Objectives of fisheries management: case studies from the UK, France, Spain and Denmark

The main objectives of fisheries management are generally similar throughout the world. These are often stated in policy documents such as the Common Fisheries Policy and the Magnuson–Stevens Fishery Conservation and Management Act. However, at the local level often the key objectives of management are more detailed, characterised by both the overriding management structure and the status and type of fishery concerned. In this paper, we consider case study fisheries from the UK, France, Spain and Denmark to compare some of the various types of fisheries and fisheries management systems that exist in the European Union. From this, we define the key objectives for each management system.     

A B-spline based higher order panel method for analysis of steady flow around marine propellers

A higher order panel method based on B-spline representation for both the geometry and the solution is developed for the analysis of steady flow around marine propellers. The self-influence functions due to the normal dipole and the source are desingularized through the quadratic transformation, and then shown to be evaluated using conventional numerical quadrature. By selecting a proper order for numerical quadrature, the accuracy of the present method can be increased to the machine limit. The far- and near-field influences are shown to be evaluated based on the same far-field approximation, but the near-field solution requires subdividing the panels into smaller subpanels continuously, which can be effectively implemented due to the B-spline representation of the geometry. A null pressure jump Kutta condition at the trailing edge is found to be effective in stabilizing the solution process and in predicting the correct solution. Numerical experiments indicate that the present method is robust and predicts the pressure distribution on the blade surface, including very close to the tip and trailing edge regions, with far fewer panels than existing low-order panel methods.     

Evolving Turbulence Realizations of Atmospheric Flow

A significant difference exists between estimates of contaminant atmospheric transport and dispersion calculated by an ensemble-averaged model and the turbulent details of any particular atmospheric transport and dispersion realization. In some cases, however, it is important to be able to make inferences of these realizations using ensemble-averaged models. It is possible to make such inferences if there are sensors in the field to report contaminant concentration observations. Any information determined about the atmospheric transport and dispersion realization can then be assimilated into a forecast model. This approach can enhance the accuracy of the atmospheric transport and dispersion forecast of a particular event. This work adopts that approach and reports on a genetic algorithm used to optimize the variational problem. Given contaminant sensor measurements and a transport and dispersion model, one can back-calculate unknown source and meteorological parameters. In this case, we demonstrate the dynamic recovery of unknown meteorological variables, including the transport variables that comprise the “outer variability” (wind speed and wind direction) and the dispersion variables that comprise the “inner variability” (contaminant spread). The optimization problem is set up in an Eulerian grid space, where the comparison of the concentration field variable between the predictions and the observations forms the cost function. The transport and dispersion parameters, which are determined from the optimization, are in Lagrangian space. This calculation is applied to continuous and instantaneous releases in a horizontally homogeneous wind field such as that observed during traditional transport and dispersion field experiments. The method proves to be successful at recovering the unknown transport and dispersion parameters for a numerical experiment.     

BVOC emissions from mechanical wounding of leaves and branches of <Emphasis Type="Italic">Eucalyptus sideroxylon</Emphasis> (red ironbark)

Emissions of biogenic volatile organic compounds (BVOCs) from mechanical wounding of leaves and branches of plants can contribute to the atmospheric burden of volatile organic compounds (VOCs) in both (a) urban airsheds (from urban garden maintenance) and (b) the global atmosphere (from large scale forest harvesting). These emissions of BVOCs are poorly understood and quantified, and their role in urban and global emissions inventories neglected. This paper presents measurements of the magnitude, duration and composition of emissions of BVOCs, carbon dioxide (CO₂) and methane (CH₄) from freshly cut leaf mulch and wood chips derived from a common eucalypt tree, Eucalyptus sideroxylon (red ironbark), found in southeastern Australian forests and gardens. The emissions of BVOCs from freshly cut and shredded leaves and wood of E. sideroxylon were found to be 2.3 ± 0.6 and 0.05 ± 0.04 mg g^-1 DM (Dry Mass) from leaf mulch and wood chips respectively and to last typically for 1 day following cutting. Three sampling techniques were used for VOC speciation and the 12 most abundant BVOCs released from the mulch materials were identified. The specific BVOCs emitted in order of decreasing abundance from leaf mulch are: (a) stored plant oils, 1,8-cineole, α–pinene and o-cymene which make up the major part of the emissions, (b) a minor contribution from chemicals associated with environmental stress and wound defence, (Z)–3–hexenyl acetate, (E)-2-hexenal and (Z)-3-hexen-1-ol, and (c) a second minor contribution from metabolic products, acetaldehyde and acetone. The observed integrated emissions of BVOCs from leaves following mulching are equivalent to more than half and perhaps all of the likely stored plant oils in the leaves. For the two comparable studies available, one of a plant with stored oils (this study) and one of a plant without stored plant oils, the emissions of leaf wound defence BVOCs are in the same range for both plants. In the plant with stored plant oils, the plant oil emissions are about a factor of 11 larger in emission rate than the plant wound defence BVOCs. A compilation of available leaf wounding BVOC emission studies indicates that for plants with stored plant oils, plant oil emissions dominate, whereas with other plants, leaf wound defence BVOCs dominate the emissions.     

