be interpreted to reflect a response to low temperature and a predominance of psychrophilic bacteria. DNA fragments encoding bacterial ribosomal RNA small-subunit sequences (16S rDNA) were amplified by the polymerase chain reaction method using DNA extracted directly from the sediment samples. From the sequencing results, at least 19 kinds of bacterial 16S rDNAs related to mostly the Proteobacteria and a few gram-positive bacteria were identified. These results suggest that the bacterial community in the Nankai Trough sediments consists of mainly bacteria belonging to the Proteobacteria , , and subdivisions. Bacteria belonging to the and subdivisions, which are known to include epibiont and sulfate reducing bacteria, respectively, were mostly detected in the sediment obtained from inside the area of the Calyptogena community, and the -Proteobacteria may function to supply reduced sulfur to bacterial endosymbionts of Calyptogena.     

Modelling of local velocity anomalies: a cookbook

The determination of small-scale velocity anomalies (from tens to a few hundreds of metres) is a major problem in seismic exploration. The impact of such anomalies on a structural interpretation can be dramatic and conventional techniques such as tomographic inversion or migration velocity analysis are powerless to resolve the ambiguity between structural and velocity origins of anomalies. We propose an alternative approach based on stochastic modelling of numerous anomalies until a set of models is found which can explain the real data. This technique attempts to include as much a priori geological information as possible. It aims at providing the interpreter with a set of velocity anomalies which could possibly be responsible for the structural response. The interpreter can then choose one or several preferred models and pursue a more sophisticated analysis. The class of retained models are all equivalent in terms of data and therefore represent the uncertainty in the model space. The procedure emulates the real processing sequence using a simplified scheme. Essentially, the technique consists of five steps: 1 Interpretation of a structural anomaly in terms of a velocity anomaly with its possible variations in terms of position, size and amplitude. 2 Drawing a model by choosing the parameters of the anomaly within the acceptable range. 3 Modelling the traveltimes in this model and producing the imaging of the reflected interface. 4 Comparing the synthetic data with the real data and keeping the model if it lies within the data uncertainty range. 5 Iterate from step 2. In order to avoid the high computational cost inherent in using statistical determinations, simplistic assumptions have been made: ? The anomaly is embedded in a homogeneous medium: we assume that the refraction and the time shift due to the anomaly have a first-order effect compared with ray bending in the intermediate layers. ? We model only the zero-offset rays and therefore we restrict ourselves to structural problems. ? We simulate time migration and so address only models of limited structural complexity. These approximations are justified in a synthetic model which includes strong lateral velocity variations, by comparing the result of a full processing sequence (prestack modelling, stack and depth migration) with the simplified processing. This model is then used in a blind test on the inversion scheme.     

Surface area, porosity and water adsorption properties of fine volcanic ash particles

Our understanding on how ash particles in volcanic plumes react with coexisting gases and aerosols is still rudimentary, despite the importance of these reactions in influencing the chemistry and dynamics of a plume. In this study, six samples of fine ash (<100 m) from different volcanoes were measured for their specific surface area, a_s, porosity and water adsorption properties with the aim to provide insights into the capacity of silicate ash particles to react with gases, including water vapour. To do so, we performed high-resolution nitrogen and water vapour adsorption/desorption experiments at 77 K and 303 K, respectively. The nitrogen data indicated a_s values in the range 1.1–2.1 m²/g, except in one case where a a_s of 10 m²/g was measured. This high value is attributed to incorporation of hydrothermal phases, such as clay minerals, in the ash surface composition. The data also revealed that the ash samples are essentially non-porous, or have a porosity dominated by macropores with widths >500 Å. All the specimens had similar pore size distributions, with a small peak centered around 50 Å. These findings suggest that fine ash particles have relatively undifferentiated surface textures, irrespective of the chemical composition and eruption type. Adsorption isotherms for water vapour revealed that the capacity of the ash samples for water adsorption is systematically larger than predicted from the nitrogen adsorption a_s values. Enhanced reactivity of the ash surface towards water may result from (i) hydration of bulk ash constituents; (ii) hydration of surface compounds; and/or (iii) hydroxylation of the surface of the ash. The later mechanism may lead to irreversible retention of water. Based on these experiments, we predict that volcanic ash is covered by a complete monolayer of water under ambient atmospheric conditions. In addition, capillary condensation within ash pores should allow for deposition of condensed water on to ash particles before water reaches saturation in the plume. The total mass of water vapour retained by 1 g of fine ash at 0.95 relative water vapour pressure is calculated to be ~10^–2 g. Some volcanic implications of this study are discussed.Editorial responsibility: J. Gilbert     

