极地深部冰层取心钻探孔壁水压致裂研究

为了维护极地深部冰层取心钻探工作中钻孔的稳定,避免孔内事故的发生,冰层孔壁的水压致裂问题是亟待解决的重要科学问题之一。本文在深入分析国内外冰层钻探资料的基础上,结合冰盖动力学相关理论,计算得出了钻孔所在区域冰层的密度、温度及内部应力随深度的变化规律。在此基础上,结合油气资源勘探水力压裂技术与冰层钻进钻井液等相关理论,建立了合理的孔壁压差计算方法,深入探讨了适用于深部冰层钻探孔壁水压致裂机理。研制了冰层钻孔水压致裂模拟实验装置,可分析研究不同围压条件下冰样的脆性变形机理。结合我国Dome A深冰心钻探工程实际,提出钻孔可能发生水压致裂的深度区域及孔壁所需的起始裂纹长度判定,以期为后续的安全高效冰层钻进提供重要的理论依据。     

Chemical composition and physical properties of lithium-iron micas from the Krušné hory Mts. (Erzgebirge)

Compositions of natural lithium-iron micas are approximated best by the sidero-phyllite-polylithionite join. These micas contain little or no magnesium and manganese. Their octahedral sheets contain close to two trivalent cations (mainly aluminum) in small crystallographic sites and a variable quantity of lithium and R⁺² (mainly iron) in large sites. Octahedral vacancies are situated mostly in large sites. Lithium and R⁺² approach a 44 replacement relationship in micas with octahedral occupancy close to six. Lithium and fluorine show a good positive correlation (small excess of fluorine over lithium), which indicates a crystallochemical association between them. There is a less distinct positive correlation between lithium and R⁺⁴.Based on simplifications, a calculation shows that about two-thirds of octahedral vacancies are caused by substitutions within the octahedral sheet, one-third, by tetrahedral substitutions. Different methods of calculating the crystallochemical formula yield slightly different numbers of octahedral vacancies, but do not affect the mica's position in plots of physical parameters against composition. If a crystallochemical formula is calculated from analysis of a mica contaminated with quartz, topaz, or feldspar, the apparent number of octahedral vacancies increases; such a formula exhibits unusual behavior in composition plots.     

Deciphering petrogenic processes using Pb isotope ratios from time-series samples at Bezymianny and Klyuchevskoy volcanoes,Central Kamchatka Depression

The Klyuchevskoy group of volcanoes in the Kamchatka arc erupts compositionally diverse magmas (high-Mg basalts to dacites) over small spatial scales. New high-precision Pb isotope data from modern juvenile (1956–present) erupted products and hosted enclaves and xenoliths from Bezymianny volcano reveal that Bezymianny and Klyuchevskoy volcanoes, separated by only 9 km, undergo varying degrees of crustal processing through independent crustal columns. Lead isotope compositions of Klyuchevskoy basalts–basaltic andesites are more radiogenic than Bezymianny andesites (²⁰⁸Pb/²⁰⁴Pb = 37.850–37.903, ²⁰⁷Pb/²⁰⁴Pb = 15.468–15.480, and ²⁰⁶Pb/²⁰⁴Pb = 18.249–18.278 at Bezymianny; ²⁰⁸Pb/²⁰⁴Pb = 37.907–37.949, ²⁰⁷Pb/²⁰⁴Pb = 15.478–15.487, and ²⁰⁶Pb/²⁰⁴Pb = 18.289–18.305 at Klyuchevskoy). A mid-crustal xenolith with a crystallization pressure of 5.2 ± 0.6 kbars inferred from two-pyroxene geobarometry and basaltic andesite enclaves from Bezymianny record less radiogenic Pb isotope compositions than their host magmas. Hence, assimilation of such lithologies in the middle or lower crust can explain the Pb isotope data in Bezymianny andesites, although a component of magma mixing with less radiogenic mafic recharge magmas and possible mantle heterogeneity cannot be excluded. Lead isotope compositions for the Klyuchevskoy Group are less radiogenic than other arc segments (Karymsky—Eastern Volcanic Zone; Shiveluch—Northern Central Kamchatka Depression), which indicate increased lower-crustal assimilation beneath the Klyuchevskoy Group. Decadal timescale Pb isotope variations at Klyuchevskoy demonstrate rapid changes in the magnitude of assimilation at a volcanic center. Lead isotope data coupled with trace element data reflect the influence of crustal processes on magma compositions even in thin mafic volcanic arcs.     

