Geology of the Victor Kimberlite, Attawapiskat, Northern Ontario, Canada: cross-cutting and nested craters

The pipe shapes, infill and emplacement processes of the Attawapiskat kimberlites, including Victor, contrast with most of the southern African kimberlite pipes. The Attawapiskat kimberlite pipes are formed by an overall two-stage process of (1) pipe excavation without the development of a diatreme (sensu stricto) and (2) subsequent pipe infilling. The Victor kimberlite comprises two adjacent but separate pipes, Victor South and Victor North. The pipes are infilled with two contrasting textural types of kimberlite: pyroclastic and hypabyssal-like kimberlite. Victor South and much of Victor North are composed of pyroclastic spinel carbonate kimberlites, the main features of which are similar: clast-supported, discrete macrocrystal and phenocrystal olivine grains, pyroclastic juvenile lapilli, mantle-derived xenocrysts and minor country rock xenoliths are set in serpentine and carbonate matrices. These partly bedded, juvenile lapilli-bearing olivine tuffs appear to have been formed by subaerial fire-fountaining airfall processes.

The Victor South pipe has a simple bowl-like shape that flares from just below the basal sandstone of the sediments that overlie the basement. The sandstone is a known aquifer, suggesting that the crater excavation process was possibly phreatomagmatic. In contrast, the pipe shape and internal geology of Victor North are more complex. The northwestern part of the pipe is dominated by dark competent rocks, which resemble fresh hypabyssal kimberlite, but have unusual textures and are closely associated with pyroclastic juvenile lapilli tuffs and country rock breccias±volcaniclastic kimberlite. Current evidence suggests that the hypabyssal-like kimberlite is, in fact, not intrusive and that the northwestern part of Victor North represents an early-formed crater infilled with contrasting extrusive kimberlites and associated breccias. The remaining, main part of Victor North consists of two macroscopically similar, but petrographically distinct, pyroclastic kimberlites that have contrasting macrodiamond sample grades. The juvenile lapilli of each pyroclastic kimberlite can be distinguished only microscopically. The nature and relative modal proportion of primary olivine phenocrysts in the juvenile lapilli are different, indicating that they derive from different magma pulses, or phases of kimberlite, and thus represent separate eruptions. The initial excavation of a crater cross-cutting the earlier northwestern crater was followed by emplacement of phase (i), a low-grade olivine phenocryst-rich pyroclastic kimberlite, and the subsequent eruption of phase (ii), a high-grade olivine phenocryst-poor pyroclastic kimberlite, as two separate vents nested within the original phase (i) crater. The second eruption was accompanied by the formation of an intermediate mixed zone with moderate grade. Thus, the final pyroclastic pipe infill of the main part of the Victor North pipe appears to consist of at least three geological/macrodiamond grade zones.

In conclusion, the Victor kimberlite was formed by several eruptive events resulting in adjacent and cross-cutting craters that were infilled with either pyroclastic kimberlite or hypabyssal-like kimberlite, which is now interpreted to be of probable extrusive origin. Within the pyroclastic kimberlites of Victor North, there are two nested vents, a feature seldom documented in kimberlites elsewhere. This study highlights the meaningful role of kimberlite petrography in the evaluation of diamond deposits and provides further insight into kimberlite emplacement and volcanism.     

Multi‐stage Melting Processes of Ophiolitic Chromitites from Purang Peridotite,the Western Yarlung‐Zangbo Suture Zone,Tibet

The Purang ophiolite, which crops out over an area of about 600 km2 in the western Yarlung‐Zangbo suture zone, consists chiefly of mantle peridotite, pyroxenite and gabbro. The mantle peridotites are mostly harzburgite and minor lherzolite that locally host small pods of dunite. Some pyroxenite and gabbro veins of variable size occur in the peridotites, and most of them strike NW. On the basis of their mineral chemistry podiform chromitites are divided into high‐alumina (Cr# = 20‐60) (Cr# = 100*Cr/(Cr+Al)) and high‐chromium (Cr# = 60‐80) varieties (Thayer, 1970). Typically, only one type occurs in a given peridotite massif, although some ophiolites contain several massifs which can have different chromitite compositions. However, the Purang massif contains both high chrome and high alumina chromitites within a single mafic‐ultramafic body. Seven small, lenticular bodies of chromitite ore have been found in the harzburgite, with ore textures ranging from massive to disseminated to sparsely disseminated; no nodular ore has been observed. Individual ore bodies are 2‐6 m long, 0.5‐2 m wide and strike NW, parallel to the main structure of the ophiolite. Ore bodies 1 and 6 consist of Al‐rich chromitite (Cr# = 52‐55), whereas orebodies 2, 3, 4 and 5 are Cr‐rich varieties (Cr # = 63 to 89). In addition to magnesiochromite, all of the orebodies contain minor olivine, amphibole and serpentine. Mineral structures show that the peridotites experienced plastic deformation and partial melting. On the basis of magnesiochromite and olivine/clinopyroxene compositions two stages of partial melting are identified in the Purang peridotites, an early low‐partial melting event (about 8%), and a later high‐partial melting event (about 40%). We interpret the Al‐rich chromitites as the products of early MORB magmas, whereas the Cr‐rich varieties are thought to have been generated by the later SSZ melts..     

