Matrix micrite δC and δO reveals synsedimentary marine lithification in Upper Jurassic Ammonitico Rosso limestones (Betic Cordillera, SE Spain)

Matrix micrites are a commonly used carbonate archive for the reconstruction of past environmental parameters, but one that is submitted to known limitations. Main reasons for the often ambiguous value of many micrite-based isotope data sets are the unknown origin of the micrite components and their poorly resolved diagenetic history. Here we present carbon and oxygen-isotope data retrieved from Oxfordian to Tithonian Ammonitico Rosso nodular micrites sampled from three sections in the Betic Cordillera (Southern Spain). All three sections were correlated and sampled using a rigorous biostratigraphic framework. A noteworthy feature is that analyzed matrix micrites are more conservative in terms of their isotopic composition than other carbonate materials commonly considered to resist diagenetic alteration under favourable circumstances. Remarkably, this refers not only to δ¹³C ratios, which reflect the typical Late Jurassic global trend, but also to δ¹⁸O ratios that range around 0.3‰. The ¹⁸O-enriched oxygen-isotope ratios are considered to represent diagenetic stabilization of carbonate ooze under the influence of marine porewaters within the sediment–water interphase (i.e., the immature sedimentary section, usually submitted to biogenic activity). This interpretation agrees with the very early lithification of micrite nodules with cements precipitated from marine porewaters, enriched by the dissolution of aragonite skeletals (i.e., ammonite shells). According to the model proposed, low sedimentation rates as well as rapid early marine differential cementation, under the influence of currents and seawater pumping, affected the sediment–water interphase of epioceanic swells where deposition resulted in early lithified Ammonitico Rosso facies. The data obtained show that special care must be taken to prevent oversimplified interpretations of carbonate archives, particularly in the context of epioceanic settings.     

Structural features of humic acids from a sedimentary sequence in the Guadiana estuary (Portugal–Spain border)

The structural characteristics of humic acids (HAs) from two different depths of a sedimentary sequence representing the last 13 kyr in the valley of Guadiana river estuary (SW Portugal/Spain border) have been approached using a combination of spectroscopic techniques, wet chemical degradation methods (sequential oxidation with sodium persulfate followed by KMnO₄, and oxidation with RuO₄) and analytical pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) in the presence and absence of tetramethylammonium hydroxyde (TMAH). The aim was to obtain complementary information on the sources and alteration of the organic matter (OM) provided by a previous study on the vertical distribution of terrestrial and phytoplankton biogeochemical markers in the sequence. Both the FT-IR (Fourier transformed infrared) and ¹³C NMR (nuclear magnetic resonance) spectra showed a close similarity with the structural characteristics of the HA samples. NMR signals in the alkyl region (0–45 ppm) as well as FT-IR band patterns typical for methoxyl-substituted aromatic rings pointed to the presence of an important aliphatic domain, as well as to lignin-derived compounds. This finding was confirmed using analytical pyrolysis. In addition, the main TMAH thermochemolysis products were typical lignin-derived methoxyphenols with both guaicyl and syringyl nuclei. The detection of methoxyphenol units with three to six carbon atom (C₃–C₆) side chains suggests that lignin and possibly suberin were only partially degraded. Compounds arising from proteins and polysaccharides were also detected, although in lesser and varying amount. The major products from persulfate oxidation were series of n-alkanes (C₁₆–C₃₃ with clear odd/even predominance) and n-fatty acids, both saturated (C₁₀–C₂₆ with strong even/odd predominance) and unsaturated, which may arise from the above aliphatic biomacromolecules. The major products from permanganate oxidation of the persulfate residue were α,ω-diacids (C₆–C₁₁) originating from oxidation of the ether bonds linking the building blocks constituting the core of the HA structure. Aromatic compounds (phenols, methoxy-dimethoxybenzene carboxylic acid and benzene di-, tri-, tetra- and pentacarboxylic acids), most probably derived from the aromatic backbone of the HAs, that may also include lignin moieties as well as other polyphenols (flavonoids and tannins) were also detected. The RuO₄ oxidation also released series of n-alkanes (C₁₆–C₃₃), linear saturated fatty acids (C₁₀–C₂₈) and α,ω-diacids (C₇–C₂₅), as well as traces of benzene polycarboxylic acids. Regarding the usefulness of the various techniques used, they provide complementary information. Indeed, spectroscopic techniques and analytical pyrolysis provide information on the backbone of the HAs, and on their origin, whereas the oxidative degradations provide different information on the structural features of the HA, particularly the nature of the linking between the building blocks. In general, the data support the idea that the HAs still contain information about the signature of aliphatic and aromatic biomacromolecules contributing to the OM deposited. The presence of lignin-derived residues suggests a large input from terrestrial carbon throughout the core.     

Regional stratigraphy and distribution of epigenetic stratabound celestine, fluorite, barite and Pb–Zn deposits in the MVT province of northeastern Mexico