Late orogenic extension in the Bohemian Massif: petrostructural evidence in the Hlinsko region

Abstract

The tectonic contact between low-grade metase-dimentary series and high-grade rocks in the Hlinsko region (Bohemian Massif) is commonly interpreted as a thrust of the Barrandian sediments over the upper Moldanubian nappe.

The sediments occur in an E-facing synform that contains a tonalitic laccolith on its eastern boundary with the Moldanubian, and is truncated by a granodiorite pluton to the west. The synform represents a late deformational folding event related to the granodiorite intrusion. NW-oriented normal shear in the tonalite is indicated by S-C microstructures. Kinematic criteria associated with the major foliation and lineation development in the metasediments also indicate a north-westward, normal shear. In addition, Moldanubian gneiss display late shear bands due to north-westward, normal shear. Consequently, the presumed thrust is a low-angle, normal shear zone.

Low-pressure type metamorphism (3 < P < 4 x 10² MPa) coeval with the major deformational phase in pelites of the Hlinsko synform is attributed to both the tonalite aureole and the extensive HT metamorphism (under P > 6 x 10² MPa) that has affected the underlying Moldanubian.

The possibly polyphase normal fault is consistent with the meta-morphic pressure jump between the metasediments and the Moldanubian.

We suggest that the tonalite intruded syntectonically within the normal ductile shear zone active during waning stages of the Variscan orogeny.     

极地冰层回转钻进切削热量测试装置的研制

极地冰盖深部“暖冰”层钻进时,由于冰层的温度较高,接近甚至达到冰的压力熔点,回转钻进时产生的切削热量极易使冰屑融化,导致机械钻速慢、取心率低、卡钻事故频发。钻压、转速、切削具结构等参数均对切削热量有一定的影响,有必要设计一套实验装置对切削热量进行测试,从而为设计切削具结构、优化钻进参数组合提供理论依据。以XY-1型岩心钻机钻进系统为平台,利用无线信号传输原理设计了冰层回转钻进切削热量测试实验台。初步测试结果表明,该实验装置能够准确测量钻压、扭矩、切削温度等参数,可用来进行相关的实验研究。     

Spectral expressions for modelling the gravitational field of the Earth’s crust density structure

We derive expressions for computing the gravitational field (potential and its radial derivative) generated by an arbitrary homogeneous or laterally varying density contrast layer with a variable depth and thickness based on methods for a spherical harmonic analysis and synthesis of gravity field. The newly derived expressions are utilised in the gravimetric forward modelling of major known density structures within the Earth’s crust (excluding the ocean density contrast) beneath the geoid surface. The gravitational field quantities due to the sediments and crust components density contrasts, shown in numerical examples, are computed using the 2 × 2 arc-deg discrete data from the global crustal model CRUST2.0. These density contrasts are defined relative to the adopted value of the reference crustal density of 2670 kgm⁻³. All computations are realised globally on a 1 × 1 arc-deg geographical grid at the Earth’s surface. The maxima of the gravitational signal due to the sediments density contrast are mainly along continental shelf regions with the largest sedimentary deposits. The corresponding maxima due to the consolidated crust components density contrast are over areas of the largest continental crustal thickness with variable geological structure.     