Impact of single-point GPS integrated water vapor estimates on short-range WRF model forecasts over southern India

Specifying physically consistent and accurate initial conditions is one of the major challenges of numerical weather prediction (NWP) models. In this study, ground-based global positioning system (GPS) integrated water vapor (IWV) measurements available from the International Global Navigation Satellite Systems (GNSS) Service (IGS) station in Bangalore, India, are used to assess the impact of GPS data on NWP model forecasts over southern India. Two experiments are performed with and without assimilation of GPS-retrieved IWV observations during the Indian winter monsoon period (November–December, 2012) using a four-dimensional variational (4D-Var) data assimilation method. Assimilation of GPS data improved the model IWV analysis as well as the subsequent forecasts. There is a positive impact of ～10 % over Bangalore and nearby regions. The Weather Research and Forecasting (WRF) model-predicted 24-h surface temperature forecasts have also improved when compared with observations. Small but significant improvements were found in the rainfall forecasts compared to control experiments.     

Fingerprinting of the Atlantic meridional overturning circulation in climate models to aid in the design of proxy investigations

It is desirable to design proxy investigations that target regions where properties reconstructed from calibrated parameters potentially carry high-fidelity information concerning changes in large-scale climate systems. Numerical climate models can play an important role in this task, producing simulations that can be analyzed to produce spatial “fingerprints” of the expected response of various properties under a variety of different scenarios. We will introduce a new method of fingerprinting the Atlantic meridional overturning circulation (AMOC) that not only provides information concerning the sensitivity of the response at a given location to changes in the large-scale system, but also quantifies the linearity, monotonicity and symmetry of the response. In this way, locations that show high sensitivities to changes in the AMOC, but that exhibit, for example, strongly nonlinear behavior can be avoided during proxy investigations. To demonstrate the proposed approach we will use the example of the response of seawater temperatures to changes in the strength of the AMOC. We present results from an earth-system climate model which has been perturbed with an idealized freshwater forcing scenario in order to reduce the strength of the AMOC in a systematic manner. The seawater temperature anomalies that result from the freshwater forcing are quantified in terms of their sensitivity to the AMOC strength in addition to the linearity and monotonicity of their response. A first-order reversal curve (FORC) approach is employed to investigate and quantify the irreversibility of the temperature response to a slowing and recovering AMOC. Thus, FORCs allow the identification of areas that are unsuitable for proxy reconstructions because their temperature versus AMOC relationship lacks symmetry.     

Structure and oxidation state of hematite surfaces reacted with aqueous Fe(II) at acidic and neutral pH

Structural changes and surface oxidation state were examined following the reaction of hematite (0 0 1), (0 1 2), and (1 1 0) with aqueous Fe(II). X-ray reflectivity measurements indicated that Fe(II) induces changes in the structure of all three surfaces under both acidic (pH 3) and neutral (pH 7) conditions. The structural changes were generally independent of pH although the extent of surface transformation varied slightly between acidic and neutral conditions; no systematic trends with pH were observed. Induced changes on the (1 1 0) and (0 1 2) surfaces include the addition or removal of partial surface layers consistent with either growth or dissolution. In contrast, a <1 nm thick, discontinuous film formed on the (0 0 1) surface that appears to be epitaxial yet is not a perfect extension of the underlying hematite lattice, being either structurally defective, compositionally distinct, or nanoscale in size and highly relaxed. Resonant anomalous X-ray reflectivity measurements determined that the surface concentration of Fe(II) present after reaction at pH 7 was below the detection limit of approximately 0.5-1 μmol/m² on all surfaces. These observations are consistent with Fe(II) oxidative adsorption, whereby adsorbed Fe(II) is oxidized by structural Fe(III) in the hematite lattice, with the extent of this reaction controlled by surface structure at the atomic scale. The observed surface transformations at pH 3 show that Fe(II) oxidatively adsorbs on hematite surfaces at pH values where little net adsorption occurs, based on historical macroscopic Fe(II) adsorption behavior on fine-grained hematite powders. This suggests that Fe(II) plays a catalytic role, in which an electron from an adsorbed Fe(II) migrates to and reduces a lattice Fe(III) cation elsewhere, which subsequently desorbs in a scenario with zero net reduction and zero net adsorption. Given the general pH-independence and substantial mass transfer involved, this electron and atom exchange process appears to be a significant subsystem within macroscopic pH-dependent Fe(II) adsorption.     