The internal structures and densities of asteroids

Abstract— Four asteroidal bodies (the Martian satellites Phobos and Deimos and the main-belt asteroids 243 Ida and 253 Mathilde) have now been the subjects of sufficiently close encounters by spacecraft that the masses and sizes and, hence, the densities of these bodies can be estimated to ～10%. All of these asteroids are significantly less dense than most members of the classes of meteorites identified as being compositionally most nearly similar to them on the basis of spectral characteristics. We show that two processes can act, independently or in concert, during the evolutionary histories of asteroids to produce a low bulk density. One of these processes is the result of one or more impact events and can affect any asteroid type, whereas the other can occur only for certain types of small asteroids that have undergone aqueous alteration.     

Reach-scale suspended sediment balance downstream from dams in a large Mediterranean river

Abstract

This paper presents a reach-scale sediment balance of a large impounded Mediterranean river (the lower Ebro, 1998–2008). Multi-temporal sediment storage and the influence of floods and tributaries on the sediment load were examined using continuous discharge and turbidity records. The mean annual suspended sediment load at the reach outlet (Xerta) is 0.12?×?10⁶ t, corroborating previous results. Suspended sediment concentrations were low (SSC_mean?=?13 mg L^-1), attaining a maximum of 274 mg L^-1. Erosion processes (channel-scour, bank erosion) are dominant, and net export of sediment occurs over the long term. Unexpectedly, ephemeral tributaries were found to contribute significantly: sediment delivered during torrential events attained 5% of the Ebro annual load, and was even larger than that in flushing flows. Overall, most of the suspended sediment load is transported by floods (up to 65% in some years). The results constitute basic information to underpin current management actions aiming to achieve the sustainability of the riverine and deltaic system.

Editor D. Koutsoyiannis; Associate editor D. Hughes

Citation Tena, A., Batalla, R.J. and Vericat, D., 2012. Reach-scale suspended sediment balance downstream from dams in a large Mediterranean river. Hydrological Sciences Journal, 57 (5), 831–849.     

Coupled groundwater flow and heat transport simulation for estimating transient aquifer–stream exchange at the lowland River Spree (Germany)

Subsurface flow and heat transport near Freienbrink, NE Germany, was simulated in order to study groundwater–surface water exchange between a floodplains aquifer and a section of the lowland River Spree and an adjacent oxbow. Groundwater exfiltration was the dominant process, and only fast surface water level rises resulted in temporary infiltration into the aquifer. The main groundwater flow paths are identified based on a 3D groundwater flow model. To estimate mass fluxes across the aquifer–surface water interfaces, a 2D flow and heat transport modelling approach along a transect of 12 piezometers was performed. Results of steady‐state and transient water level simulations show an overall high accuracy with a Spearman coefficient ρ = 0.9996 and root mean square error (RMSE) = 0.008 m. Based on small groundwater flow velocities of about 10^?7 to 10^?6 ms^?1, mean groundwater exfiltration rates of 233 l m^?2 d^?1 are calculated. Short periods of surface water infiltration into the aquifer do not exceed 10 days, and the infiltration rates are in the same range. The heat transport was modelled with slightly less accuracy (ρ = 0.8359 and RMSE = 0.34 °C). In contrast to the predominant groundwater exfiltration, surface water temperatures determine the calculated temperatures in the upper aquifer below both surface water bodies down to 10 m during the whole simulation period. These findings emphasize prevailing of heat conduction over advection in the upper aquifer zones, which seems to be typical for lowland streams with sandy aquifer materials and low hydraulic gradients. Moreover, this study shows the potential of coupled numerical flow and heat transport modelling to understand groundwater–surface water exchange processes in detail. Copyright © 2013 John Wiley & Sons, Ltd.     

Response of single benthic metrics and multi-metric methods to anthropogenic pressure gradients, in five distinct European coastal and transitional ecosystems

In recent times many benthic indices have been proposed to assess the ecological quality of marine waters worldwide. In this study we compared single metrics and multi-metric methods to assess coastal and transitional benthic status along human pressure gradients in five distinct environments across Europe: Varna bay and lake (Bulgaria), Lesina lagoon (Italy), Mondego estuary (Portugal), Basque coast (Spain) and Oslofjord (Norway). Hence, 13 single metrics (abundance, number of taxa, and several diversity and sensitivity indices) and eight of the most common indices used within the European Water Framework Directive (WFD) for benthic assessment were selected: index of size spectra (ISS), Benthic assessment tool (BAT), Norwegian quality index (NQI), Multivariate AMBI (M-AMBI), Benthic quality index (BQI), (Benthic ecosystem quality index (BEQI), Benthic index based on taxonomic sufficiency (BITS), and infaunal quality index (IQI). Within each system, sampling sites were ordered in an increasing pressure gradient according to a preliminary classification based on professional judgement. The different indices are largely consistent in their response to pressure gradient, except in some particular cases (i.e. BITS, in all cases, or ISS when a low number of individuals is present). Inconsistencies between indicator responses were most pronounced in transitional waters (i.e. IQI, BEQI), highlighting the difficulties of the generic application of indicators to all marine, estuarine and lagoonal environments. However, some of the single (i.e. ecological groups approach, diversity, richness) and multi-metric methods (i.e. BAT, M-AMBI, NQI) were able to detect such gradients both in transitional and coastal environments, being these multi-metric methods more consistent in the detection than single indices. This study highlights the importance of survey design and good reference conditions for some indicators. The agreement observed between different methodologies and their ability to detect quality trends across distinct environments constitutes a promising result for the implementation of the WFD’s monitoring plans. Moreover, these results have management implications, regarding the dangers of misclassification, uncertainty in the assessment, use of conflicting indices, and testing and validation of indices.