PULSE: a finite element code for solving adiabatic nonradial pulsation equations

We briefly present the nonradial adiabatic pulsation code PULSE first developped for white dwarf asteroseismology and now used to compute adiabatic oscillation properties for various types of stellar objects. Numerical tests show that the code is able to provide the accuracy (for a given stellar model) required to deal with the precision in frequency expected from the COROT long runs. While the ultimate objective is to compare the output of various pulsation codes (see these proceedings), we already emphasize problems that need to be addressed concerning, in particular, the mesh resolution of the input stellar models and its impact on the accuracy at which frequencies can be computed.     

Some characteristics of an S-component of solar radiation identified on November 1966 eclipse at 4.28-cm wavelength

A strong S-component of solar radiation was identified during the total solar eclipse of November 12, 1966. Its characteristics, as measured at 4.28 cm, were studied in terms of flux and polarization, and its spectral features were derived by the use of data from other observatories. The whole source presented approximately the typical characteristics suggested by some authors in the last few years, and further it has been shown that it could be resolved into at least two enhanced regions, one showing unpolarized radiation with a brightness temperature T _b 1.2 × 10⁶ °K, and the other showing 50% of left-handed circularly polarized radiation, with T _b 0.7 × 10⁶ °K. The source's overall characteristics favour the presence of non-thermal absorption at the emitting regions.     

Fast and direct nonparametric procedures in the L-moment homogeneity test

Regional frequency analysis is an important tool to properly estimate hydrological characteristics at ungauged or partially gauged sites in order to prevent hydrological disasters. The delineation of homogeneous groups of sites is an important first step in order to transfer information and obtain accurate quantile estimates at the target site. The Hosking–Wallis homogeneity test is usually used to test the homogeneity of the selected sites. Despite its usefulness and good power, it presents some drawbacks including the subjective choice of a parametric distribution for the data and a poorly justified rejection threshold. The present paper addresses these drawbacks by integrating nonparametric procedures in the L-moment homogeneity test. To assess the rejection threshold, three resampling methods (permutation, bootstrap and Pólya resampling) are considered. Results indicate that permutation and bootstrap methods perform better than the parametric Hosking–Wallis test in terms of power as well as in time and procedure simplicity. A real-world case study shows that the nonparametric tests agree with the HW test concerning the homogeneity of the volume and the bivariate case while they disagree for the peak case, but that the assumptions of the HW test are not well respected.     

Molecular and distribution data on the poorly known,elusive, cave mysid Harmelinella mariannae (Crustacea: Mysida)

Mediterranean underwater marine caves harbour abundant populations of several species of mysids that are increasingly used as biological models in ecological and evolutionary studies. One exception is the species Harmelinella mariannae, described in 1989 and then hardly ever again reported in the literature. We here provide the first data on the distribution of this poorly known taxon that, contrary to expectations for a rare brooding cave dweller, we now report from Madeira Island in the nearby Atlantic, to the easternmost parts of the Mediterranean. Brief behavioural observations are added, particularly its atypical solitary habits and its feeding behaviour as a high trophic level carnivore. Molecular characterization of the different specimens captured provided three sorts of information. Mitochondrial COI and 16S haplotypes suggest different colonization waves in the Mediterranean, with one group in the Eastern Basin, two in the Marseille region in the NW part of this sea, and another group with a very wide extension from Madeira to Liguria and Malta. Mitochondrial data also support that one of the groups in Marseille might have diverged as a cryptic species of Harmelinella. 18S rRNA gene displays a single common sequence to all specimens from the four groups, and seems to confirm the original proposed placement of this taxon within the subfamily Heteromysinae, not Leptomysinae.     

Potential consequences of projected climate change impacts on hydroelectricity generation

There is a growing concern that countries should reduce their dependence on fossil fuels for electricity generation and look to other cleaner technologies. Hydroelectricity is one such option. However, given that hydropower is dependent on rainfall and associated runoff for power generation, it is susceptible to both the positive and negative impacts of climate change, such as increases in temperature and changes in precipitation and runoff. In this paper, impacts on hydropower generation have been organised as either changes in long-term trends or short-term variability and shocks. These impacts could either manifest themselves as direct impacts on hydropower generation potential or as indirect impacts (or ancillary impacts) such as increased competition for water. Citing examples from around the world, this paper investigates the scale of these projected impacts, and the potential cost implication of inaction. It concludes by making recommendations for possible adaptive options to build resilience in response to local impacts.