Geomasking sensitive health data and privacy protection: an evaluation using an E911 database

Geomasking is used to provide privacy protection for individual address information while maintaining spatial resolution for mapping purposes. Donut geomasking and other random perturbation geomasking algorithms rely on the assumption of a homogeneously distributed population to calculate displacement distances, leading to possible under-protection of individuals when this condition is not met. Using household data from 2007, we evaluated the performance of donut geomasking in Orange County, North Carolina. We calculated the estimated k-anonymity for every household based on the assumption of uniform household distribution. We then determined the actual k-anonymity by revealing household locations contained in the county E911 database. Census block groups in mixed-use areas with high population distribution heterogeneity were the most likely to have privacy protection below selected criteria. For heterogeneous populations, we suggest tripling the minimum displacement area in the donut to protect privacy with a less than 1% error rate.     

A multiple indicator, multiple cause method for representing social capital with an application to psychological distress

This paper describes a structural equation methodology for obtaining social capital scores for survey subjects from multiple indicators of social support, neighbourhood and trust perceptions, and memberships of organizations. It adjusts for variation that is likely to occur in levels of social capital according to geographic context (e.g. level of area deprivation, geographic region, level of urbanity) and demographic group. Social capital is used as an explanatory factor for psychological distress using data from the 2006 Health Survey for England. A highly significant effect of social capital in reducing the chance of psychiatric caseness is obtained after controlling for other individual and geographic risk factors. Allowing for social capital has considerable effects on the impacts on psychiatric health of other risk factors. In particular, the impact of area deprivation category is much reduced. There is also evidence of significant differentiation in social capital between population categories and geographic contexts.     

High‐Precision,High‐Accuracy Oxygen Isotope Measurements of Zircon Reference Materials with the SHRIMP‐SI

Analytical protocols for SHRIMP‐SI oxygen isotope analysis (δ¹⁸O) of a suite of zircon reference materials (RMs) are presented. Data reduction involved a robust estimate of uncertainties associated with the individual spot as well as for groups where the spot data are combined. The repeatability of δ¹⁸O measurements is dependent on both the analytical conditions and the choice of the primary reference material. Under optimised conditions, repeatability was often better than 0.4‰ (2s) allowing sample uncertainties to be obtained to better than 0.2‰ (at 95% confidence limit). Single spot uncertainty combined the within‐spot precision with the scatter associated with repeated measurements of the primary zircon reference material during a measurement session. The uncertainty for individual spots measured under optimised conditions was between 0.3 and 0.4‰ (at 95% confidence). The analytical protocols described were used to assess a variety of zircon RMs that have been used for geochronology and for which laser fluorination oxygen isotope data are available (Temora 2, FC1, R33, QGNG and Ple?ovice), as well as zircons that have been used as RMs for trace element or other types of determination (Mud Tank, Monastery, 91500, AS57, AS3, KIM‐5, OG1, SL13, CZ3 and several other Sri Lankan zircons). Repeated analyses over nine sessions and seven different mounts show agreement within analytical uncertainty for Temora 2, FC1, R33, QGNG, Ple?ovice and 91500, when normalised to Mud Tank. For existing ion microprobe mounts with these materials, an appropriate δ¹⁸O can be determined. However, care should be taken when using zircons from the Duluth Complex (i.e., FC1, AS57 and AS3) as reference materials as our data indicated an excess scatter on δ¹⁸O values associated with low‐U zircon grains.     

On Sinkholes and Galaxies: An Example of Fractal Universality

Mathematical Geosciences - The universality of fractals implies that very different physical processes can give rise to similar complex spatial patterns. Sinkholes (dolines) and galaxies provide a...     

Evaluating new fault-controlled hydrothermal dolomitization models: Insights from the Cambrian Dolomite,Western Canadian Sedimentary Basin

