Petroleum hydrocarbons in sediments of Southampton water estuary

The sediments of Southampton Water were analysed for petroleum hydrocarbons to determine the fate of petrochemical refinery waste in the estuary. Much of the petroleum hydrocarbons appears to be removed by adsorption onto estuarine sediments close to source. Surface sediment concentrations range from 3·1mg/g dry weight near a refinery to 0·5 mg/g dry weight at locations distant from the refinery.The absence of any change with depth in total hydrocarbon concentrations from some sediment cores and the presence of distinct ‘oil’ horizons in others suggests that mixing of sediments in the area is very random. Sedimentation rates in areas where a distinct oil horizon was observed ranged from 1 to 3cm a year.     

Ionic activity coefficients in aqueous mixtures of NaCl and MgCl2

Methods developed earlier, based on hydration numbers for individual ionic species, have been extended to the calculation of ionic activity coefficients in aqueous systems of two electrolytes MX and NX₂ with a common unhydrated anion (X⁻). The data required include the mean activity coefficients of MX and NX₂ in the mixtures, together with the osmotic coefficient. The procedure is illustrated by a calculation of γ_Na, γ_Mg, and γ_Cl in a mixture of NaCl and MgCl₂ closely approximating the composition of seawater with salinity of 35‰.     

Bioavailability: the organism as sensor

The use of a system of continuous culture of phytoplankton at constant population density, the ‘cage-culture’ turbidostat, as a monitor of the bioavailability of pollutant materials, is illustrated. In the case of proposed dredge spoils from two polluted areas, it is shown that bulk analyses for scheduled materials cannot be equated with bioavailability. Monitoring for the effect of the whole pollutant mixture on a properly chosen test population could obviate the necessity for chemical analyses for each component.     

Parametric modelling of joint probability density distributions for steepness and asymmetry in deep water waves

Traditional wave steepness s = H/L does not define steep asymmetric waves uniquely. Three additional parameters characterising single zero-downcross waves in a time series are crest front steepness, vertical asymmetry factor and horizontal asymmetry factor. Parametric models for joint probability density distributions for deep water waves are presented. The joint distributions are for crest front steepness-wave height, vertical asymmetry factor-wave height, total wave steepness-wave height and wave height-wave period. The parametric models are estimated from zero-downcross analysis of wave data obtained from measurements at sea on the Norwegian continental shelf. The results of the analysis presented here can be used in the estimation of the probabilities of occurrence of steep asymmetric waves and breaking waves in deep water. Thus the results are useful for the practical naval architect and ocean engineer who are considering unusual events in the sea, the associated accidents or responses and the probability of occurrence of such events.     

Tidally incised valleys on tropical carbonate shelves: An example from the northern Great Barrier Reef, Australia

The formation of incised valleys on continental shelves is generally attributed to fluvial erosion under low sea level conditions. However, there are exceptions. A multibeam sonar survey at the northern end of Australia's Great Barrier Reef, adjacent to the southern edge of the Gulf of Papua, mapped a shelf valley system up to 220 m deep that extends for more than 90 km across the continental shelf. This is the deepest shelf valley yet found in the Great Barrier Reef and is well below the maximum depth of fluvial incision that could have occurred under a − 120 m, eustatic sea level low-stand, as what occurred on this margin during the last ice age. These valleys appear to have formed by a combination of reef growth and tidal current scour, probably in relation to a sea level at around 30–50 m below its present position.

Tidally incised depressions in the valley floor exhibit closed bathymetric contours at both ends. Valley floor sediments are mainly calcareous muddy, gravelly sand on the middle shelf, giving way to well-sorted, gravely sand containing a large relict fraction on the outer shelf. The valley extends between broad platform reefs and framework coral growth, which accumulated through the late Quaternary, coincides with tidal current scour to produce steep-sided (locally vertical) valley walls. The deepest segments of the valley were probably the sites of lakes during the last ice age, when Torres Strait formed an emergent land-bridge between Australia and Papua New Guinea. Numerical modeling predicts that the strongest tidal currents occur over the deepest, outer-shelf segment of the valley when sea level is about 40–50 m below its present position. These results are consistent with a Pleistocene age and relict origin of the valley.

Based on these observations, we propose a new conceptual model for the formation of tidally incised shelf valleys. Tidal erosion on meso- to macro-tidal, rimmed carbonate shelves is enhanced during sea level rise and fall when a tidal, hydraulic pressure gradient is established between the shelf-lagoon and the adjacent ocean basin. Tidal flows attain a maximum, and channel incision is greatest, when a large hydraulic pressure gradient coincides with small channel cross sections. Our tidal-incision model may explain the observation of other workers, that sediment is exported from the Great Barrier Reef shelf to the adjacent ocean basins during intermediate (rather than last glacial maximum) low-stand, sea level positions. The model may apply to other rimmed shelves, both modern and ancient.     

Assessment of cytochrome P450 1A in harbour seals (Phoca vitulina) using a minimally-invasive biopsy approach

Biomarkers of organochlorine exposure, such as the induction of cytochrome P450 1A (CYP1A), can be used to assess the impact of environmental contaminants on the health of free-ranging marine mammal populations. The objective of the present study was to measure CYP1A in skin and liver biopsies obtained from live harbour seals (Phoca vitulina). Twelve harbour seal pups, aged three to five weeks, were captured from the Fraser River estuary, British Columbia, Canada, and temporarily held in captivity. Skin ( approximately 60 mg) and liver ( approximately 40 mg) biopsies, obtained while seals were under general anaesthesia, yielded sufficient tissue for the measurement of CYP1A by immunoblot analysis and ethoxyresorufin O-deethylase activity. A short-term exposure experiment, in which harbour seals (n=3) were treated orally with beta-naphthoflavone (BNF), resulted in increased hepatic and cutaneous CYP1A protein levels, consistent with observations in other mammals. This study is the first to measure CYP1A in skin and liver biopsies from live harbour seals and to report in vivo BNF-associated CYP1A induction in a marine mammal. The results demonstrate that microsamples collected using minimally-invasive techniques can provide toxicologically-relevant information form marine mammals.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

The toxicity of one-hour silver exposures to early-life stages of the surf Spisula solidissima (Dillwyn)

Early life stages of Spisula solidissima (1-, 4-, 8- and 12-h post-fertilization) were exposed to various concentrations of silver in solution (0, 4, 8, 24, 44, 124 and 278 μg liter^?1) for 1 h. An additional group of 1-h post-fertilized eggs was treated with 0, 4, 11 and 24 μg liter^?1 silver continuously for 48h. Results indicate that younger embryos are more susceptible to Ag. Exposure of one-hour-old embryos to silver for only 1 h gives results similar to a continuous 48-h exposure to the same concentration of Ag. The calculated EC₅₀ for 48-h continuously exposed embryos was similar to the EC₅₀ for 1-h post-fertilized embryos that were exposed to silver for only 1 h.     

Gravity at sea

This is a review article on the types of gravity-measuring instruments used or tested at sea since 1903, on the various extraneous accelerations that affect sea measurements, and on results obtained in several gravity surveys using one type of meter. Free-air gravity anomaly maps are included of: (1) the Gulf of Mexico; (2) a strip west of the coast from northern California to the southern tip of Alaska; and (3) north of Hawaii. Hypothetical crustal and subcrustal sections, consistent with gravity anomalies and seismic refraction data, are included for selected regions.