Sorption behaviour of pentachlorophenol in sub-Saharan tropical soils: soil types sorption dynamics

In order to predict exposure risks as well as appropriate remediation strategies for pesticides in soils, knowledge of pesticides sorption processes onto various representative soils is vital. Hence, laboratory batch experiments were carried out to study sorption of a pesticide, pentachlorophenol (PCP), on five soils obtained from different sub-Saharan agro-ecological zones (AEZs) in order to understand sorption equilibrium, kinetics, and thermodynamics. Experimental data showed that sorption equilibrium was attained within 24 h. The fitting of kinetic results and equilibrium data to different models suggested partly surface adsorption and partly partitioning of PCP within voids of the various soil components. Sorption was mainly attributed to sharing or exchange of valence electrons between negatively charged PCP molecules and positively charged soil sorption sites. The sorption process was spontaneous and accompanied by decreased entropy, but was pH and temperature dependent, reducing with increase in pH and temperature. The various soils’ PCP sorption capacities were directly proportional to their cation exchange capacities. The low PCP sorption observed in these soils suggested high risk of PCP being present in soil water solution, especially at higher temperatures, which can lead to contamination of the aquifer. This risk may be higher for soils obtained from AEZs with warmer natural temperatures.     

GGR Critical Review of Analytical Developments in 2003

The articles that comprise this critical review serve to draw attention to research papers published in specific fields of interest during 2003, provide critical comment on the relevance and importance of individual publications in these fields, and offer an overview of the comparative importance of advances in particular areas. In this way, these articles aim to assist experts in the field by keeping them informed of relevant recent publications, as well as providing an important resource for students or early career researchers who are embarking on studies in an area new to them. This year, five papers provide summaries of developments in bulk sample determinations employing (1) ICP-AES and ICP-MS (trace elements), (2) XRF and atomic absorption spectrometry and INAA, (3) isotope ratio measurements (TIMS, MC-ICP-MS, ICP-MS, ToF), as well as in situ measurements conducted using (4) secondary ion mass spectrometry and (5) laser ablation ICP-MS (trace element and isotope ratio determinations).     

Class distribution and locality in rural areas: an example from Gloucestershire

The analysis of rural social change has reached a point of somewhat saturated orthodoxy. Numerous studies over the last 20 years have served to reinforce a standard view that it is the ‘newcomer vs local’ conflict which lies at the heart of social and cultural changes in rural communities. Moreover, these broad categorisations have often been translated into class terms without due regard for the detailed circumstances of locality or intra-class fractions. This paper presents some evidence from an intensive study of 10 parishes in rural Gloucestershire, and seeks to provide a detailed background to the distribution of selected indicators of social change in that area. It focuses on the diversions and needs experienced by different social groups and suggests additional complexities to those recognised in traditional treatments of rural conflict.     

Scalar Fluxes Near a Tall Building in an Aligned Array of Rectangular Buildings

Scalar dispersion from ground-level sources in arrays of buildings is investigated using wind-tunnel measurements and large-eddy simulation (LES). An array of uniform-height buildings of equal dimensions and an array with an additional single tall building (wind tunnel) or a periodically repeated tall building (LES) are considered. The buildings in the array are aligned and form long streets. The sensitivity of the dispersion pattern to small changes in wind direction is demonstrated. Vertical scalar fluxes are decomposed into the advective and turbulent parts and the influences of wind direction and of the presence of the tall building on the scalar flux components are evaluated. In the uniform-height array turbulent scalar fluxes are dominant, whereas the tall building produces an increase of the magnitude of advective scalar fluxes that yields the largest component. The presence of the tall building causes either an increase or a decrease to the total vertical scalar flux depending on the position of the source with respect to the tall building. The results of the simulations can be used to develop parametrizations for street-canyon dispersion models and enhance their capabilities in areas with tall buildings.     

Atmospheric effects from post-nuclear fires

During a large nuclear war, the atmosphere would be loaded with huge quantities of pollutants, which are produced by fires in urban and industrial centers, cultivated lands, forests and grasslands. Especially detrimental are the effects of light absorbing airborne particles. An analysis of the amounts of the various types of fuels which could burn in a nuclear war indicates that more than 10¹⁴ g of black smoke could be produced by fires started by the nuclear explosions. Due to this, the penetration of sunlight to the earth's surface would be reduced greatly over extended areas of the northern hemisphere, maybe even globally. This could temporarily cause extreme darkness in large areas in midlatitudes and reduce crop growth and biospheric productivity.This situation would last for several weeks and cause very anomalous meteorological conditions. Much solar radiation would be absorbed in the atmosphere instead of at the earth's surface. The land areas and lower atmosphere would, therefore, cool and the overlying atmosphere warm, creating strong vertical thermal stability in a highly polluted atmosphere. For extended periods and in large parts of the world, weather conditions would be abnormal. The resulting cold, probably freezing, temperatures at the ground would interfere severely with crop production during the growing season and cause extreme conditions for large sections of the biosphere. The combination of lack of sunlight, frost and other adverse meteorological conditions would add enormously to the already huge problems of the survivors.