Fault-controlled hydrothermal dolomitization in tectonically complex basins can occur at any depth and from different fluid compositions, including ‘deep-seated’, ‘crustal’ or ‘basinal’ brines. Nevertheless, many studies have failed to identify the actual source of these fluids, resulting in a gap in our knowledge on the likely source of magnesium of hydrothermal dolomitization. With development of new concepts in hydrothermal dolomitization, the study aims in particular to test the hypothesis that dolomitizing fluids were sourced from either seawater, ultramafic carbonation or a mixture between the two by utilizing the Cambrian Mount Whyte Formation as an example. Here, the large-scale dolostone bodies are fabric-destructive with a range of crystal fabrics, including euhedral replacement (RD1) and anhedral replacement (RD2). Since dolomite is cross-cut by low amplitude stylolites, dolomitization is interpreted to have occurred shortly after deposition, at a very shallow depth (<1 km). At this time, there would have been sufficient porosity in the mudstones for extensive dolomitization to occur, and the necessary high heat flows and faulting associated with Cambrian rifting to transfer hot brines into the near surface. While the δ¹⁸O_water and ⁸⁷Sr/⁸⁶Sr ratios values of RD1 are comparable with Cambrian seawater, RD2 shows higher values in both parameters. Therefore, although aspects of the fluid geochemistry are consistent with dolomitization from seawater, very high fluid temperature and salinity could be suggestive of mixing with another, hydrothermal fluid. The very hot temperature, positive Eu anomaly, enriched metal concentrations, and cogenetic relation with quartz could indicate that hot brines were at least partially sourced from ultramafic rocks, potentially as a result of interaction between the underlying Proterozoic serpentinites and CO₂-rich fluids. This study highlights that large-scale hydrothermal dolostone bodies can form at shallow burial depths via mixing during fluid pulses, providing a potential explanation for the mass balance problem often associated with their genesis.     

Subfossil oribatid mite communities indicate Holocene permafrost dynamics in Canadian mires

Permafrost thaw in peatlands is one of the most widespread and worrying consequences of climate warming in the sub-Arctic area. To predict future climate feedbacks, it is important to study the history of permafrost aggradation and thaw. Plant macrofossil analysis with radiocarbon dating has been widely used in detecting past permafrost dynamics in peatlands, however, due to a lack of permafrost-specific plant indicator species, determining the exact timing of permafrost aggradation remains a challenge. In this study, we investigated if oribatid mites can be used to determine Holocene permafrost aggradation and degradation in Canadian mires. Based on analyses of subfossil oribatid mite assemblages of Holocene peat profiles from two mires in the Hudson Bay Lowlands area, our results suggest that two species, Carabodes labyrinthicus and Neoribates aurantiacus, are useful bioindicators, which can be used in palaeoecological studies determining permafrost histories. Moreover, our results show that subfossil oribatid mite remains can reveal periods of permafrost, which cannot be determined with certainty based on plant macrofossils alone.     

The Effect of Stage on Flow and Components of the Local Force Balance

Flow fields and water and bed surface topography were measured at two different stages as flow shoals over a submerged mid-channel bar in a straight reach downstream of a bend in Solfatara Creek, Wyoming. The data allow calculation and comparison of the magnitude of the component terms in the downstream and cross-stream force balance at the different stages. At the lower stage, corresponding to a discharge that is 30 per cent of the bankfull discharge, the convective acceleration terms in the equations describing the force balance are important, particularly the terms associated with the cross-stream transport of momentum. These terms are large because of the large accelerations and cross-stream flow forced by the shallow flow over the bar. At the higher stage, corresponding to a discharge that is 45 per cent of the bankfull discharge, flow is more directly downstream and cross-stream velocity is generally less in most of the channel. Downstream flow velocities at the higher stage are larger, but the acceleration is more gradual. Consequently, the convective accelerations at the higher stage tend to be less important than at the lower stage. Results from the two different stages suggest that some of the difference in conclusions reached by various workers on the significance of the various terms in the governing equations may be associated with the relative depth of flow. © 1997 John Wiley & Sons, Ltd.     

Enstatite meteorite clasts in Almahata Sitta and other polymict ureilites: Implications for the formation of asteroid 2008 TC3 and the history of enstatite meteorite parent asteroids

