Pits,rifts and slumps: the summit structure of Piton de la Fournaise

A clear model of structures and associated stress fields of a volcano can provide a framework in which to study and monitor activity. We propose a volcano-tectonic model for the dynamics of the summit of Piton de la Fournaise (La Reunion Island, Indian Ocean). The summit contains two main pit crater structures (Dolomieu and Bory), two active rift zones, and a slumping eastern sector, all of which contribute to the actual fracture system. Dolomieu has developed over 100 years by sudden large collapse events and subsequent smaller drops that include terrace formation. Small intra-pit collapse scars and eruptive fissures are located along the southern floor of Dolomieu. The western pit wall of Dolomieu has a superficial inward dipping normal fault boundary connected to a deeper ring fault system. Outside Dolomieu, an oval extension zone containing sub-parallel pit-related fractures extends to a maximum distance of 225 m from the pit. At the summit the main trend for eruptive fissures is N80°, normal to the north–south rift zone. The terraced structure of Dolomieu has been reproduced by analogue models with a roof to width ratio of approximately 1, suggesting an original magma chamber depth of about 1 km. Such a chamber may continue to act as a storage location today. The east flank has a convex–concave profile and is bounded by strike-slip fractures that define a gravity slump. This zone is bound to the north by strike-slip fractures that may delineate a shear zone. The southern reciprocal shear zone is probably marked by an alignment of large scoria cones and is hidden by recent aa lavas. The slump head intersects Dolomieu pit and may slide on a hydrothermally altered layer known to be located at a depth of around 300 m. Our model has the summit activity controlled by the pit crater collapse structure, not the rifts. The rifts become important on the mid-flanks of the cone, away from pit-related fractures. On the east flank the superficial structures are controlled by the slump. We suggest that during pit subsidence intra-pit eruptions may occur. During tumescence, however, the pit system may become blocked and a flank eruption is more likely. Intrusions along the rift may cause deformation that subsequently increases the slump’s potential to deform. Conversely, slumping may influence the east flank stress distribution and locally control intrusion direction. These predictions can be tested with monitoring data to validate the model and, eventually, improve monitoring.     

昌吉州棉区棉花生育期气候条件分析

为了深入开展棉花气象服务,对昌吉州主要棉区的气温、降水和日照等与棉花生长发育密切相关的气候资料进行了全面的统计分析,得出昌吉州主要棉区影响棉花生长发育的主要气象因素:播种期的霜冻、苗期的低温、花铃期的高温和吐絮期的低温和全生育期的热量。     

On the Correlation between Convective Plume Updrafts and Downdrafts,Lidar Reflectivity and Depolarization Ratio

We question the correlation between vertical velocity (w) on the one hand and the occurrence of convective plumes in lidar reflectivity (i.e. range corrected backscatter signal Pz ²) and depolarization ratio (Δ) on the other hand in the convective boundary layer (CBL). Thermal vertical motion is directly investigated using vertical velocities measured by a ground-based Doppler lidar operating at 2 μm. This lidar provides also simultaneous measurements of lidar reflectivity. In addition, a second lidar 200 m away provides reflectivities at 0.53 and 1 μm and depolarization ratio at 0.53 μm. The time series from the two lidars are analyzed in terms of linear correlation coefficient (ρ). The main result is that the plume-like structures provided by lidar reflectivity within the CBL as well as the CBL height are not a clear signature of updrafts. It is shown that the lidar reflectivity within the CBL is frequently anti-correlated (ρ (w, Pz ² )) with the vertical velocity. On the contrary, the correlation coefficient between the depolarization ratio and the vertical velocity ρ (w, Δ ) is always positive, showing that the depolarization ratio is a fair tracer of updrafts. The importance of relative humidity on the correlation coefficient is discussed. An erratum to this article can be found at     

Magnetostratigraphy of the lower Triassic volcanics from deep drill SG6 in western Siberia: evidence for long-lasting Permo–Triassic volcanic activity

The deep drill hole SG6 in western Siberia (66°N, 78.5°E) penetrated 1.1  km of lower Triassic basalts, which are possibly an extension of the central Siberian Permo– Triassic flood basalt province. About 300 samples of these basalts were progressively demagnetized and measured. Principal component analysis often shows multiple magnetizations carried by haematite and magnetite. The corrected mean inclinations are +77° and −77° for the haematite component. A magnetostratigraphic scale was derived and showed a N–R–N–R–N succession. This is quite different from the Noril'sk and Taimyr typical polarity scale, R–N.
  The basalts found in the SG6 deep drill hole are slightly younger than those of central Siberia and Taimyr. They correspond to middle–upper Induan age, whereas the Noril'sk and Taimyr sections correspond to an uppermost Permian and lower Induan age. Altogether they indicate that, after a high output rate of volcanic material near the Permo–Triassic boundary, this activity slowed down drastically on the Siberian platform and Taimyr, but persisted for several million years in western Siberia.     