A structurally adequate model of the geomagnetosphere

The structurally adequate model of the geomagnetosphere consists of the following modules: A. Bow shock as a source of power for magnetospheric processes. B. The generation of magnetospheric convection. C. The plasma pressure distribution in the magnetosphere and electron-proton precipitations into the ionosphere. D. The magnetosphere-ionosphere coupling. Field-aligned currents. Essentially, each module presented in an analytical form is a model of a particular process described in physical terms. It has an input and output to couple with other modules. When combined, the modules comprise a single large physically adequate model describing a phenomenon in such a way that we understand its essence and contribution of each physical process into the overall picture.     

Evaluation of the seismic hazard for 20 cities in Romania using Monte Carlo based simulations

This work focuses on the evaluation of the seismic hazard for Romania using earthquake catalogues generated by a Monte Carlo approach. The seismicity of Romania can be attributed to the Vrancea intermediate-depth seismic source and to 13 other crustal seismic sources. The recurrence times of large magnitude seismic events (both crustal and subcrustal), as well as the moment release rates are computed using simulated earthquake catalogues. The results show that the largest contribution to the overall moment release for the crustal seismic sources is from the seismic regions in Bulgaria, while the seismic regions in Romania contribute less than 5% of the overall moment release. In addition, the computations show that the moment release rate for the Vrancea subcrustal seismic source is about ten times larger than that of all the crustal seismic sources. Finally, the Monte Carlo approach is used to evaluate the seismic hazard for 20 cities in Romania with populations larger than 100,000 inhabitants. The results show some differences between the seismic hazard values obtained through Monte-Carlo simulation and those in the Romanian seismic design code P100-1/2013, notably for cities situated in the western part of Romania that are influenced by local crustal seismic sources.     

Rainfall-induced landslide event of May 2010 in the eastern part of the Czech Republic

More than 150 landslides originated in the eastern part of the Czech Republic (region of the Flysch Outer Western Carpathians—hereinafter, OWC) due to soil saturation caused by antecedent precipitation and long lasting and intensive rainfalls on 16–18 May 2010 (>300 mm as measured by some stations). As a consequence, a multitude of small failures originated 88% of which was smaller than 10⁴ m². Most landslides are characterised as shallow (<10 m) or middle–deep (10–30 m) incipient (rather short travel) landslides, debris slides and soil slips spatially clustered to a geological domain underlain by rather weak thin-bedded flysch and unconsolidated Quaternary deposits. An exception to this is represented by a kilometre-long rockslide (∼2–3 mil m³) affecting tectonically weakened and weathered claystone/mudstone-dominated flysch on the southern slope of Mt. Girová (the Beskydy Mountains). The rockslide is one of the largest long runout landslides in the territory of the Czech Republic activated over the past few decades as it reaches the dimensions of the largest documented Holocene long runout landslides in the Czech part of the OWC. A majority of the May 2010 landslide events developed inside older (Holocene or historic) landslide terrains, which points to their spatial persistency and recurrent nature. In spite of the fact that the May 2010 landslide event was not as destructive as some previous landslide activisation in the OWC region (e.g. July 1997 event), it left many slope failures at the initial stage of their potential future reactivation.     

High‐temperature gold‐copper extraction with chloride flux in lava tubes of Tolbachik volcano (Kamchatka)

Subvolcanic environments in supra‐subduction zones are renowned for hosting epithermal deposits that often contain electrum and native gold, including bonanza examples. This study examined mineral assemblages and processes occurring in shallow‐crust volcanic settings using recent eruption (2012–2013) of the basaltic Tolbachik volcano in the Kamchatka arc. The Tolbachik eruptive system is characterized by an extensive system of lava tubes. After cessation of magma input, the tubes maintained the flow of hot oxidized gases that episodically interacted with the lava surfaces and sulphate‐chloride precipitates from volcanic gases on these surfaces. The gas‐rock interaction had strong pyrometamorphic effects that resulted in the formation of molten salt, oxidized (tenorite, hematite, Cu‐rich magnesioferrite) and skarn‐like silicate mineral assemblages. By analogy with experimental studies, we propose that a combination of these processes was responsible for extraction of metals from the basaltic wall rocks and deposition of Cu‐, Fe‐ and Cu‐Fe‐oxides and native gold.