The anomalous polymict ureilite Almahata Sitta (AhS) fell in 2008 when asteroid 2008 TC₃ disintegrated over Sudan and formed a strewn field of disaggregated clasts of various ureilitic and chondritic types. We studied the petrology and oxygen isotope compositions of enstatite meteorite samples from the University of Khartoum (UoK) collection of AhS. In addition, we describe the first bona fide (3.5 mm-sized) clast of an enstatite chondrite (EC) in a typical polymict ureilite, Northwest Africa (NWA) 10657. We evaluate whether 2008 TC₃ and typical polymict ureilites have a common origin, and examine implications for the history of enstatite meteorite asteroids in the solar system. Based on mineralogy, mineral compositions, and textures, the seven AhS EC clasts studied comprise one EH_a3 (S151), one EL_b3 (AhS 1002), two EH_b4-5 (AhS 2012, AhS 26), two EH_b5-6 or possibly impact melt rocks (AhS 609, AhS 41), and one EL_b6-7 (AhS 17), while the EC clast in NWA 10657 is EH_a3. Oxygen isotope compositions analyzed for five of these are similar to those of EC from non-UoK collections of AhS, and within the range of individual EC meteorites. There are no correlations of oxygen isotope composition with chemical group or subgroup. The EC clasts from the UoK collection show the same large range of types as those from non-UoK collections of AhS. The enstatite achondrite, AhS 60, is a unique type (not known as an individual meteorite) that has also been found among non-UoK AhS samples. EC are the most abundant non-ureilitic clasts in AhS but previously were thought to be absent in typical polymict ureilites, necessitating a distinct origin for AhS. The discovery of an EC in NWA 10657 changes this. We argue that the types of materials in AhS and typical polymict ureilites are essentially similar, indicating a common origin. We elaborate on a model in which AhS and typical polymict ureilites formed in the same regolith on a ureilitic daughter body. Most non-ureilitic clasts are remnants of impactors implanted at ~50–60 Myr after CAI. Differences in abundances can be explained by the stochastic nature of impactor addition. There is no significant difference between the chemical/petrologic types of EC in polymict ureilites and individual EC meteorites. This implies that fragments of the same populations of EC parent bodies were available as impactors at ~50–60 Myr after CAI and recently. This can be explained if materials excavated from various depths on EC bodies at ~50–60 Myr after CAI were reassembled into mixed layers, leaving relatively large bodies intact to survive 4 billion years. Polymict ureilites record a critical timestep in the collisional and dynamical evolution of the solar system, showing that asteroids that may have accreted at distant locations had migrated to within proximity of one another by 50–60 Myr after CAI, and providing constraints on the dynamical processes that could have caused such migrations.     

GPCC's new land surface precipitation climatology based on quality-controlled in situ data and its role in quantifying the global water cycle

In 1989, the need for reliable gridded land surface precipitation data sets, in view of the large uncertainties in the assessment of the global energy and water cycle, has led to the establishment of the Global Precipitation Climatology Centre (GPCC) at Deutscher Wetterdienst on invitation of the WMO. The GPCC has calculated a precipitation climatology for the global land areas for the target period 1951–2000 by objective analysis of climatological normals of about 67,200 rain gauge stations from its data base. GPCC's new precipitation climatology is compared to several other station-based precipitation climatologies as well as to precipitation climatologies derived from the GPCP V2.2 data set and from ECMWF's model reanalyses ERA-40 and ERA-Interim. Finally, how GPCC's best estimate for terrestrial mean precipitation derived from the precipitation climatology of 786 mm per year (equivalent to a water transport of 117,000 km³) is fitting into the global water cycle context is discussed.     

What controls submarine channel development and the morphology of deltas entering deep-water fjords?

River deltas and associated turbidity current systems produce some of the largest and most rapid sediment accumulations on our planet. These systems bury globally significant volumes of organic carbon and determine the runout distance of potentially hazardous sediment flows and the shape of their deposits. Here we seek to understand the main factors that determine the morphology of turbidity current systems linked to deltas in fjords, and why some locations have well developed submarine channels while others do not. Deltas and associated turbidity current systems are analysed initially in five fjord systems from British Columbia in Canada, and then more widely. This provides the basis for a general classification of delta and turbidity current system types, where rivers enter relatively deep (>200 m) water. Fjord-delta area is found to be strongly bimodal. Avalanching of coarse-grained bedload delivered by steep mountainous rivers produces small Gilbert-type fan deltas, whose steep gradient (11°–25°) approaches the sediment's angle of repose. Bigger fjord-head deltas are associated with much larger and finer-grained rivers. These deltas have much lower gradients (1.5°–10°) that decrease offshore in a near exponential fashion. The lengths of turbidity current channels are highly variable, even in settings fed by rivers with similar discharges. This may be due to resetting of channel systems by delta-top channel avulsions or major offshore landslides, as well as the amount and rate of sediment supplied to the delta front by rivers. © 2018 John Wiley & Sons, Ltd.