Initiation of large-volume silicic centers in the Yellowstone hotspot track: insights from H<Subscript>2</Subscript>O- and F-rich quartz-hosted rhyolitic melt inclusions in the Arbon Valley Tuff of the Snake River Plain

During the onset of caldera cluster volcanism at a new location in the Snake River Plain (SRP), there is an increase in basalt fluxing into the crust and diverse silicic volcanic products are generated. The SRP contains abundant and compositionally diverse hot, dry, and often low-δ¹⁸O silicic volcanic rocks produced through time during the formation of individual caldera clusters, but more H₂O-rich eruptive products are rare. We report analyses of quartz-hosted melt inclusions from pumice clasts from the upper and lower Arbon Valley Tuff (AVT) to gain insight into the initiation of caldera cluster volcanism. The AVT, a voluminous, caldera-forming rhyolite, represents the commencement of volcanism (10.44 Ma) at the Picabo volcanic field of the Yellowstone hotspot track. This is a normal δ¹⁸O rhyolite consisting of early and late erupted members (lower and upper AVT, respectively) with extremely radiogenic Sr isotopes and unradiogenic Nd isotopes, requiring that ~50 % of the mass of these elements is derived from melts of Archean upper crust. Our data reveal distinctive features of the early erupted lower AVT melt including: variable F concentrations up to 1.4 wt%, homogenous and low Cl concentrations (~0.08 wt%), H₂O contents ranging from 2.3 to 6.4 wt%, CO₂ contents ranging from 79 to 410 ppm, and enrichment of incompatible elements compared to the late erupted AVT, subsequent Picabo rhyolites, SRP rhyolites, and melt inclusions from other metaluminous rhyolites (e.g., Bishop Tuff, Mesa Falls Tuff). We couple melt inclusion data with Ti measurements and cathodoluminescence (CL) imaging of the host quartz phenocrysts to elucidate the petrogenetic evolution of the AVT rhyolitic magma. We observe complex and multistage CL zoning patterns, the most critical being multiple truncations indicative of several dissolution–reprecipitation episodes with bright CL cores (higher Ti) and occasional bright CL rims (higher Ti). We interpret the high H₂O, F, F/Cl, and incompatible trace element concentrations in the context of a model involving melting of Archean crust and mixing of the crustal melt with basaltic differentiates, followed by multiple stages of fractional crystallization, remelting, and melt extraction. This multistage process, which we refer to as distillation, is further supported by the complex CL zoning patterns in quartz. We interpret new Δ¹⁸O(Qz-Mt) isotope measurements, demonstrating a 0.4 ‰ or ~180 °C temperature difference, and strong Sr isotopic and chemical differences between the upper and lower AVT to represent two separate eruptions. Similarities between the AVT and the first caldera-forming eruptions of other caldera clusters in the SRP (Yellowstone, Heise and Bruneau Jarbidge) suggest that the more evolved, lower-temperature, more H₂O-rich rhyolites of the SRP are important in the initiation of a caldera cluster during the onset of plume impingement.     

Reconstruction of Holocene paleohydrological and sedimentological characteristics of Umm Ar-Rimam basin (northern Kuwait)

The paleohydrological and sedimentological characteristics of a playa lake in northern Kuwait (Arabian Gulf) are reconstructed using sedimentological, geochemical, and isotopic techniques. The sequence consists of up to 8 cycles of S-poor, alluvial sediments capped by a thin organic soil interbedded with gravity-fall calcrete sediments. The succession is locally derived from mainly Quaternary sediments and is regressive with upsection filling of the subsiding basin by cycles of sheetwash flow in response to climatic change. There is no natural, open-water lake water as indicated by low total organic carbon (TOC) data, but the presence of incised calcrete yardangs suggests that more extensive open-water conditions were operative in the past. Stable isotope (δ¹⁸O‰ and δ¹³C‰) values of the authigenic carbonates indicate the following three distinct processes: evaporation, meteoric fluid infiltration, and rapid per-descensum flow (rapid downward movement of water and playa sediment through pipes) through a porous, clastic sequence. Because evaporites are scarce, other factors besides evaporation action control chemical and isotopic compositions of the per-decensum lake fluids. Consequently, the isotopic composition cannot be interpreted exclusively as an indicator of salinity or evaporation ratio. The degassing of CO₂ during groundwater discharge may explain the enriched carbon isotope values for the authigenic carbonates precipitated in the sediments. Hydrologically closed lake water bodies tend to show low negative carbonate oxygen and carbon isotopic signatures. Isotopically negative δ¹³C values imply a strong input of soil-zone carbon to the groundwater of the top 60 cm of the sediment. Lakes that are hydrologically closed and evaporate or equilibrate with atmospheric CO₂ will tend to have low negative δ¹⁸O and δ¹³C values in the carbonates as reported by Talbot (Chem Geol: Isotope Geosci Sect 80(4):261–279, 1990). Biologically active lakes will tend toward lower δ¹³C of dissolved carbon due to the photosynthetic effects of ¹²C withdrawal as reported by Dunagan and Driese (J Sed Res 69:772–783, 1999). Increased biological activity during sedimentation may account for low carbon isotope values where plants were abundant, but in shrinkage-dominated systems (those of clay-rich soil subjecting to wet-dry conditions), carbon isotopes will be largely inherited from the calcretic limestones in the land extending landward of the coast and not influenced by coastal processes (known as hinterland), such as Umm Ar-Rimam depression. This basin does not fit the classic shallow playa-type basins of the Arabian Peninsula but rather the recharge playas of the southwestern USA.     