Topographic effects on solitary Rossby waves

The model for baroclinic solitary waves previously described by Flierl is developed to include effects of bottom variations.Topographic disturbances are shown to act, through their first and second derivatives, on both the phase speed correction and the maximum horizontal amplitude.The combined effects of mean shear flow steepening and bottom variations are considered; an equation is derived, showing the relative importance of each effect.     

Oscillations in a simple air-water system driven by a stabilizing heat flux

An air-water system coupled by heat and stress is modelled by two interacting fluid loops. When heated from above and cooled from below the system can become unstable and self-sustained oscillations develop, whereas a single fluid system is stable in the same situation. The oscillations are explained by thermal lag between the loops. The water loop oscillates stably under its restoring buoyancy torque but the coresponding air oscillations, generated by heat conduction from the water loop, lag by roughly half a period, and the air stress therefore acts to amplify rather than damp oscillations in the water loop.     

Structure,diversity and stability of two oligochaete communities according to sedimentary inputs in Lake Geneva (Switzerland)

Two oligochaete communities were sampled monthly during one year in two 35 m deep locations of Lake Geneva (Switzerland). Organic sedimentation was lower and less variable in station 1 than in station 2 (157 versus 214 g C m⁻²yr⁻¹). The oligochaete community in station 1 was more diverse and more stable (persistent over time) than in station 2, as long as the organic sedimentation was low. Diversity and stability decreased in station 1 when the organic sedimentation increased, and during anOscillatoria bloom. The less diverse community in station 2 was more resistent to these changes. Diversity was associated with environmental stability, but resistance to perturbation was greater in the simpler community which is adapted to changing environmental conditions. The value of oligochaete communities as an indicator of the level of eutrophication was reassessed according to our present data. Changes in the structure of oligochaete communities were related to changes in sedimentation processes.     

Emplacement of the St. Narcisse moraine as a climatic event in Eastern Canada

The length (more than 300 km) and size of the St. Narcisse morainic system suggest that it represents an important glacial event, probably climatically controlled and not related to a surge. Dates on marine material (shells) both from within and external to the moraine suggest that its time of emplacement was roughly 11,000 years ago, well after the beginning of the Champlain Sea Episode, but still possibly correlative with the Valders event of the Lake Michigan area.     

The NdSr isotopic correlation in mantle materials and geodynamic consequences

The neodymium-strontium isotopic correlation observed in most of the Earth mantle materials is evaluated by means of direct modelling. Several geochemical models are quantitatively developed to explain the observations. The main results of this modelling are that such a correlation is not geochemically trivial and that it corresponds to specific conditions in chemical fractionation. These specific conditions seem to be satisfied by solid-liquid partitioning in magmatic conditions. The discussion of the experimental data supports a continuous convecting-magmatic fractionation model for a large proportion of the mantle.     

Deformation pattern in a heterogeneous material: Folded and cleaved sedimentary cover immediately overlying a crystalline basement (Oisans, French Alps)

Particularly well exposed structures in folded and cleaved sedimentary cover immediately overlying a crystalline basement have been studied. Chemical analysis (X.R.F. and microprobe) reveal pressure solution process and give the possibilities of measurement of mass transfer. Study of fluid inclusion veins has determined the temperature pressure conditions: thermal effect of the basement and decrease of temperature and pressure with the age of various synkinematic veins.Characteristic examples of the behaviour of a heterogeneous material during coaxial and non-coaxial deformation are shown:

1. (1) Successive different asymmetrical folds, various cleavages and fractures appear in a shear zone parallel to the main fabric with variations of thickness and rock behaviour.

2. (2) Evolution of cleavage in such a shear zone (with or without slipping) is linked to the relations between the rotation of contraction direction and the rate of the cleavage process.

3. (3) Fold axes changed from the horizontal y direction to the vertical (or E—W transversal to the crystalline massif) X direction, with increase of the (X/Z) and (X/Y) ratios (obtained by fossils and reconstructed fold shape). This strain is always heterogeneous and the most deformed zone frequently evolves to discontinuities with slip.

4. (4) Indentation exists on all scale: from hard object (100 μ, with parenthesis form of pressure solution cleavage apparent on map distribution of various element) to basement block (with variation of strain value in the indented cover).

A model of the evolution of the deformation of sedimentary cover immediately overlying a crystalline basement is given in conclusion.