Northeastern Mexico hosts numerous epigenetic stratabound carbonate-hosted low-temperature hydrothermal deposits of celestine, fluorite, barite and zinc-lead, which formed by replacement of Mesozoic evaporites or carbonate rocks. Such deposits can be permissively catalogued as Mississippi Valley-type (MVT) deposits. The deposits studied in the state of Coahuila are associated with granitic and metasedimentary basement highs (horsts) marginal or central to the Mesozoic Sabinas Basin. These horsts controlled the stratigraphy of the Mesozoic basins and subsequently influenced the Laramide structural pattern. The Sabinas Basin consists of ~6,000-m-thick Jurassic to Cretaceous siliciclastic, carbonate and evaporitic series. The MVT deposits are mostly in Barremian and in Aptian-Albian to Cenomanian formations and likely formed from basinal brines that were mobilized during the Laramide orogeny, although earlier diagenetic replacement of evaporite layers (barite and celestine deposits) and lining of paleokarstic cavities in reef carbonates (Zn–Pb deposits) is observed. Fluid inclusion microthermometry and isotopic studies suggest ore formation due to mixing of basinal brines and meteoric water. Homogenization temperatures of fluid inclusions range from 45°C to 210°C; salinities range from 0 to 26 wt.% NaCl equiv., and some inclusions contain hydrocarbons or bitumen. Sulfur isotope data suggest that most of the sulfur in barite and celestine is derived from Barremian to Cenomanian evaporites. Regional geology and a compilation of metallogenic features define the new MVT province of northeastern Mexico, which comprises most of the state of Coahuila and portions of the neighboring states of Nuevo León, Durango and, perhaps extends into Zacatecas and southern Texas. This province exhibits a regional metal zonation, with celestine deposits to the south, fluorite deposits to the north and barite and Zn–Pb deposits mostly in the central part.     

Mhd Leaky Waves in a Layered Plasma: II Mechanisms of Leakage

The application of Fourier analysis to study leaky waves has the advantage of simplicity, but it is not clear why the complex roots of the dispersion relations represent leaky waves, nor how the leakage occurs. We investigate the different kinds of leakage that can occur in a three layer plasma, and to which Fourier pseudomodes they are associated. We find four basic mechanisms, called surface mode ..., single interface ..., trapped wave ... and lost insulation leakage. These mechanisms appear in pure form only near certain limiting cases, in which the parameters of the problem take some special values. As soon as the parameters depart significantly from the limiting values, the behavior of the leaky wave complicates and mixtures of the mechanisms occur, in varying amounts. In consequence different points of the same complex branch of the spectrum may correspond to different mechanisms. All the complex branches of the spectrum correspond to leaky waves, but in general it is not possible to classify them according to type of leakage, except close to a limiting case. Since in a three layer configuration there are many of these, the spectrum of leaky waves is very complicated.     

Impacts of climate change on building energy demands in the intra-Americas region

It was recently reported a regional warming in the intra-Americas region where sea surface temperature exhibited increases exceeding 0.15 °C/decade and an accelerated air temperature rise that could impact building energy demands per capita (EDC). Reanalysis data is used herein to quantify the impacts of these warming trends on EDC. Results of the analysis depict a Southern Greater Antilles and inland South America with a positive annual EDC rate of 1–5 kWh per year. The Intergovernmental Panel on Climate Change (IPCC) Representative Concentration Pathways (RCP) 2.6 and 4.5 scenarios were selected to analyze energy demand changes in the twenty-first century. A multi-model ensemble forecasts an EDC increase of 9.6 and 23 kWh/month in the RCP2.6 and RCP4.5 at the end of the twenty-first century, which may increase average building cooling loads in the region by 7.57 GW (RCP2.6) and 8.15 GW (RCP4.5), respectively. Furthermore, 4 of 9 (RCP2.6) and 7 of 9 (RCP4.5) of the major countries in this region have EDCs ranging between 1887 and 2252 kWh/year at the end of this century. Therefore, increased energy production and improved energy infrastructure will be required to maintain ideal indoor building conditions at the end of the twenty-first century in these tropical coastal regions as consequence of a warmer climate.     

Recent Vertical Deformation in Mexicali Valley and its Relationship with Tectonics, Seismicity, and the Exploitation of the Cerro Prieto Geothermal Field, Mexico

—The interpretation of the results of regional and local leveling which began in 1977 in the Mexicali Valley and the local short profile precision leveling which started in 1994 are discussed. The relation of vertical deformations around the Cerro Prieto Geothermal Field (CPGF) and along the Imperial fault, with local tectonics and seismicity in the Mexicali Valley, is reviewed. Also the relation between vertical deformation and fluid operation in the CPGF is analyzed. The subsidence observed in the field seems to be induced by fluid extraction. The way in which fluid production influences surface changes along the Imperial fault is not clear. The possibility that seismicity is triggering subsidence in the area and vertical movement on the Imperial fault is discussed.     

Structural and kinematic analysis of the Corredoiras detachment: evidence for early Variscan synconvergent extension in the Ordenes Complex, NW Spain

 An important detachment is described in the allochthonous Ordenes Complex, in the NW Iberian Massif, and its meaning is related to the kinematics of contemporaneous convergent structures. The Corredoiras Detachment (CD) separates a hangingwall unit, characterised by a medium-pressure metamorphic gradient, from a footwall high-pressure and high-temperature unit and an underlying ophiolitic unit. An associated ductile shear zone, nearly 2000 m thick, developed in the lower part of the hangingwall unit, where the Corredoiras Orthogneiss, a Lower Ordovician metagranite, was progressively transformed into augengneisses, mylonitic and ultramylonitic gneisses. The attitude of the stretching and mineral lineation in the mylonites varies due to late refolding at map scale, but the sense of movement can be estimated, being roughly top to the SE. According to crosscutting relationships, the CD developed subsequent to the thrusting of the high-pressure/high-temperature unit onto the ophiolitic unit, and prior to younger extensional detachments, upright folding and strike-slip tectonics. The geometric relationships of the CD with the previous structures in the footwall unit, the subtractive character of the metamorphic gap between its hangingwall and footwall, and the available isotopic data suggest that the CD is an early Variscan, ductile extensional detachment, the movement of which was roughly simultaneous with the onset of thrusting of the allochthonous complexes over their relative autochthon. Received: 17 November 1998 / Accepted: 4 April 1999