<Emphasis>H</Emphasis>ydrological variability of the <Emphasis>S</Emphasis>oummam watershed <Emphasis>(N</Emphasis>ortheastern <Emphasis>A</Emphasis>lgeria<Emphasis>)</Emphasis> and the possible links to climate fluctuations

The long-term variability of rainfall in the Soummam watershed (NE Algeria) has been analysed over the past 108 years using continuous wavelet method in order to identify the interannual modes controlling the rainfall variability. Statistical analyses of rainfall timeseries have shown its distribution following five periods of time, limited by a series of discontinuities around 1935, 1950, 1970 and 1990. The continuous wavelet transform have demonstrated different low frequency modes: 2–4, 4–8, 8–16 and 16–32 years.The annual band is expanded during the full study period with some pics around 1905, 1920–1935 and 1960; it shows a negative long-term trend, in particular since the period 1970–1990 when a major change has been identified. Then, the relationships between climate patterns of North Atlantic Oscillation (NAO) and Southern Oscillation Index (SOI) and the hydrological variability in the frequency domain have been investigated; they have shown a mean explained variance of 40 and 24 %, respectively. Such variances are less obvious for the annual mode and increase for the interannual frequencies. The coherence suffer from high perturbations since the period 1970–1990 when the NAO (SOI) shifts from negative (positive) phases to positive (negative) ones. Such anomalies are responsible for significant changes of rainfall variability, emphasising the global warming effects.     

Investigation of moment-rotation relation in different joint types and evaluation of their effects on segmental tunnel lining

This paper presents the results of a numerical study that has been performed to investigate the different joint types that affect the moment-rotation relation and ultimate bending moment capacity of a joint. A 3D finite element method was adapted to establish elaborate numerical models of segments. To evaluate the possible differences in moment-rotation behavior between different joint types, 10 different joint types were simulated. Additionally, the effect of different joint types on behavior of a lining ring was investigated. The validity of the peridynamic simulation was tested by comparing results obtained in this paper against the results obtained in a study performed by Hordijk and Gijsbers. Observations of the results demonstrate that in a flat joint, the expanding of joint height increased the rotation stiffness of the joint in the linear branch, and accordingly, the ultimate bending moment of the joint increased. In the ring model, it was observed that the expanding of joint height led to the decreased of ring displacement and stress concentration in the joint. Whenever there were full surface contacts (contact two segment in total cross section) in the joints, the rotation stiffness of the joints in the linear branch became equal, and, as a result, the displacement in the ring model was the same in all joint types. In addition, it was observed that using a convex joint in the ring model increases the displacement of the ring. The ultimate bending moment of bolted joints was higher than that of joints without bolts, especially in the case of a negative moment.     

