Predicting Soil-Water and Soil-Air Transport Properties and Their Effects on Soil-Vapor Extraction Efficiency

Accurate prediction of water and air Iran sport parameters in variably saturated soil is necessary for modeling of soil-vapor extraction (SVE) at soil sites contaminated with volatile organic chemicals (VOCs). An expression for predicting saturated water permeability (k_l,s) in undisturbed soils from the soil total porosity and the field capacity soil-water content was developed by fitting a tortuous-tube fluid flow model to measured water permeability and gas diffusivity data. The new k_l,s expression gave accurate predictions when tested against independent k_l,s data. The k_l,s expression was implemented in the Campbell relative water permeability model to yield a predictive model for water permeability in variably saturated, undisturbed soil. The water permeability model, together with recently developed predictive equations for gas permeability and gas diffusivity, was used in a two-dimensional numerical SVE model that also included non-equilibrium mass transfer of VOC from a separate phase (nonaqueous phase liquid [NAPL]) to the air phase. SVE: calculations showed that gas permeability is likely the most important factor controlling VOC migration and vapor extraction efficiency. Water permeability and gas diffusivity effects became significant at water contents near and above field capacity. The NAPL-air mass transfer coefficient also had large impacts on simulated vapor extraction efficiency. The calculations suggest that realistic SVE models need to include predictive expressions for both conveciive, diffusive. and phase-partitioning processes in natural, undisturbed soils.     

Gridded Croatian climatology for 1961–1990

In climatology, one of the most important pieces of information about the climate of a place or a region is information about the Climatological Normals (CLINO)—the average values of meteorological elements for a 30-year period. This kind of information usually comes in tables and is available for different observation sites from national meteorological services or from World Meteorological Organisation publications. The key issue, then, becomes how to interpolate these values over the entire area of interest to get reliable and accurate estimates (maps) of climatic elements. Here, the regression kriging framework has been applied for mapping of 20 climatological parameters for the 1961–1990 period for the 56,594 km² of Croatian territory, with a resolution of 1 km. In total, 152 main and climatological and 567 precipitation-measuring stations have been used in the analysis. Extensive pre-processing of metadata on station co-ordinates has been done, as well as completion of missing monthly averages. The final results are 20 climatological maps available in high resolution together with error maps and accuracy assessment measures.     

On the sulphur chemistry of a super-anoxic fjord, Framvaren, South Norway

The concentrations of total carbonate (C_t), sulphate, sulphide, thiols and oxygen, the ratio between the stable sulphur isotopes ³⁴S and ³²S in sulphate and sulphide, and the density (used to calculate salinity) were determined on samples from the water column of Framvaren, a superanoxic fjord in southern Norway. From a depth of 18m (the oxic-anoxic boundary) the initial sulphate concentration, ([SO₄]_init), as calculated from salinity, is significantly higher than the sum of the measured sulphur species. This is attributed to a loss of sulphur from the water column. The amount of total carbonate produced, corrected for the initial concentration (C_t - 2.4 Sal/35) is found to be proportional to the amount of sulphate consumed, ([SO₄]_init - [SO₄]), according to the following relation C_t- 2.4 Sal/35 = 1.84 ([SO₄]_init - [SO₄]). Isotopic fractionation caused by bacterial sulphate reduction in the anoxic part of the water column produces sulphide with a δ³⁴S 40‰ lower than the δ³⁴S for sulphate at corresponding depths. The isotopic fractionation also results in δ³⁴S value for the remaining sulphate at depths below 80 m being considerably higher than the mean value for ocean water, which is close to + 20‰. The δ³⁴S values for sulphate at depths between 10 and 50 m were lower than + 20‰ which indicates oxidation of sulphide, which follows upon diffusion of sulphide from deeper parts of the water column and inflow of oxygenated seawater over the sill into the anoxic water of the fjord. A conclusive scenario of the Framvaren sulphur chemistry is presented.     

High‐resolution bathymetric mapping reveals subaqueous glacial landforms in the Arctic alpine lake Tarfala,Sweden

In Arctic alpine regions, glacio‐lacustrine environments respond sensitively to variations in climate conditions, impacting, for example,glacier extent and rendering former ice‐contact lakes into ice distal lakes and vice versa. Lakefloors may hold morphological records of past glacier extent, but remoteness and long periods of ice cover on such lakes make acquisition of high‐resolution bathymetric datasets challenging. Lake Tarfala and Kebnepakte Glacier, located in the Kebnekaise mountains, northern Sweden, comprise a small, dynamic glacio‐lacustrine system holding a climate archive that is not well studied. Using an autonomous surface vessel, a high‐resolution bathymetric dataset for Lake Tarfala was acquired in 2016, from which previously undiscovered end moraines and a potential grounding line feature were identified. For Kebnepakte Glacier, structure‐from‐motion photogrammetry was used to reconstruct its shape from photographs taken in 1910 and 1945. Combining these methods connects the glacial landform record identified at the lakefloor with the centennial‐scale dynamic behaviour of Kebnepakte Glacier. During its maximum 20^th century extent, attained c. 1910, Kebnepakte Glacier reached far into Lake Tarfala, but had retreated onto land by 1945, at an average of 7.9 m year^–1. Copyright © 2019 John Wiley & Sons, Ltd.     

Towards a 4D topographic view of the Norwegian sea margin

The present-day topography/bathymetry of the Norwegian mainland and passive margin is a product of complex interactions between large-scale tectonomagmatic and climatic processes that can be traced back in time to the Late Silurian Caledonian Orogeny. The isostatic balance of the crust and lithosphere was clearly influenced by orogenic thickening during the Caledonian Orogeny, but was soon affected by post-orogenic collapse including overprinting of the mountain root, and was subsequently affected by a number of discrete extensional events eventually leading to continental break-up in Early Eocene time. In the mid-Jurassic the land areas experienced deep erosion in the warm and humid climate, forming a regional paleic surface. Rift episodes in the Late Jurassic and Early Cretaceous, with differential uplift along major fault zones, led to more pronounced topographic contrasts during the Cretaceous, and thick sequences of clastic sediments accumulated in the subsiding basins on the shelf. Following renewed extension in the Late Cretaceous, a new paleic surface developed in the Paleocene. Following break-up the margin has largely subsided thermally, but several Cenozoic shortening events have generated positive contraction structures. On the western side of the on-shore drainage divide, deeper erosion took place along pre-existing weakness zones, creating the template of the present day valleys and fjords. In the Neogene the mainland and large portions of the Barents Sea were uplifted. It appears that this uplift permitted ice caps to nucleate and accumulate during the Late Pliocene northern hemisphere climatic deterioration. The Late Pliocene to Pleistocene glacial erosion caused huge sediment aprons to be shed on to the Norwegian Sea and Barents Sea margins. Upon removal of the ice load the landmass adjusted isostatically, and this still continues today.     

Temperature fluctuations in interstellar dust grains

Temperature fluctuations in interstellar dust grains caused by absorption of ultraviolet photons are discussed. Temperature probability distributions are presented for various assumptions about the grain specific heat and far infrared emissivity. Grains smaller than or about 0.01 may suffer large temperature fluctuations and would spend most of their time at very low temperatures. The equilibrium temperature is not a good measure for most average temperatures of such grains. It is shown that, although small grains spend only a small fraction of their time at the higher temperatures, the emitted far infrared spectrum is significantly shifted towards shorter wavelengths than predicted for grains assumed to be at the equilibrium temperature.Invited contribution to the Proceedings of a Workshop onThermodynamics and Kinetics of Dust Formation in the Space Medium held at the Lunar and Planetary Institute, Houston, 6–8 September, 1978.     

Mangrove expansion and rainfall patterns in Moreton Bay, Southeast Queensland, Australia

Changes in rainfall pattern have been suggested as a mechanism for the landward incursion of mangrove into salt marsh. The aim of the research was to assess the relationship between rainfall patterns and the spatial distribution of mangrove forests at study sites in Moreton Bay, Southeast Queensland, Australia, over a 32-year period from 1972 to 2004. To identify periods of relatively consistent rainfall patterns points at which rainfall patterns changed (change-points) were identified using the non-parametric Pettitt–Mann–Whitney-Statistic and the cumulative sum technique. The change-points were then used to define the temporal periods over which changes to mangrove area were assessed. Both mangrove and salt marsh area were measured by digitizing aerial photographs acquired in 1972, 1990 (the year with the most significant change-point), and 2004. The rates of change in mangrove area pre-1990 (a wetter period) and post-1990 (a drier period) were estimated. A significant positive relationship was demonstrated between rainfall variables and landward mangrove expansion, but not for seaward expansion. We concluded that rainfall variability is one of the principal factors influencing the rate of upslope encroachment of mangrove. However, the rate of expansion may vary from site to site due to site-specific geomorphological and hydrological characteristics and the level of disturbance in the catchment.     