Groundwater pricing for farms and water user association sustainability

Tunisia has invested heavily in irrigation schemes to secure water supply. The management of irrigation systems has been denied to local water user associations (WUA). These WUAs are assimilated to a natural monopoly. They sell water to farmers at the unit operational cost (marginal production cost). Such a price does not allow for budgetary balance, which leads to a chronic deficit of these WUA. It also does not reflect the scarcity of the resource, a situation that contributed to irrigated area expansion, an increase in the agricultural water demand, and misallocation of the resource. Low cost recovery results in poor maintenance, infrastructure deterioration, and water distribution inefficiency. The purpose of this paper is two folds: (i) to propose an alternative price scheme which ensures cost recovery and water use efficiency and (ii) to examine the impact of this new price on the farms’ surplus. To achieve this goal, we assumed that irrigation’s water price increase will be necessary. A field survey of 75 farmers in the center of Tunisia was conducted to estimate the irrigation water demand function. We also used the data collected on 36 WUAs in the region to estimate the irrigation water production cost function using the OLS method for both demand and cost functions, and the peak and the non-peak irrigated demand functions (i.e., summer and winter). The methodology consisted of maximizing social surplus to derive optimal prices for both seasons. The main results show that an increase in price in the range of 11 to 15 % in the winter and 50 to 75 % in the summer results in 11 % decrease of the annual quantity consumed and in a 2 % increase in the social surplus.     

Characterization of the Tertiary reservoir in Khabbaz Oil Field,Kirkuk area,Northern Iraq

Tertiary reservoir represented by Jeribe, Anah, Azkand, and Azkand/Ibrahim formations has been studied from reservoir characterization point of view in Khabbaz Oil Field/Northern Iraq. Examined thin sections prepared from core rock samples which are selected from the wells Kz-8 and Kz-9 revealed the existence of different microfacies in which are varies types of porosity such as interparticle, intraparticle, moldic, vuggy, and fractures have been noticed. In addition to these different types of diagenetic features are represented mainly by cementation, dolomitization, recrystallization, and dissolution. The available log data for the wells Kz-11, Kz-14, and Kz-16 have been used in characterizing the reservoir properties of the studied formations. The detected lithologies from porosity logs showed domination of limestone, dolomitic limestone, and dolomites in addition to few thin beds of anhydrites in Jeribe Formation and thin beds of sand dominated lithologies in Azkand Formation. Clay content has been calculated from gamma ray log along the studied sections and appeared to be mostly of dispersed clay type as shown from density-neutron porosity crossplot of Thomas-Stieber. Correction from the effect of clay content has been done for all the measured sonic, density, and neutron porosities. The available porosity and permeability values which are measured from core tests in the well Kz-9 for the formations of Jeribe, Anah, and Azkand have been adapted to formalize the best equation for calculating permeability in the other studied wells which have no core test measurements but only log data (Kz-11, Kz-14, and Kz-16 wells). Depending on porosity, permeability, and shale content, the studied sections have been subdivided into seven reservoir units in the wells Kz-11 and Kz-16, and for eight reservoir units in the well Kz-14.     

Microstructure observations in the upper layer of the South China Sea

A general pattern for turbulent mixing in the upper layer of the South China Sea (SCS) is presented based on TurboMAP measurements in April and May 2010. The turbulence level decreased significantly overall from north to south, and weakened from east to west in the northern SCS. The average dissipation rate north of 18°N reaches 1.69 × 10^?8 W/kg, approximately six times larger than that south of 18°N. The mean mixing efficiency in the SCS is 0.2, with a maximum of 0.31 near the Luzon Strait. At one repeatedly occupied station located in the central deep basin, the dissipation rate varies diurnally in the mixed layer and pycnocline due to diurnal heating and cooling by solar radiation and local barotropic tide, respectively.     

Dynamical downscaling of future sea level change in the western North Pacific using ROMS

The future regional sea level (RSL) rise in the western North Pacific is investigated by dynamical downscaling with the Regional Ocean Modeling System (ROMS) with an eddy-permitting resolution based on three global climate models—MIROC-ESM, CSIRO-Mk3.6.0, and GFDL-CM3—under the highest greenhouse-gas emission scenario. The historical run is forced by the air-sea fluxes calculated from Coordinated Ocean Reference Experiment version 2 (COREv2) data. Three future runs—ROMS-MIROC, ROMS-CSIRO, and ROMS-GFDL—are forced with an atmospheric field constructed by adding the difference between the climate model parameters for the twenty-first and twentieth century to fields in the historical run. In all downscaling, the RSL rise along the eastern coast of Japan is generally half or less of the RSL rise maxima off the eastern coast. The projected regional (total) sea level rises along the Honshu coast during 2081–2100 relative to 1981–2000 are 19–25 (98–104), 6–15 (71–80), and 8–14 (80–86) cm in ROMS-MIROC, ROMS-CSIRO, and ROMS-GFDL, respectively. The discrepancies of the RSL rise along the Honshu coast between the climate models and downscaling are less than 10 cm. The RSL changes in the Kuroshio Extension (KE) region in all downscaling simulations are related to the changes of KE (northward shift or intensification) with climate change.