Solution chemistry studies and flotation behaviour of apatite,calcite and fluorite minerals with sodium oleate collector

The maximum flotation response for three naturally occurring calcium minerals, apatite, calcite and fluorite with sodium oleate collector correlated directly with the minimum interfacial tension of the air/solution interface. For fluorite and apatite the minimum surface tension occurred about the mid-pH region and was attributed to the formation of pre-micellar associated species in solution. In the case of calcite the minimum was observed at high pH since the presence of high concentrations of calcium ions in solution appeared to reduce the concentration of amphililic species in the low and mid-pH regions.Microelectrophoresis data demonstrated that the three minerals acquired a negative charge in sodium oleate solution, resulting from adsorption of oleate species on the mineral surfaces.The flotation behaviour of the systems were shown to be related to the species distribution diagrams suggesting that the role of the acid soap dimer, soap dimer, molecular and lattice species could make a significant contribution to the character and composition of the interfacial films.High flotation response was explained by strong adhesion between the hydrophobic particle and bubble. It was suggested that the reduction in surface tension may not be the major factor contributing to the flotation efficiency but indicated the presence of associated surfactant species in solution which could also synergistically adsorb at the solid/liquid interface, increasing the hydrophobic character of the mineral surface. This would maximize the magnitude of the contact angle and hence the strength of the adhesion between particle and bubble. This adsorption behaviour is not in general agreement with conventionally non-hydrolyzable collector theory which is usually based on electrostatic models.     

Velocity potential formulations of highly accurate Boussinesq-type models

The highly accurate Boussinesq-type equations of Madsen et al. (Madsen, P.A., Bingham, H.B., Schäffer, H.A., 2003. Boussinesq-type formulations for fully nonlinear and extremely dispersive water waves: Derivation and analysis. Proc. R. Soc. Lond. A 459, 1075–1104; Madsen, P.A., Fuhrman, D.R., Wang, B., 2006. A Boussinesq-type method for fully nonlinear waves interacting with a rapidly varying bathymetry. Coast. Eng. 53, 487–504); Jamois et al. (Jamois, E., Fuhrman, D.R., Bingham, H.B., Molin, B., 2006. Wave-structure interactions and nonlinear wave processes on the weather side of reflective structures. Coast. Eng. 53, 929–945) are re-derived in a more general framework which establishes the correct relationship between the model in a velocity formulation and a velocity potential formulation. Although most work with this model has used the velocity formulation, the potential formulation is of interest because it reduces the computational effort by approximately a factor of two and facilitates a coupling to other potential flow solvers. A new shoaling enhancement operator is introduced to derive new models (in both formulations) with a velocity profile which is always consistent with the kinematic bottom boundary condition. The true behaviour of the velocity potential formulation with respect to linear shoaling is given for the first time, correcting errors made by Jamois et al. (Jamois, E., Fuhrman, D.R., Bingham, H.B., Molin, B., 2006. Wave-structure interactions and nonlinear wave processes on the weather side of reflective structures. Coast. Eng. 53, 929–945). An exact infinite series solution for the potential is obtained via a Taylor expansion about an arbitrary vertical position z = zˆ. For practical implementation however, the solution is expanded based on a slow variation of zˆ and terms are retained to first-order. With shoaling enhancement, the new models obtain a comparable accuracy in linear shoaling to the original velocity formulation. General consistency relations are also derived which are convenient for verifying that the differential operators satisfy a potential flow and/or conserve mass up to the order of truncation of the model. The performance of the new formulation is validated using computations of linear and nonlinear shoaling problems. The behaviour on a rapidly varying bathymetry is also checked using linear wave reflection from a shelf and Bragg scattering from an undulating bottom. Although the new models perform equally well for Bragg scattering they fail earlier than the existing model for reflection/transmission problems in very deep water.